I have Squid running on dachstein-rc2-1680.exe and would like to redirect
all internal port 80 requests to the default Squid port of 3128 on the LRP
box.
I have read through the archives and found very little of use.
What is the best way to do this?
Thanks & Regards,
Kevin
___
Kevin Kropf wrote:
> I have Squid running on dachstein-rc2-1680.exe and would like to redirect
> all internal port 80 requests to the default Squid port of 3128 on the LRP
> box.
>
> I have read through the archives and found very little of use.
>
> What is the best way to do this?
This is in
on this.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David
Douthitt
Sent: Tuesday, December 11, 2001 5:32 PM
To: LEAF Users List
Subject: Re: [Leaf-user] Squid redirect dachstein floppy
Kevin Kropf wrote:
> I have Squid running on dachstein-rc2-1
-Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Kropf
> Sent: Wednesday, December 12, 2001 1:18 AM
> To: [EMAIL PROTECTED]; Leaf-User (E-mail)
> Subject: RE: [Leaf-user] Squid redirect dachstein floppy
>
>
> I am not that
Kevin Kropf wrote:
> > I am not that familiar with ipchains and was hoping for a little more
> > detail.
> > I put together the following command from the info on the squid FAQ:
> > $IPCH -A input -p tcp -d 0/0 80 -j REDIRECT 3128
> > However I am not sure what else is needed and where to put it i
ns.output and ipchains.forward
> cabability so you could extend the rules w/o editing the ipfilter.conf
> directly.
>
> - Todd
>
>
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Kropf
>
Todd Pearsall wrote:
> On a related note, I was having problems after I started using squid on a
> dachstein CD (default RAM disk size) on a P75 with 32MB of RAM. After
> installing squid it would work fine for a while and then I'd start
> periodically seeing messages like:
> VM Process Killin