the bone discs now is much better
then what he is doing because of the lengths of the discs.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Fri, Sep 27, 2024 at 11:17 AM 'Curt Ge
. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Fri, Sep 27, 2024 at 10:24 AM 'Curt George' via Legacy Ornamental Mills
wrote:
https://bridgecitytools.com/products/pp-1-pencil-precision
I have to admit, I
Best of LUCK Dan.
I for one, ONLY cut in one direction, even when the screw is true, I don't
trust it, to Not have back-lash.
I think your next step will be to make or get a motor drive for your machine.
(hand cranking stinks! Once you have a motor drive, you can NEVER go back.) ;-)
C.A.G.
O
Hello everyone.I am always looking for better ways to get the job done.On this
video, his method of squaring off the ends of the blank arevery nice. SIDE
NOTE: his method might be better then mine for trueing up my bone blanks? I
will be playing around with this idea, more latter.
https://www.
Good Deal Dan.Thanks, for the up-date. ;-)
C.A.G.
On Friday, September 27, 2024 at 11:58:13 AM EDT, cdkr...@gmail.com
wrote:
First cutting test. A 2" square red oak stick, bottom cleaning bit, 90T
feed, 180T/22T duplex, 88T index (i.e. 8:1) = one pass square to cylinder.
Depth of c
https://bridgecitytools.com/products/pp-1-pencil-precision
I have to admit, I think this is pretty neat. watch the video.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails
Thanks Dan.
"Full speed ahead"!
Cant wait to see how it all works out of you. ;-)
C.A.G.
On Friday, September 27, 2024 at 09:46:13 AM EDT, cdkr...@gmail.com
wrote:
I have power feed on three of my other machines and seldom use it. It's good
for "production" but I tinker. The chart wa
money.
I really need one more for change over times etc...
More later
Kind regards
Tim J Ziegler
On Wed, Sep 25, 2024, 7:25 AM 'Curt George' via Legacy Ornamental Mills
wrote:
Wow, they are doing Demo's again. That's Awesome!
The only problem is, t
, Sep 25, 2024 at 5:00 PM 'Curt George' via Legacy Ornamental Mills
wrote:
Woops! I hit send when I was trying to post some photo's. (sorry about that.)
;-)
Not much for show and tell. but gluing up 16 blanks takes up a lot of time. The
whiter blanks on the right were what I d
Hey Bill
I agree, Easy tool comp. is top notch. I do like there tools a lot.
My only question on this QC jaw chuck, was how it compare's with the other big
woodworking tool company's out there chuck's. (I own Nova and Pen State brands
for my chucks.) The Funny part here is, I still prefer Legac
Hi Everyone.
Got some shop time today.I glued up 16 new bone blanks, for future bone
ventures.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy
Wow, they are doing Demo's again. That's Awesome!The only problem is, they are
not coming to my area. ;-(
So Tim. How do you like the Easy Chuck? It looks nice. But is it worth the
price?
C.A.G.
On Wednesday, September 25, 2024 at 07:01:33 AM EDT, Tim Ziegler
wrote:
Some good stuff
Good deal Dan.
Cant wait to see how it works. getting a smooth flat cut will become much
easer form not on.
The Next thing you need to be us make new indexing charts for your gears. a x4
gear set will become your standard... ;-)
C.A.G.
