On Thursday 26 June 2003 11:06 pm, Brent P. Gardner wrote:
> Does anyone know where I can find the ppp-dialup.lrp spoken of on this
> page?
I might be wrong, but it is likely the ppp package available here:
http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/leaf/bin/packages/uclibc-0.9/15/
--
~Lynn A
Lynn,
Thanks for the answer, but no, it's not a problem with the box. I have seen
this before on other boxes, but I was always able to find older (rev Bx)
NIC's in ower stock. The only thing we have left right now are rev C1.
I will see if I can find updated source for the modules.
Stefaan
> --
On Fri, 30 May 2003, Eric Spakman wrote:
Hi Eric,
> It costed some time, but there is a netsmpd package available for
> Bering_uClibc. You can find it on the "Bering_uClibc packages" page
> (http://leaf.sourceforge.net/mod.php?mod=userpage&menu=91004&page_id=4
> 0)
It does not seem to be there
Does anyone know where I can find the ppp-dialup.lrp spoken of on this page?
http://leaf.sourceforge.net/mod.php?mod=userpage&menu=91008&page_id=44
I apologize if this is obvious but I can't find it in the CVS tree or on any download
pages I can find at leaf.sourceforge.net. I also cannot find
I was justing visiting www.norhtec.com today and
inquired about their products. I got an email asking
what I intended to do with it. I replied and have yet
to hear back. I hope they sell to consumers.
--- bino-psn <[EMAIL PROTECTED]> wrote:
> Hi ..
> - Original Message -
> From: "Stefaan
Esoteric Windows browsing stuff GACK.
Windows Network Neighborhood uses Microsoft's NetBuei in a broadcast mode.
It uses 'Browse Masters' on each subnet etc. This stuff doesn't travel
across a router at all without a lot of specific help from the router (Cisco
routers can do this, but it cons
Hi ..
- Original Message -
From: "Stefaan Van Dooren" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, June 26, 2003 4:01 PM
Subject: [leaf-user] MicroPC
> Has anyone used one of these for LEAF ?
>
> http://www.norhtec.com/products/gp/index.html
>
> Stefaan
Dead link.
I cou
On Thursday 26 June 2003 07:10 am, Somerlot, Chris wrote:
> Actually what I get is:
>
> Module PagesUsed by
> ip_nat_irc 2176 0 (unused)
> ip_nat_ftp 2784 0 (unused)
> ip_conntrack_irc2880 1
> ip_conntrack_ftp3648 1
> 3c509
On Thursday 26 June 2003 08:32 am, Ruchira Datta wrote:
> Sorry for the long delay, I was commuting to work and so wasn't in a
> position to fiddle with the VPN clients.
[...]
> Thanks very much for your reply. Below is a sample of the routing table
> when I'm in Windows.
Well, the Windows routin
On Thursday 26 June 2003 09:54 am, Stefaan Van Dooren wrote:
[...]
> Now I'm preparing another box, same config, only the NIC's revision is C1.
> Problem : the NIC's aren't recognised anymore.
> Running KNOPPIX on the same box, loads via-rhine without a problem and I
> have a fully functioning box.
Finally there is an open-source solution to the 'hidden transmitter'
problem.
http://patraswireless.net/software.html
/steve
---
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner
Hi!
Im new to LEAF and I try to set up my first firewall. To connect to the
internet, I use an intern DSL-Modem from FRITZ. I searched the net for
some drivers and I found one at http://distro.kneschke.de, called
fcdsl.lrp. But there is no documentation at all! Is there anybody who
has already us
Ray Olszewski wrote:
> Second, as I said yesterday, my memory of the 3c509 driver is a bit hazy.
> But I believe it autodetects (properly configured) NICs and does NOT use
> the io= argument Patrick suggests below. The ne module Patrick uses is
> different from 3c509 in this respect; it has poor
At 05:13 PM 6/26/2003 +0200, Patrick Benson wrote:
"Somerlot, Chris" wrote:
>
> I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
> not sure the cards are setup right.
DId you try my suggestion of testing the cards one at a time, always in the
same isa slot? Assuming eth0
"Somerlot, Chris" wrote:
>
> I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
> not sure the cards are setup right. My ioports shows this for the cards:
>
> 0300-030f : 3c509
>
> My interrupts shows:
>CPU0
> 0: 128443 XT-PIC timer
> 1:
Hi,
I'm running several Dachstein based firewalls, all kernel
2.2.19-3-LEAF-RAID.
In all the boxes I have 2 or 3 DLINK DFE-530TX network cards (rev A1 trough
B3, I think).
All use the modules pci-scan and via-rhine without any problem.
Now I'm preparing another box, same config, only the NIC's re
Hello,
> Have you tried just having one 3c509 card in the machine?
> The cards may all be at same io port.
> Are the cards in plug and pray mode? I think linux may not
> like that! You may need to use the dos setup program to set
> cards up. HTH.
I agree. I have 2 3c509 cards. Nothing works un
Sorry for the long delay, I was commuting to work and so wasn't in a
position to fiddle with the VPN clients.
On Tue, Jun 10, 2003 at 09:33:27AM -0500, Lynn Avants wrote:
> On Monday 09 June 2003 04:02 pm, Ruchira Datta wrote:
> > I realize I probably need to provide a lot more specific informatio
Dear Sir,
My name is William Ume,
Presently,I am working in an African country.
I got your contact via the internet and felt you may be willing to pursue this with me.
This proposal may sound strange to you or probably you may even think it is a
joke,because of lots of funny mails circulatin
Have you tried just having one 3c509 card in the machine?
The cards may all be at same io port.
Are the cards in plug and pray mode? I think linux may not like that!
You may need to use the dos setup program to set cards up.
HTH.
On Thu, 26 Jun 2003, Somerlot, Chris wrote:
> Date: Thu, 26 Jun 200
I've tried 2 different sets of ISA 3C509 cards, get the same problems. I'm
not sure the cards are setup right. My ioports shows this for the cards:
0300-030f : 3c509
My interrupts shows:
CPU0
0: 128443 XT-PIC timer
1:881 XT-PIC keyboard
2:
Actually what I get is:
Module PagesUsed by
ip_nat_irc 2176 0 (unused)
ip_nat_ftp 2784 0 (unused)
ip_conntrack_irc2880 1
ip_conntrack_ftp3648 1
3c509 8484 0
> -Original Message-
> From: Tony [mailto:[EMAIL P
Nope, I thought that too.
I was mistaken. I confused that driver with another card's driver I was
using (smc-ultra).
The 509 driver will find all the cards inside the box.
Here is an abbreviated copy of what my dmesg looks like:
PIIX3: not 100% native mode: will probe irqs later
h
Has anyone used one of these for LEAF ?
http://www.norhtec.com/products/gp/index.html
Stefaan
---
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Ma
If I remember correctly, if you have more then one 3C509, you'll have to
specify the io & irq for both cards when you load the module. It only probs
for one card automagically.
Stefaan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Somerlot, Chris
Sent
25 matches
Mail list logo
