Re: Make a "Split Nut" - & buying parts from Legacy

Sorry this all stemmed from a harmless question from a new LOM owner, and a misunderstanding, of what parts were available. As for the split nut someone asked about those too and I just did some digging. My apologies. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave.

Re: Make a "Split Nut" - & buying parts from Legacy

Regarding the history of the lom rails, thanks for saving me the time of typing it out.  You are right on. Tim On Feb 5, 2019, 7:59 AM, at 7:59 AM, 'joe biunno' via Legacy Ornamental Mills wrote: >hers's what I remember from my inquiries regarding the Legacy rail... >it >is/was proprietary,

Re: Make a "Split Nut" - & buying parts from Legacy

most of The Group members have never seen a LOM come out of its box - NEW! Mac -Original Message- From: Ryan Jurgens Sent: Feb 5, 2019 12:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" - & buying parts from Legacy Lol. No, not really. Would

Re: Make a "Split Nut" - & buying parts from Legacy

ll together!  Send us pictures of The Event.  Like Bill said - most of The Group members have never seen a LOM come out of its box - NEW!Mac-Original Message- From: Ryan Jurgens Sent: Feb 5, 2019 12:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut

RE: Make a "Split Nut"

Carpenter Sent: Wednesday, 6 February 2019 4:22 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" Just the split nuts were different or the threaded rods size and count changed ? On Sat, Feb 2, 2019 at 2:22 PM Bill Bulkeley wrote: Fair enough Ti

Re: Make a "Split Nut" - & buying parts from Legacy

o: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" - & buying parts from Legacy Lol. No, not really. Would you believe my LOM is still in the original shipping boxes? Tess has asked to be a partner as I assemble it and begin using it.  I have a pretty nice wo

Re: Make a "Split Nut" - & buying parts from Legacy

sage- From: Ryan Jurgens Sent: Feb 5, 2019 12:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" - & buying parts from Legacy Lol. No, not really. Would you believe my LOM is still in the original shipping boxes? Tess has asked to be a partner as I

Re: Make a "Split Nut" - & buying parts from Legacy

Bet if she had her own LOM she would rather compete ! Shipping to you from US St. Louis, Mo. may require you to just share. Show us the results. On Tue, Feb 5, 2019 at 11:49 AM Ryan Jurgens wrote: > Lol. No, not really. Would you believe my LOM is still in the original > shipping boxes? Tess

Re: Make a "Split Nut" - & buying parts from Legacy

Lol. No, not really. Would you believe my LOM is still in the original shipping boxes? Tess has asked to be a partner as I assemble it and begin using it. I have a pretty nice wood shop in my basement and she has been watching me as I have built several things. On Tue, Feb 5, 2019, 11:43 AM 4

Re: Make a "Split Nut" - & buying parts from Legacy

Does that mean that your LOM play time is put off till you cut a couple trees down and build a new house ? On Tue, Feb 5, 2019 at 11:14 AM rtjurg...@gmail.com wrote: > I very much agree with all that. It seems with the uptick in the economy, > hobbyists are out playing again. There are those

Re: Make a "Split Nut"

ay, 3 February 2019 6:23 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Make a "Split Nut" > > > > Yes they are available from Legacy. I just ordered one from Cindy, and > will be here sometime this upcoming week. > > > > I responded the

Re: Make a "Split Nut" - & buying parts from Legacy

I very much agree with all that. It seems with the uptick in the economy, hobbyists are out playing again. There are those that play for fun and there are those that try to make a few bucks while playing.  So far I have not seen another machine quite like the LOM for such great and versatile

Re: Make a "Split Nut" - & buying parts from Legacy

hers's what I remember from my inquiries regarding the Legacy rail... it is/was proprietary, back in the day Legacy was making the manual machines... i.e. you could not buy it, even if you knew who the manufacturer was... Legacy eventually discontinued using that rail, and switched to a more

RE: Make a "Split Nut" - & buying parts from Legacy

parts for our "Legacy"(In this case meaning no longer in production.) Mills.   Thanks you Tim for your "Words of Wisdom".   Mac   -Original Message- From: Bill Bulkeley Sent: Feb 3, 2019 4:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Make

RE: Make a "Split Nut" - & buying parts from Legacy

: Wednesday, 6 February 2019 1:13 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" - & buying parts from Legacy Thanks Bill I am only going by what Cindy shared with me? Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialt

Re: Make a "Split Nut" - & buying parts from Legacy

e rail is different > > When looking make sure it’s the rail you want and not something just > similar. if it truly is the old legacy rail I’m sure many here would be > interested in where it can be purchased. > > > > Bill > > > > *From:* legacy-ornamental-mills@

