You don't nee natsemi.o and tulip.o for 3com 3c905 Nics. Comment them out.
They are for tulip and national semiconductor chipset NICs
Huy
- Original Message -
From: "Darcy Parker" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 21, 2003 9:00 AM
Subject: [leaf-user] Opera
Hi all
I am trying to set up a subnet to subnet ipsec tunnel with PSK.
I have use ipsec before with Dachstein version. There fore i am familiar
with ipsec config
I can not seem to get it to work with Bering 1.2
I can bring the ipsec connection up and down without problem. And i can see
that key neg
IL PROTECTED]>
> To: <[EMAIL PROTECTED]>; "Huy Bui" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Saturday, August 23, 2003 8:44 PM
> Subject: RE: [leaf-user] Ipsec on bering 1.2
>
>
> > Sorry, but I have changed my ISP without changing my
Hi
I am using Bering 1.2. I would like to add multiple ip of the same subnet to
the external interface eth0.
I try using the following in the interfaces file
auto eth0
iface eth0 inet static
address A.B.C.118
masklen 29
broadcast A.B.C.119
gateway A.B
On the XP Box you should add
Route add -p 192.168.51.0 MASK 255.255.255.0 192.168.50.1
the -p make the route permanent. and the next hop to 192.168.51.0 should be
the eth0 on the bering box
Huy
- Original Message -
From: "James Neave" <[EMAIL PROTECTED]>
To: "Dave Hunt" <[EMAIL PROTECTE
I think you have to use /dev/sda instead of /dev/sda1
Have you try with a 1.44 formated floppy instead of 1.68.
I use to have a similar prblem with a IDE LS120 drive booting a floppy.
Bering recognise it as /dev/hdc. It only work with 1.44 format since I did
not know how to specify the size of the
You have to modify /etc/POSIXness.conf to setup mail settings and then
modify /etc/crontab to add a line such as
30 12 * * * rootmail -a "/var/log/*.log" [EMAIL PROTECTED]
This mean mail all log at 12.30pm everyday
Huy
- Original Message -
From: "Felix Theodor" <[EMAIL PROTECTED]
anyone have a working mgmt.o would you send me one.
Thanks
Huy Bui
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us
edtouch 330 USB ADSL modem
> Try http://speedtouch.sourceforge.net/
>
> There is an English version of that page and in the
> download section there is copy of the mgmt.o .
>
> > -Original Message-
> > From: Huy Bui [mailto:[EMAIL PROTECTED]
> > Sent: Wednesday, Nov
P.S Would someone still point me to the direction of building packages for
LEAF. I have been using Linux for a few year. I know how to patch and
compile kernel and aplication but not to put them in to a package.
- Original Message -
From: "Jacques Nilo" <[EMAIL PROTECTED]
Thanks Jacques
It work perfectly. I can dowload beetween 113-120kB/s on the 1Mbits ADSL
now. No error at all.
Thanks again
Huy
- Original Message -
From: "Jacques Nilo" <[EMAIL PROTECTED]>
To: "Huy Bui" <[EMAIL PROTECTED]>; "Luis.F.Correia"
<
Hi all
Have anyone come accross a wierd problem that I have. I have a ADSL 1Mb with
USB Alcatel Speedtouch. The download speed is alway good greater than
100Kbytes/s but if I try to send mail, ftp or scp anything > 50k it would
send about 10k per minute. It does not matter where the files are (on t
Also I forgot to say that I can not see any error in any of the log file
Huy
- Original Message -
From: "Huy Bui" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, December 01, 2003 10:24 AM
Subject: [leaf-user] Problem with upload file > 50k on Bering
Hi
Would some one please tell me what are the above modules are for? I am
assuming they are for MSN Messenger.
I am trying to setup MSN Mesenger voice conversation. I keep getting connect
request timeout. I know that MSN connect back on a range of dynamic UDP/TCP
ports from 4000 to 65000.
I am usin
Hi Luis
I would expect shorewall to be the same on both Bering Version.
Do you just use the basic shorewall config straight out of the box? I do
Which Version of MSN do you use? I use version 6.0
Do you have to do any special setup for MSN such as http proxy or socks
proxy?
Thanks
Huy
- Origina
I dont have Pix but I do have a Win2k pptp server behind a LEAF Bering
You neet to port forward TCP 1723 and IP 47 (GRE) to your Pix.
Huy
- Original Message -
From: "Lynn Avants" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 06, 2004 5:09 AM
Subject: Re: [leaf-user] In
Then you need to load the ip_masq_pptp.o (kernel 2.2) for client behind LEAF
to work.
