Tim,
Very cool designs! I haven't seen any specifics on how you are doing it but
I've seen a few hints! If i were to guess, I would say you are using the TK
reciprocator (or a modified version) and driving/cranking the lathe
spindle. I would think this would make your X-axis oscilate while the
Hi Andy,
The reciprocator limits the travel of the spindle to forwards and backwards
motions so you will not get a rotation of the turn table. Just a partial
rotation. This would create an oscillating pattern but because of the drive
ratio of the rotary table the pattern is not effective. A
Yes. But if you are hand cranking the spindle (instead of the X-axis)and
reversed the recipocator mounting, you would make the X-axis oscillate
(Travel in the positive and negative direcion on the X-axis). I just don't
know if it would work given the factory pitches.
--
You received this messa
Oh, I see, you might have something there. Rocking the leadscrew back and
forth to get the pumping action. I don't think this would work because the
leadscrew is 1/4" pitch per revolution of the screw. Your range on the
reciprocator is about 1/4 turn or a little more so you would only get 1/6
I purchased a used 1000EX Legacy and I sorry to say I have not even turned
it on. I was wondering; first is anyone interested, and second how should
I present it. I have VCR tapes, router bits, and the unit. I was hoping to
make a CNC machine out of it but after reading about doing it I would be
b
Where are you located?? That will help a lot of people.
Bruce
--- On Mon, 8/13/12, Harvey Matyas wrote:
From: Harvey Matyas
Subject: Selling my Legacy
To: legacy-ornamental-mills@googlegroups.com
Date: Monday, August 13, 2012, 5:45 PM
I purchased a used 1000EX Legacy and I sorry to say I
I'm located in Greendale WI which is a little south of Milwaukee, I'm about
a mile south of Southridge which is a bif shopping center (At least in
Milwaukee).
On Mon, Aug 13, 2012 at 7:45 PM, Harvey Matyas wrote:
> I purchased a used 1000EX Legacy and I sorry to say I have not even turned
> it on
Do you have a coupler? I am not sure if that is the correct term. Looks like a
universal shaft , connects the table to the headstock and you can use any gear
you want.
Sent from my HTC on the Now Network from Sprint!
- Reply message -
From: "Tim Krause"
Date: Mon, Aug 13, 2012 4:28 p
if you choose to separate i would be interested in all the router bits and will
give you very good prices
Bill
- Original Message -
From: Harvey Matyas
To: legacy-ornamental-mills@googlegroups.com
Sent: Tuesday, August 14, 2012 10:45 AM
Subject: Selling my Legacy
I purcha