On Tuesday, September 24, 2024 at 06:53:41 PM EDT, cdkr
HI Dan
I went with a 5/8-8 vs the 5/8-4 (the original acme screw that came with the
Legacy.) I had very good results with this change over.Your 3/4-16 reduce your
pitch by 4 x, As Mike said those are some small pitches. Getting a very clean
cut will be much easer to do with those kind of pitch
Hello. This a lathe / machining video, Its pretty straight forwardAny Legacy
user could do pretty much the same things.(perhaps even better then he did?)I
did enjoy watching his video. (He has a number of good videos that I feel many
in the group would like to see. I recommend that you check the
K
On Saturday, September 21, 2024 at 6:02:20 PM UTC-4 Ed Trevillian wrote:
Impressive.Ed Trevillian
On Sat, Sep 21, 2024, 5:30 PM 'Curt George' via Legacy Ornamental Mills
wrote:
As I see this. 35% angled jig, connected to the Legacy's headstock, would and
could make some neat t
serif;color:windowtext;}#yiv8892592948
.yiv8892592948MsoChpDefault {font-size:10.0pt;}#yiv8892592948 filtered
{}#yiv8892592948 div.yiv8892592948WordSection1 {}
https://www.magnate.net/ProductDetails.asp?ProductCode=A12WT
so they do
Bill
From: 'Curt George' via Legacy Ornamenta
37 PM 'Curt George' via Legacy Ornamental Mills
wrote:
C.A.G.
On Wednesday, September 18, 2024 at 12:34:28 AM EDT, 'Curt George' via
Legacy Ornamental Mills wrote:
These are not mine. But something that I found on FB Market place.I find
these look like somethi
Hey Guys
Magnate.net sells it
...https://scontent-ord5-1.xx.fbcdn.net/v/t39.30808-6/458946086_122140979378281313_130286714652297246_n.jpg?stp=dst-jpg_p180x540&_nc_cat=1&ccb=1-7&_nc_sid=127cfc&_nc_ohc=swMVG4K7QSkQ7kNvgFvMKtW&_nc_ht=scontent-ord5-1.xx&oh=00_AYCRJLESuGGDYbAkUUkp8I5JsEajmVLp7DcENlEOY
Good stuff !
Thanks Tim.
C.A.G.
On Tuesday, September 17, 2024 at 10:39:04 AM EDT, Tim Ziegler
wrote:
Hey guys and gals,
Shopsmith is here for you again. Check out this discounted sale.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Hello Everyone.this is more a lathe technique vs Legacy. But having said that,
I do think that the Legacy could do something similar.I thought it was neat!
so I wanted to share the idea.
Wood turning an Excavated Dodecahedron - Part 1 (youtube.com)
Woodturning Excavated Dodecahedron - Part 2
Hello and Good morning everyone.
Although the answer that I wrote to Ken was correct, I would like to add a
few things to my answer.
I really like to look and feel of bone, (I think it looks like Ivory,)
Sadly after finding out how well bone turns, and seeing the true beauty of
this material.
I second that. I miss our talks. let him know that he and his family are in
our prayers.
C.A.G.
On Sunday, September 8, 2024 at 11:27:52 PM EDT,
wrote:
Some good news and some not so good news for Arkady we all wish him well
Bill
From: legacy-ornamental-mills@googlegroups.c
e:
71 I’m starting to think you might like making templates more than using them
curt 😊
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 9 September 2024 9:59 AM
To: Legacy ornamental mills
Subject: Making Stainless steel templates for the Legacy
Hi Guys. (just got home.)
I like those hold down clamps. Thank you Mac.(I don't know if I will buy them,
But I do think that they are neat.)
C.A.G.
On Saturday, September 7, 2024 at 10:33:50 PM EDT,
wrote:
I saw that mac but I’m not a fan of marking the timber
Bill
From: l
good night.
C.A.G.
On Sunday, September 1, 2024 at 08:50:56 PM EDT, Ccm Ccm
wrote:
Nice work
On Saturday, August 31, 2024, 'Curt George' via Legacy Ornamental Mills
wrote:
I was asked why I have not been turning bone as late? The answer is, this
summer has been very busy for
roadworthy
for registration amazing right what a coincidence
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, 1 September 2024 11:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Aug. 31 bone turning.
Hey Bill
Thank you.
For me th
, 2024 at 05:11:32 AM EDT,
wrote:
I hear you about no shop time ☹ and what can you say about the turning but
great as you always do
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, 1 September 2024 9:53 AM
To: Legacy ornamental mills
Subject: Au
. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Fri, Aug 30, 2024 at 11:45 PM 'Curt George' via Legacy Ornamental Mills
wrote:
$80.000 is close to what I paid for my home. "MAN" the New CNC's
ng
new, at the same time. ;-)
Talk to you more later.
