Hello Jacques,
I had enabled debugging for pppd, by didn't check syslog.conf :-(
Thanks for Your support !
Heinz
> > Is debugging info enabled for Bering RC3 pppd ?
>
> Pppd will write error messages and debugging logs to the syslogd
> daemon using the facility name "daemon". These messages may
> Can you dump
> ipchains -t nat -vnL
> and
> ipchains -vnL
#
ipchains: not found
Bering1.0 rc3, after a random time period, the internet disappears from
eth0.
I have to reboot Bering and
power-cycle the cable modem as well.
pump -s gives me addresses outside of RFC1918 (65.34.x.x), so I don'
- Original Message -
From: "Brad Fritz" <[EMAIL PROTECTED]>
To: "Patrick Teague" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, July 26, 2002 11:02 AM
Subject: Earthlink PPP connection info (was: Problem booting Bering RC3)
> > Not only that, but it seems to only give me fee
On Sun, 28 Jul 2002, George Georgalis wrote:
>
> Do you mean if you reboot it, it works again? Can you dump
> ipchains -t nat -vnL
> and
> ipchains -vnL
>
> to the list? Post again if you have trouble with this...
>
George -- the poster is running Bering so dumping ipchains isn't
relevant.
On Thu, Jan 01, 1970 at 12:46:00PM -0500, lbilyeu wrote:
>I'm using Bering 1.0 rc3 with roadrunner cable modem.
>
>My system initially works just fine.
>I can access the outside net from my NAT users.
>I can also login to the firewall and ping an external Domain as well as
>a direct address on th
I'm using Bering 1.0 rc3 with roadrunner cable modem.
My system initially works just fine.
I can access the outside net from my NAT users.
I can also login to the firewall and ping an external Domain as well as
a direct address on the internet at large.
After a while, the outside internet just
On Sun, Jul 28, 2002 at 02:14:06PM +0300, Vladimir I. wrote:
> Ray wrote about "[leaf-user] WISP drivers loaded but can't ping":
>
> > I managed to get WISP-Dist loaded and recognizing my Prism 2 based wireless
> > card with no problem but I can't get it to ping any of my other wireless
> > boxes
On Sun, 28 Jul 2002 09:39:48 EDT Dr. Richard W. Tibbs wrote:
> The Dachstein
> firewall has allowed access more-or-less continuously for several days
> now, since the last reboot. The "less" part has been that every so
> often it appears that DNS service "goes away", that is hosts become
>
>>But, here is an update on this rather wierd problem. The Dachstein
>>firewall has allowed access more-or-less continuously for several days
>>now, since the last reboot. The "less" part has been that every so
>>often it appears that DNS service "goes away", that is hosts become
>>unreachabl
Support Requests item #587696, was opened at 2002-07-28 07:10
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=213751&aid=587696&group_id=13751
Category: Release/Branch: Dachstein
Group: None
Status: Open
Priority: 5
Submitted By: Nobody/Anonymous (nobody)
Assigned
Thanks all on list for your patience.
I have been moving my entire household, so being focused on the firewall
for more than an hour at a time has been tough.
First, let me say that I will get the latest Dachstein (or other Berg)
floppy burned at first opportunity. One question at this point:
Wh
On Sat, 2002-07-27 at 22:48, Jacques Nilo wrote:
> Le Dimanche 28 Juillet 2002 01:55, Dan Harkless a écrit :
> > Jacques Nilo <[EMAIL PROTECTED]> writes:
> > Isn't this the kind of thing that should be sent to the leaf-announce
> > mailing list?
> >
> > I'm currently subscribed to leaf-user while
Ray wrote about "[leaf-user] WISP drivers loaded but can't ping":
> I managed to get WISP-Dist loaded and recognizing my Prism 2 based wireless
> card with no problem but I can't get it to ping any of my other wireless
> boxes. All are using the same type of card, 2 are using a standard Debian
>
I managed to get WISP-Dist loaded and recognizing my Prism 2 based wireless
card with no problem but I can't get it to ping any of my other wireless
boxes. All are using the same type of card, 2 are using a standard Debian
distro with wlan-ng and 1 is using Station Server. The are all using Ad-H
14 matches
Mail list logo