Huy
- Original Message -
From: "Matthew Schneider" <[EMAIL PROTECTED]>
To: "'Lynn Avants'" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, January 06, 2004 10:43 PM
Subject: RE: [important] Re:
-v
Huy
- Original Message -
From: "Matthew Schneider" <[EMAIL PROTECTED]>
To: "'Huy Bui'" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, January 07, 2004 11:33 PM
Subject: RE: [important] Re: [leaf-user] Inside Client PPTP C
chain with
ipchains -F INPUT
and
ipchains -P INPUT ACCEPT
then try to connect and check the log
Huy
- Original Message -
From: "Matthew Schneider" <[EMAIL PROTECTED]>
To: "'Huy Bui'" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursd
Have you try the option:
up svi dhcp restart (or up /etc/init.d/dhcpd restart) for eth2 in your net
config
I use this for my with Bering 1.2
Huy
- Original Message -
From: "Scott Merrill" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 20, 2004 3:57 AM
Subject: [leaf-use
> Huy Bui wrote:
> > Have you try the option:
> > up svi dhcp restart (or up /etc/init.d/dhcpd restart) for eth2 in your
net
> > config
> > I use this for my with Bering 1.2
>
> Where, exactly, do I put this?
>
For my system I put this in the interfaces setti
Hi all
I am looking for a couple of PCI wireless card that support 54g to use with
leaf. Any of you using or can recommend one. Especially if one that i can
get here in the UK
Thanks
Huy Bui
---
This SF.Net email is sponsored by: IBM Linux
Firstly I don't think your bering does not know the route to the Netgear. So
it try to route anything for 192.168.2.0/24 through the default gateway
which is eth0.
Secondly your game PC is behind the netgear so it's is probalby being NATed
by the netgear.
I don't know much about the Netgear set
roblem I'm having because the Netgear is a router? If the
Netgearwas just a switch would what I have set up work?
Would a better solution be to turn my leaf box into a wireless
router and
get rid of the Netgear?
Thanks in advance,
Barry
-Original Message-
From: Huy Bui [EMAIL PROTECTED]
Se
I have just install 2.4 released and i have the same problem
I run it on a Soekris net4801-50.
Here's the packages I use
lrp="root config etc local modules iptables keyboard shorwall ulogd dropbear
dnsmasq mhttpd webconf mawk libm lpthread ipsec ntpdate"
Thanks
Huy
- Original Message -
esnot seem to be any pattern in the time it fail. Some time a
couple of hours sometime after 12-13 hours.
It have been running for about 10 days
Huy
- Original Message -
From: "Huy Bui" <[EMAIL PROTECTED]>
To:
Sent: Friday, March 31, 2006 3:55 PM
Subject: Re: [leaf-user]
Hi
I am setting up a Bering uClibc 2.4 Release ipsec VPN with a old Bering 2.0
at one of our hosting center. Although the tunnel working perfectly when
ever i type in any ipsec command such as ipsec eroute, ipsec manual con_name
up, ipsec help ect. It alway faill with the following
/usr/sbin/i
Hi All
I am using LEAF UCLIBC 2.0 at the momnent. I would like to do some bandwidth
throttling for some of our test PC so that they can only download at a maximum
of let say 100Kbit/s to see what happen if our site is view over a slow
connection.
Is there any package and/or documentation on how
Hi All
I am using LEAF UCLIBC 2.0 at the momnent. I would like to do some bandwidth
throttling for some of our test PC so that they can only download at a
maximum of let say 100Kbit/s to see what happen if our site is view over a
slow connection.
Is there any package and/or documentation on how
, November 13, 2006 8:41 PM
Subject: Re: [leaf-user] Bandwidth throttling
> Am Montag, 13. November 2006 13:26 schrieb Huy Bui:
>> Hi All
>> I am using LEAF UCLIBC 2.0 at the momnent. I would like to do some
>> bandwidth throttling for some of our test PC so that they can on
e out
put of
tracert -d -h 3 192.168.1.254
Huy
- Original Message -
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: "Huy Bui" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, March 29, 2007 4:01 PM
Subject: Re: [leaf-user] Ping failed to server in DMC
> &g
I had never work out how to do it from the modules setting so what I did was
using the ethtool.lrp package and have the following in the interface file
for eth0
pre-up ethtool -s eth0 autoneg off speed 10 duplex full
I hope this help. I use an soekeris board with 3 interface for my gateway
H
Hi All
Are there anyone using the snort.lrp package. If so you do you keep the
rules up to date?
Thank you.
Huy
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report
33 matches
Mail list logo