C.A.G.
On Saturday, August 31, 2024 at 08:29:15 AM EDT, 'Curt George' via Legacy
Ornamental Mills wrote:
- Oyo Lito
- From:oa4...@gmail.com
Sat, Aug 31 at 2:08 AM
Hi Curt, sorry for the late reply. I've
- Oyo Lito
- From:oa4...@gmail.com
Sat, Aug 31 at 2:08 AM
Hi Curt, sorry for the late reply. I've been so busy with work lately. My intro
message is;
Hello all, I'm Oliver the type of wood working I do is carpentry pertaining to
the construction of home ie framing, siding
$80.000 is close to what I paid for my home. "MAN" the New CNC's are priced
to high for me.
I wish Legacy luck, but I still think they were foolish , throwing the baby out
with the bath water. (so to speak) The machines that they made in the past, are
worth something! but As they see it ,Its a
I can see some very real possibility's for that 500. But sadly not in my shop.
The funny thing here is I own a 500 (its no ware close to, As nice as what you
are selling Richard.) mine has the steel rails and only one set of plastic
gears. One day I will find the time to re-work this machine, a
Wow! that's Neat !
I wonder how much those table mountings cost? those just might be able to use
on the manual machines as well.
C.A.G.
On Friday, August 30, 2024 at 07:06:54 AM EDT, Tim Ziegler
wrote:
Yeah I saw that the other day. Pretty impressive. for sure. Thanks for sharing
Hello and Good morning Ralph.
No I had no idea that Ron Brown owned a Legacy CNC. And I am more impressed
that you know him and talk to him on the phone. Relationships/Friends are
becoming harder to make these days, When you find a good one, Hold on with both
hands, you don't want to loose it.
Hello Dan
If you could do that, I think you just might find a market for your
services.Please let us know.
C.A.G.
On Thursday, August 22, 2024 at 09:23:41 AM EDT, cdkr...@gmail.com
wrote:
I would consider making a bunch if I could find a place to laser cut the
outline and holes. I cou
Hello Ken
If I'm Honest with you. I do not know? I would guess on your wants/what you
need, and how many?Its a pretty simple device. a steel bracket, with 4 prongs
and 5 mounting holes. any one with a jig saw or any metal cutting tools could
make them, themselves with some time.I've made my o
HI Guys.
Its sad that Legacy stopped making these hubs. (I think they were the best
holding system on the market, And still do.)
Tim are you going to ask your guy, to make more hubs? and if so how many and at
what price, dose he think they will cost? I have made some of my own hubs in
the past,
Welcome to the Group Dick.
The Legacy is a very good tool, but it can take some time to learn how to fully
use it, to its fullest potential.
Its not hard, (Hey, If I can do it, Anyone can learn how to use the Legacy.) ;-)
Have a good night.
C.A.G.
On Friday, August 16, 2024 at 12:13:50 AM ED
:
No if everyone pitches in I will fly out. lol I wish.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Mon, Aug 12, 2024 at 6:02 PM 'Curt George' via Legacy Ornamental Mills
Bill
Perhaps a tram of sorts could be made to hold your camera while shooting?
something like this, https://www.youtube.com/watch?v=xe8gtlRbQgY OR
https://www.youtube.com/watch?v=GE37xI14Fyw
C.A.G.On Monday, August 12, 2024 at 06:38:32 PM EDT,
wrote:
You got it that’s why many of my v
Good morning guys!
I cant wait to see your newest video, Bill
I know the 90 deg. is the angle you like, but what pitch will yoube using,
Bill? Like the writer stated. 5-6 is common, 2 TPI makes a drastic pitch.
NOW the question is how many starts will be needed to make this screw?
Talk to you a
shaft could dislodge the clip.
Tim Maxwell
On Friday, August 9, 2024 at 1:03:19 AM UTC-4 Curt George wrote:
Tim this is not a good photo. but its the only one that I can find at this
time.
