On Wednesday 08 January 2003 05:08 pm, Chris Low wrote:
The disk that came with the NICs wanted me to compile a driver from the
source code rtl8139.c, then copy it to /lib/modules/2.2.14-5.0/pcmcia then
edit the /etc/pcmcia/config file and the linuxconf. How do I do this? or,
is there an
]
Sent: Wednesday, January 08, 2003 4:43 PM
Subject: Re: Fw: [leaf-user] Dachstein CD with Realtek 8139 NICs
Just checking,
so all I have to do then is uncomment the pci-scan line and add another
line that says rtl8139 and it should work?
Thanks,
Chris
At 03:49 PM 1/8/2003, you wrote
Great! Thanks for the confirmation. I'm running into another issue though,
when I run the unmount /mnt command after making changes to config files on
the floppy I get the following msg:
Unmount: not found
Did I burn a bad copy of the CD or is there something I'm doing wrong?
Chris
At 06:48
try umount not unmount
- Original Message -
From: Chris Low [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 09, 2003 8:36 PM
Subject: Re: Fw: [leaf-user] Dachstein CD with Realtek 8139 NICs
Great! Thanks for the confirmation. I'm running into another issue though,
when
At 11:36 AM 1/9/03 -0800, Chris Low wrote:
Great! Thanks for the confirmation. I'm running into another issue though,
when I run the unmount /mnt command after making changes to config files
on the floppy I get the following msg:
Unmount: not found
Did I burn a bad copy of the CD or is there
Hi,
I'm trying to set up Dachstein to run with two NICs based on the Realtek
8139 chipset. I don't have much linux experience so I need simple and
specific walk-through instructions. The most pressing question I have right
now is:
The disk that came with the NICs wanted me to compile a driver
will send you the sample.
Hope that helps.
- Original Message -
From: Chris Low [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 08, 2003 3:08 PM
Subject: [leaf-user] Dachstein CD with Realtek 8139 NICs
Hi,
I'm trying to set up Dachstein to run with two NICs based
Just checking,
so all I have to do then is uncomment the pci-scan line and add another
line that says rtl8139 and it should work?
Thanks,
Chris
At 03:49 PM 1/8/2003, you wrote:
You should not have to compile anything. The module is already on the CD.
Just edit the file /etc/modules to declare