RE: Make a "Split Nut" - & buying parts from Legacy

Subject: Re: Make a "Split Nut" - & buying parts from Legacy Good morning all, As promised Being fairly new on this I did a lot of digging as I did not want to jump in with out first knowing more about components, and their availability. Even when I went after the predecessor

Re: Make a "Split Nut" - & buying parts from Legacy

uction.) Mills. > > Thanks you Tim for your "Words of Wisdom". > > Mac > -- > -- > > -Original Message- > From: Bill Bulkeley > Sent: Feb 3, 2019 4:28 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Make a "

Re: Make a "Split Nut" - & buying parts from Legacy

e > interested in where it can be purchased. > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Ray Leaman > *Sent:* Tuesday, 5 February 2019 2:44 PM > *To:* legacy-ornamenta

RE: Make a "Split Nut" - & buying parts from Legacy

in where it can be purchased. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ray Leaman Sent: Tuesday, 5 February 2019 2:44 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" - & buy

Re: Make a "Split Nut" - & buying parts from Legacy

n.) Mills. > > Thanks you Tim for your "Words of Wisdom". > > Mac > -- > -- > > -Original Message- > From: Bill Bulkeley > Sent: Feb 3, 2019 4:28 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Make a "Split Nut&q

Re: Make a "Split Nut" - & buying parts from Legacy

Tim for your "Words of Wisdom". > > Mac > > -Original Message- > From: Bill Bulkeley > Sent: Feb 3, 2019 4:28 AM > To: legacy-ornamental-mills@googlegroups.com > Subject: RE: Make a "Split Nut" > > I agree Tim > Bill > > From: lega

Re: Make a "Split Nut" - & buying parts from Legacy

r LOMs - it increases the >>> likelihood that they will be willing to make parts for our "Legacy" (In >>> this case meaning no longer in production.) Mills. >>> >>> Thanks you Tim for your "Words of Wisdom". >>> >>> Mac >>> -- >>>

Re: Make a "Split Nut" - & buying parts from Legacy

ts for our "Legacy" (In this case > meaning no longer in production.) Mills. > > Thanks you Tim for your "Words of Wisdom". > > Mac > -- > ---------- > > -Original Message- > From: Bill Bulkeley > Sent: Feb 3, 2019 4:28 AM > To: legacy-ornamental-mil

Re: Make a "Split Nut" - & buying parts from Legacy

;> >> Mac >> -- >> ------ >> >> -Original Message- >> From: Bill Bulkeley >> Sent: Feb 3, 2019 4:28 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: RE: Make a "Split N

Re: Make a "Split Nut" - & buying parts from Legacy

ling to make parts for our "Legacy" (In this case meaning no longer in production.) Mills. Thanks you Tim for your "Words of Wisdom". Mac -Original Message- From: Bill Bulkeley Sent: Feb 3, 2019 4:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Make a &

Re: Make a "Split Nut" - & buying parts from Legacy

t; > Thanks you Tim for your "Words of Wisdom". > > Mac > -- > -- > > -Original Message- > From: Bill Bulkeley > Sent: Feb 3, 2019 4:28 AM > To: legacy-ornamental-mills@googlegroups.com > S

RE: Make a "Split Nut" - & buying parts from Legacy

our "Words of Wisdom".Mac-Original Message- From: Bill Bulkeley Sent: Feb 3, 2019 4:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Make a "Split Nut" I agree Tim Bill   From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-orn

RE: Make a "Split Nut"

I agree Tim Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Sunday, 3 February 2019 8:01 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" Joe in NY made a batc

Re: Make a "Split Nut"

; >Mac >_ > >-Original Message- >From: Tim Ziegler >Sent: Feb 2, 2019 8:05 AM >To: Legacy Ornamental Mills >Subject: Re: Make a "Split Nut" > >I have a buddy up here in Minnesota that has a CNC and I shot him an >email

RE: Make a "Split Nut"

s that may not know - can you tell us (your best guess) the various shape & sizes of Split Nuts that were shipped on the various LOMs?Thank you.Mac-Original Message- From: Bill Bulkeley Sent: Feb 2, 2019 3:21 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Mak

Re: Make a "Split Nut"

Since you found it, couldn't it be re-hardened? My tap has not been hardened,beyond its acme screw temper  but it can cut delrin easily enough,and I even did bronze once. I think that the new Legacy slip nut, will work given some time, and use. (If not I am willing to try chasing it with my

RE: Make a "Split Nut"

-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" Hello Everyone. (Its been a crazy week for me. Sorry to be a late comer to this topic.) I made my own tap a while back. I used a small section of lead-screw form an old Legacy. my tap works well. (If you want I can tr

Re: Make a "Split Nut"