C.A.G.
On Friday, August 9, 2024 at 12:41:47 AM EDT, 'Curt George' via Legacy
Ornamental Mi
Tim this is not a good photo. but its the only one that I can find at this
time.
C.A.G.
On Friday, August 9, 2024 at 12:41:47 AM EDT, 'Curt George' via Legacy
Ornamental Mills wrote:
Hello TimDepending on the modal of Legacy and the year, the locking pin
changed a li
Hello TimDepending on the modal of Legacy and the year, the locking pin
changed a little,On my 1000ex there was a spring and bracket and a spring
retaining ring to hold the indexing system together.The spring and bracket
worked on friction to hold the lock away form the indexing gear when you w
ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Wed, Aug 7, 2024 at 7:50 AM 'Curt George' via Legacy Ornamental Mills
wrote:
https://www.youtube.com/watch?v=2CbhNxbl-EQ
( I AM SEPERATING THIS TOPIC FO
I cant wait ;-)
C.A.G.
On Wednesday, August 7, 2024 at 09:54:58 AM EDT,
wrote:
When I get back in my shop I will do a video of it making a square spiral for
you curt
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, August 7, 2024 1
https://www.youtube.com/watch?v=2CbhNxbl-EQ
( I AM SEPERATING THIS TOPIC FOR MORE CLARITY)
Bill, this is one Neat jig that you made. But I for one am at a bit of a loss,
to figure out how to use it.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Orn
Very Nice Video Bill.
When asking about the Legacy and turning on a lathe, I like to tell people
the two machines do the same things, but differently. I don't choose on
over the other, (as a matter of fact, I like to both machines together to
get the best out of each machine.) But as you can se
Hey Tim.
I like it! Nice job on that . Quick question, why hickory not another type of
wood for your transition molding strips?
C.A.G.
On Saturday, August 3, 2024 at 10:24:14 AM EDT, Tim Ziegler
wrote:
Finished up the transition moulding strips yesterday.I have added a couple
pic's
Nice job Tim!Keep up the good work. ;-)
C.A.G.
On Thursday, August 1, 2024 at 10:10:07 PM EDT, Tim Ziegler
wrote:
Good evening,
Working on some transition moulding strips on my 1200 today. I maybe should
have used my long moulding board, which is on my 1500 and I did not want to
This is what Dreams are made from. ;-)Enjoy!
C.A.G.
Steve Johnson has a Holtzapffel lathe, #1741 he is looking to sell. he
describes it as:
Not much is known of the history of this lathe, but it is one of the best
equipped Holtz's still in existence, with a full height Cuban Mahogany cabinet
e
Hello there everyone.
Tim. I would suggest that having this Jimmie E-mail directly for sales a good
idea.But since all of these tools are high dollar amounts, I think photo's of
these tools would help,both our members and his/Jimmie's sale potential.
I wish you the best of luck on the sales o
Neat saw.I'm sure is could cut down a Legacy 1800 and make it into two 900's.
;-p
Sorry! with all kidding aside .
Thanks Tim, that saw looks to be pretty nice.
C.A.G.
On Wednesday, July 10, 2024 at 04:17:57 PM EDT, Tim Ziegler
wrote:
Not sure how we can tie this in with our LOM's but I
"Man" that's neat !
Could be used on a Legacy, (almost?)
C.A.G.
On Tuesday, July 9, 2024 at 11:08:23 PM EDT, wrote:
Yea I saw that lol
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, July 9, 2024 11:45 PM
To: LOM Group
Subject: F
Kind Regards,
Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC 14171
160th Ave. Foreston MN 56330
320-294-5798 shop 320-630-2243 cell
On Sun, Jul 7, 2024 at 9:51 PM 'Curt George' via Legacy Ornamental Mills
wrote:
I don't think I own blue
t Curt? That is how the guys get dye and stabilization
to happen in the game call world. Not sure the length of time it would take to
permeate into bone but worth a try. Just something to think about.
