Re: NEW VIDEO on YOUTUBE

Curt, clearance is about 24". I am thinking LED and maybe a couple of snake lights. thanks for the ideas. Mac, the dust hood is going to be a big add-on. I'm thinking a short curtain on rails to help direct dust up the fan opening. i got to thinking this featured full shelf would work well a

Re: NEW VIDEO on YOUTUBE

again.Mac-Original Message- From: russ veinot Sent: Nov 29, 2017 5:03 PM To: Legacy Ornamental Mills Subject: NEW VIDEO on YOUTUBE Part 4 of the legacy workstation is out..  stopped to show the features of the dedicated shop vac & blower system AND the Dust Hood Fan is working.  it'

Re: NEW VIDEO on YOUTUBE

Nice job Russwhat kind of over-head clearance do you have, between your work station and the top of the Legacy?If I were your I would think of adding LED lights and skip the reflective foil. Keep up the good work.And Thank you for posting AND  sharing your ideas ...  ;-) C.A.G. On Wednesday

NEW VIDEO on YOUTUBE

> > Part 4 of the legacy workstation is out.. stopped to show the features of > the dedicated shop vac & blower system AND the Dust Hood Fan is working. > it's working like a total workstation already. > > watch it at: https://www.youtube.com/watch?v=AnRvDnwPbaI > > > thanks for the interest

New Video on Youtube

part 3 of the legacy workstation is out.. stopped to show the features of the dedicated shop vac & blower system. it's starting to feel like a workstation already. watch it at: https://www.youtube.com/watch?v=mdU5yqVrVCI thanks for the interest, all comments welcomed. russ -- You receive

Re: New video on youtube

-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube  Thank you Russ.I did miss those two videos. I like the dust separator/ baffles  you made.But , I was asking more on the Legacy,then how you wil

RE: New video on youtube

ng :>) Let me know if this doesn’t answer your question Russ From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube

Re: New video on youtube

) .  I’m sure there will be more questions as this project goes forward. Thanks for asking,Russ  From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 6:12 PM To: legacy-ornamental-mills@googlegroups.com Subject:

RE: New video on youtube

roups.com] Sent: Friday, November 10, 2017 6:12 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube Nice job on the Video Russ. Two questions on this topic. Noise. and containment. (chips) Im not asking you to spoil your up and coming videos by spilling the beans, but

Re: New video on youtube

Nice job on the Video Russ.Two questions on this topic. Noise. and containment. (chips)Im not asking you to spoil your up and coming videos by spilling the beans, but those are the two big problems that I have with shop vac.'s... C.A.G. On Friday, November 10, 2017 4:55 PM, Russ Veinot wr

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=Ii6Mj_RQaXw It’s about time I turned my LOM from just a mill to a full blown workstation. This is part 1 about design and breakdown of all the components to the workstation. More videos to come.

Re: New video on youtube

Nice job -Original Message- From: Russ Veinot To: legacy-ornamental-mills Sent: Tue, Nov 7, 2017 3:21 pm Subject: New video on youtube !!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I

RE: New video on youtube

Thanks Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, November 07, 2017 3:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Real nice russ explains it all, I

Re: New video on youtube

Great video with several tips. Thx On Tue, Nov 7, 2017 at 2:21 PM, Russ Veinot wrote: > !!!*** NEW VIDEO ***!!! > > > > > > My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY > > > > It’s about DIY faceplates for the LOM. I show how easy to make and what > to watch out f

RE: New video on youtube

-ornamental-mills@googlegroups.com Subject: New video on youtube !!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I show how easy to make and what to watch out for. There is special attention to

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I show how easy to make and what to watch out for. There is special attention to custom faceplates and tips for the LOM. Russ -- You received

New video on youtube

!!!*** NEW VIDEO ***!!! Part 5 of the “New Milling Table is on my youtube channel at https://www.youtube.com/watch?v=R9fIvlR1IDk Legacy Building, part 5 of my milling table for my Legacy Mill. See how to make the off-set dog hole pattern on the milling table top and how to us

New video on youtube

!!!*** NEW VIDEO ***!!! Part 4 of the “New Milling Table is on my youtube channel at https://www.youtube.com/watch?v=wI4zbEXnpEs This video is about designing and making the milling table top. in this video I explain what is off-set dog holes and how to use this feature as well as

New video on youtube

!!!*** ANOTHER NEW VIDEO ***!!! There is a new video on my youtube channel at https://www.youtube.com/watch?v=UI7yEniGTws it’s a follow-up of my how to build the milling table I showed last video. There were some questions that came up. This is the follow-up to those questions. --

RE: New video on youtube

@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, October 22, 2017 8:06 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Nice video Russ and thank you for the plug for our group I hope it encourages others to post. Can you tell me about drilling the

RE: New video on youtube

-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Monday, 23 October 2017 9:37 AM To: legacy-ornamental-mills@googlegroups.com Subject: New video on youtube !!!*** NEW VIDEO ***!!! There is a new video on my youtube channel at https://youtu.be/LWpnuAjKJoU it’s about how to build

New video on youtube

!!!*** NEW VIDEO ***!!! There is a new video on my youtube channel at https://youtu.be/LWpnuAjKJoU it’s about how to build the milling table I showed yesterday. Thanks to all for the encouragement to do this. -- You received this message because you are subscribed to the Google Groups "Le

RE: New video on youtube

Thanks Bill, I’ll see what I do. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, October 21, 2017 3:59 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Very very

RE: New video on youtube

-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Sunday, 22 October 2017 5:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Hello everyone, I just made a new LOM video, can be seen at https

RE: New video on youtube

Hello everyone, I just made a new LOM video, can be seen at https://www.youtube.com/watch?v=fv2fESChgBQ if interested. It’s all about my new milling table that can hold any sized piece in any position for milling and batch milling. set up is done in less than 2 minutes and changing part out in

New video on youtube

I just made another video on youtube, https://www.youtube.com/watch?v=cJ-LjFNZbVI It’s about my $200 workbench made from a $500 antique desk. It’s not a LOM video, but might be of interest to any workshop enthusiast. All comments are welcomed. -- You received this message because you are

RE: new video on youtube, dust collection

-ornamental-mills@googlegroups.com Subject: RE: new video on youtube, dust collection Nice but how do you see what’s going on when milling Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 1

RE: new video on youtube, dust collection

namental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Monday, July 31, 2017 5:58 PM To: legacy-ornamental-mills@googlegroups.com Subject: new video on youtube, dust collection I just publish another video about dust collection improvements on my 1200 if interested https://www.youtube.com/watch

Re: new video on youtube, dust collection

Nice ! -Original Message- From: Russ Veinot To: legacy-ornamental-mills Sent: Mon, Jul 31, 2017 8:20 pm Subject: RE: new video on youtube, dust collection Sorry, I gave the wrong link to the legacy video. The right one is https://www.youtube.com/watch?v=cvtOb84CmRw&t

RE: new video on youtube, dust collection

Behalf Of Russ Veinot Sent: Monday, July 31, 2017 5:58 PM To: legacy-ornamental-mills@googlegroups.com Subject: new video on youtube, dust collection I just publish another video about dust collection improvements on my 1200 if interested https://www.youtube.com/watch?v=ogy_c94Yt3o <https:

new video on youtube, dust collection

I just publish another video about dust collection improvements on my 1200 if interested https://www.youtube.com/watch?v=ogy_c94Yt3o &t=192s Comments are always welcome :>) -- You received this message because you are subscribed to the