Hello Everyone. (Its been a crazy week for me. Sorry to be a late comer to this topic.)  I made my own tap a while back. I used a small section of lead-screw form an old Legacy. my tap works well. (If you want I can try to chase the threads out? if so let me know, I am willing to try.) 5/8"-4

RE: Make a "Split Nut"

@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler Sent: Sunday, 3 February 2019 6:23 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Make a "Split Nut" Yes they are available from Legacy. I just ordered one from Cindy, and will be her

Re: Make a "Split Nut"

peaking from my years in the metal industry as a machinist and as a owner > of legacy mills > > Bill > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler > *Sent:* Sund

Re: Make a "Split Nut"

--- > > -Original Message- > From: Tim Ziegler > Sent: Feb 2, 2019 8:05 AM > To: Legacy Ornamental Mills > Subject: Re: Make a "Split Nut" > > I have a buddy up here in Minnesota that has a CNC and I shot him an email > to see if this something

RE: Make a "Split Nut"

February 2019 12:06 AM To: Legacy Ornamental Mills Subject: Re: Make a "Split Nut" I have a buddy up here in Minnesota that has a CNC and I shot him an email to see if this something he can create. Hopefully I hear something back from him this morning. kind regards,

Re: Make a "Split Nut"

Thank you, Tim.Mac-Original Message- From: Tim Ziegler Sent: Feb 2, 2019 8:05 AM To: Legacy Ornamental Mills Subject: Re: Make a "Split Nut" I have a buddy up here in Minnesota that has a CNC and I shot him an email to see if this something he can create. Hopefully I hear some

Re: Make a "Split Nut"

I have a buddy up here in Minnesota that has a CNC and I shot him an email to see if this something he can create. Hopefully I hear something back from him this morning. kind regards, Tim of ZWW On Thursday, August 3, 2017 at 11:23:26 AM UTC-5, Va Oak wrote: > > Hello all, > I am not sure

Re: Make a "Split Nut"

Has anybody created a file for a CNC for creating the split nuts? It seems like it could be done quite easily on one. Jeff Wimer -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving

Re: Make a "Split Nut"

rnamental-mills@googlegroups.com> Sent: Fri, Aug 4, 2017 9:26 pm Subject: Re: Make a "Split Nut" I have not tried what they did in this video although someday I hope to try it. https://www.youtube.com/watch?v=EVW7Q469RnA On Fri, Aug 4, 2017 at 9:46 AM, Tim Krause <artmarb...@c

RE: Make a "Split Nut"

ugh my house fire > but I don’t mind it will still cut nice soft delrin ok > > > >Bill > >-Original Message- >From: 'joe biunno' via Legacy Ornamental Mills >[mailto:legacy-ornamental-mills@googlegroups.com] >Sent: Friday, 4 August 2017 12:28 PM >To: Legacy Orn

RE: Make a "Split Nut"

Curt made a tap from some leftover acme and it works good. ⁣ On Aug 3, 2017, 7:27 PM, at 7:27 PM, 'joe biunno' via Legacy Ornamental Mills wrote: >There might be a chance that a brass split nut wears and compromises >the lead screw... then you have a

RE: Make a "Split Nut"

-ornamental-mills@googlegroups.com] Sent: Friday, 4 August 2017 12:28 PM To: Legacy Ornamental Mills Subject: RE: Make a "Split Nut" There might be a chance that a brass split nut wears and compromises the lead screw... then you have a bigger problem... I have sent several emails to

Re: Make a "Split Nut"

ld try that if it was me > > > > Bill > > > > *From:* legacy-orna...@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *Tim > Krause > *Sent:* Friday, 4 August 2017 4:37 AM > *To:* Legacy Ornamental Mills > *Subject:* Re:

RE: Make a "Split Nut"

There might be a chance that a brass split nut wears and compromises the lead screw... then you have a bigger problem... I have sent several emails to suppliers of tooling for the metal industry, and all have said no to a 5/8-4, right hand, acme thread tap... for now I am giving up and will try

Re: Make a "Split Nut"

Could the printer work with delrin or teflon? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.

Re: Make a "Split Nut"

If you have a 3D printer you actually print a splint nut. Stan Shuford s...@shuford.com On Thu, Aug 3, 2017 at 2:37 PM, Tim Krause wrote: > HDPE is a little soft. Over on another machinist form that I'm on people > have heated a lead screw and pressed acetal (delrin)

Re: Make a "Split Nut"

HDPE is a little soft.  Over on another machinist form that I'm on people have heated a lead screw and pressed acetal  (delrin) around the screw to form threads.  It takes multiple heating attempts and practice. ⁣Sent from BlueMail ​ On Aug 3, 2017, 9:23 AM, at 9:23 AM, MWF