Kind Regards, Timothy J. Ziegler On Sun, Jul 7, 2024 at 9:51 PM 'Curt George'
vi
wrote:
I don’t know red or perhaps blue
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, July 8, 2024 12:21 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Red bone
HI Bill
Perhaps? but I think the colors will only hold onto were the red
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, July 8, 2024 9:41 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Red bone
I agree with you Bill.
But in this case One bone had a red tint that just stood out to much.
I figured, why not try? I sanded the
Hello
I just wanted to wish everyone the very best on this holiday.
Have a Great day. Get into the shop and make something. ;-)
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receivin
ards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Tue, Jul 2, 2024 at 8:25 PM 'Curt George' via Legacy Ornamental Mills
wrote:
The funny thing here is, I already have a few gal. of vinegar . I u
LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Tue, Jul 2, 2024 at 8:05 PM 'Curt George' via Legacy Ornamental Mills
wrote:
Hello Everyone.
I would like to welcome a number of new members to the group.
Please be advised that it take a number of e-mails (ap
oreston MN 56330
320-294-5798 shop320-630-2243 cell
On Tue, Jul 2, 2024 at 7:30 PM 'Curt George' via Legacy Ornamental Mills
wrote:
Hello Everyone. (I'm back!)
This story/vinegar bending is a new one to me! I like it. Nice find Bill.
C.A.G.
On Tuesday, July 2, 2024 a
Hello everyone.this video is nice, But the nicest things about it, is... WE
the LOM userscan do things like this, on our mills.
https://www.youtube.com/watch?v=wuAjt2zd1AA
Remember, "Legacy, the Only Imitation, is your emanation".
C.A.G.
--
You received this message because you are subscribed
Wow! Tim.
That's Awesome. I cant wait to see more.
I really Like it !
C.A.G.
On Saturday, June 29, 2024 at 11:38:37 AM UTC-4 timjz...@gmail.com wrote:
> For sure Bill.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx LLC
> 14171 160th Ave.
> Foreston
Hello Everyone.
I would like to welcome a number of new members to the group.
Please be advised that it take a number of e-mails (appx. 5) send to the group
in order to get full access for the posting of the group, without having me or
Tim K. grant access for posting messages to the group.
To eve
Hello Everyone. (I'm back!)
This story/vinegar bending is a new one to me! I like it. Nice find Bill.
C.A.G.
On Tuesday, July 2, 2024 at 06:53:40 PM EDT, Shuai Robert
wrote:
Also I've heard of ammonia or other volatile solvents working well in vacuum
chamber or might've been pressuriz
ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Tue, Jun 18, 2024 at 2:05 AM wrote:
Yea I said he had a couple of other good ones too
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: T
Hey there everyone.
I Just found another video by the same guy.
https://www.youtube.com/watch?v=3IoHu96BD18
I think this one is also pretty neat.
C.A.G.
On Monday, June 17, 2024 at 11:07:35 PM EDT, Tim Ziegler
wrote:
Great stuff Bill and thanks for sharing will watch that tomorrow fo
Hello Bill.
Now that's a nice video ( I truly enjoyed watching it.)
You are right the Router Crafter and the Legacy are distance cozens to each
other. They were made to do the same types of work. (differently) I did not see
anything in this video that could not be made with the Legacy. As I sai
Lucky guy! you get to celebrate twice ! ;-)
Have a great day! Bill.
C.A.G.
On Sunday, June 16, 2024 at 05:47:43 PM EDT, wrote:
Not for me our father’s day is first Sunday in September
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monda
Thank you Tim.
And I Hope, You have a GREAT Day as well. ;-)
C.A.G.
On Sunday, June 16, 2024 at 10:38:38 AM EDT, Tim Ziegler
wrote:
Happy Father's Day to all you fathers our there. Blessings on your day.
With Prayers,
Tim J Ziegler Ziegler Laser Worx LLC Ziegler WoodWork and Specialty
Welcome back Cole!
I am glad to here you are still around. Although I am sorry to hear about your
Cancer.I too, will be Praying for you.
take care.
C.A.G.
On Wednesday, June 12, 2024 at 06:46:36 PM EDT, Tim Ziegler
wrote:
Oh hey Praying for fast recovery, and healing. Keep in touch.
On
to put it on?
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Mon, Jun 10, 2024 at 5:26 PM 'Curt George' via Legacy Ornamental Mills
wrote:
Hello everyone.
I found some time
That looks Nice!
I need to take a closer look into those.
Thank you Bill.
Great find.
C.A.G.
On Monday, June 10, 2024 at 07:28:28 PM EDT, bulke...@mmnet.com.au
wrote:
https://www.youtube.com/watch?v=eaCgoUQilVQ&t=4s&ab_channel=MICROJIG
I think this system might be really good for
Thank you Bill.
I agree, sometimes simple is the best. But sadly making something look simple,
isn't always easy. ;-)
C.A.G.
On Monday, June 10, 2024 at 07:18:30 PM EDT, wrote:
Very very nice curt I like it lots sometimes simpler looks better
Bill
From: 'Curt G
crews to adjust for
squaring up the carriage, but maybe I should just disassemble the carriage and
put it back together so I can understand what all those screws are doing.
Thanks again,
Mark
On Sun, Jun 9, 2024, 12:43 AM 'Curt George' via Legacy Ornamental Mills
wrote:
Hi guys!
Ma
Hi guys!
Mark what are you morticing? round or square stock? On a table or between
centers?
If you plan to do something between centers, I would suggest to lock the
tailstock end of your woodby using a wood or alum. bracket to lock the end of
your spindle in place so it will not move. I have f
Hey Tim.
As far as I know Nova only made two OT
videos.https://www.youtube.com/watch?v=e8mrP4KJIi0 #2
https://www.youtube.com/watch?v=_A61S0pg8qY #1
https://www.youtube.com/watch?v=3AHOfuIBP8I&t=56s Ja Ho.
https://www.youtube.com/watch?v=OljU1B_m_6w Erik Spatt made a nice video on the
same topi
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Jun 2, 2024 at 7:49 PM 'Curt George' via Legacy Ornamental Mills
wrote:
Yes I enjoy those too.
BUT
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, June 2, 2024 1:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: reeds and flutes
Very Nice!
Eye Candy for the Legacy user.
OUR way is better. (although that guy most likely has done far more f
Very Nice!Eye Candy for the Legacy user. OUR way is better. (although that guy
most likely has done far more flutes that the average LOM user.) He did make it
look easy. ;-)
C.A.G.On Saturday, June 1, 2024 at 09:47:55 PM EDT, bulke...@mmnet.com.au
wrote:
https://www.youtube.com/wat
Hey Guys!
The Motto of the Yankee Trader comes to mind. "Buyer Beware"
Again this sale might be on the UP & Up. but...? its starting to sound more
like something is WRONG."Something smells Fishy here".
I hope I'm wrong.
C.A.G.
On Saturday, June 1, 2024 at 07:06:38 AM EDT, Tim Ziegler
wrote
Hello Everyone.
What a bad photo!What I do see is, there is a ball bearing headstock and acme
screw supports.there is legs and adjustable bed, newer ladder steps in the
adjustment locks.there is a dust bag inside the rails.sellers
remarks...accessories include circular attachment already instal
Hello Everyone.
Bill I think the Legacy 1000ex is the same as the 1500 or the 1000 EXL the
only differences are the length of the rail and the angle pitch charts. At the
very least the 1000ex will get Chris in the ball park as for as understanding
how the Legacy works.Thank you.
C.A.G.
On
Hey Chris.
I sent a note out. If all goes well you should have your manual very soon.
C.A.G.
On Wednesday, May 29, 2024 at 11:49:08 PM EDT, Chris Liska
wrote:
I'm still just looking for a complete manual. someone said they were in the
archive, but i can't find that. i've also searche
Google no longer supports the groups. I do not often get messages form Google
telling me when someone NEW is trying to log in or ask to join the Group.I try
to go though the web page a few times a day.
For new members (those who have not been granted full access to the group) I
am sorry for the
May 27, 2024 at 9:48:43 PM UTC-4 Curt George wrote:
Bill .
Who makes that off-set chuck that you use in the video?
C.A.G.
On Monday, May 27, 2024 at 09:43:21 PM EDT, wrote:
Thanks Curt it was fun to do
Bill
From: 'Curt George' via Legacy Ornamental Mills
Bill .
Who makes that off-set chuck that you use in the video?
C.A.G.
On Monday, May 27, 2024 at 09:43:21 PM EDT, wrote:
Thanks Curt it was fun to do
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday, May 28, 2024 10:10 AM
To: legacy-orname
I am glad you re-posted this Bill.
I always liked the skill and craftsmanship you show in this video.Thank you.
C.A.G.
On Monday, May 27, 2024 at 07:24:22 PM EDT, bulke...@mmnet.com.au
wrote:
https://www.youtube.com/watch?v=ZeUVSzVQqus&ab_channel=aussiman77181
this came up in an
Here is another step down Memory
lane.http://benchmark.20m.com/reviews/LegacyMill/toolslegacymill.html
C.A.G.On Sunday, May 26, 2024 at 09:52:32 AM EDT, 'Curt George' via Legacy
Ornamental Mills wrote:
This is form 2010.
https://discover.hubpages.com/games-hobbies/10-Good-
This is form 2010.
https://discover.hubpages.com/games-hobbies/10-Good-Reasons-to-Buy-a-Legacy-Ornamental-Mill
I like it, I hope you all do to. ;-)
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this grou
Hello Again Chris. (Im off from work early today.)
Legacy use to say for there logo.
"Legacy where the only Limitation is your Imagination"
Mike Pung put out a few video's on different methods to get the most
out of your Legacy. (A few years back.) that are both very good.
https://www.youtub
Hello Chris.I would like to help you, sadly the manual you refer to is not in
your e-mail to the group.Could you send us a photo of your machine. Legacy
over the years made a number of different modals. the 1000/ Alum. rail was made
with 3 different length of rail, but the basic machine is the
On 5/19/2024 7:18 PM, 'Curt George' via Legacy Ornamental Mills wrote:
Hello Everyone.
Just got done playing around with my newest toy for my Legacy.
The Magnetic base was a lucky find last week. (I got it cheap!) I used two
pieces of 3/4" plywood, cut them so they f
Wow that's Nice! Thank you Dan.
C.A.G.
On Sunday, May 19, 2024 at 06:37:18 PM EDT, cdkr...@gmail.com
wrote:
The attached is the latest iteration of Legacy Charts all on one spreadsheet
workbook. The latest is rotary table indexing as posted above. The sheet
should be self explanato
All the steps are the same as anyone in the group could do on any Manual Legacy
LOM's.Fun to watch. https://www.youtube.com/watch?v=cIt0jTPf50c
Have a good day.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe fr
Hello Again everyone!
I have posted these video's ,Mike posted some years back.on his methods of
indexing, These methods have always worked for me in the past. and I hope some
of you will learn and try his methods as well.
https://www.youtube.com/watch?v=oHgzEKnON-o&t=17s Crank handle indexing.
me of them. Those were the days
Mike OK
On 5/15/2024 12:12 AM, 'Curt George' via Legacy Ornamental Mills wrote:
https://www.youtube.com/watch?v=ooqZZkCp7tI&t=311s
I just saw this again. 7yrs old now. but still a lot of fun to watch. Thanks
Mike. ;-)
C.A.G. --
You recei
https://www.youtube.com/watch?v=ooqZZkCp7tI&t=311s
I just saw this again. 7yrs old now. but still a lot of fun to watch.Thanks
Mike. ;-)
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop r
1 - 100 of 1279 matches
Mail list logo
