Re: NEW VIDEO on YOUTUBE

Curt, clearance is about 24". I am thinking LED and maybe a couple of snake lights. thanks for the ideas. Mac, the dust hood is going to be a big add-on. I'm thinking a short curtain on rails to help direct dust up the fan opening. i got to thinking this featured full shelf would work well a

Re: NEW VIDEO on YOUTUBE

Russ,Thanks for making and sharing these videos.You hit upon one of THE MOST IMPORTANT aspects of woodworking; Dust control / filtering the air.It is quite possibly the MOST UNDERRATED hazard we have in our shops/work area.  Unless you want to die prematurely or at the least suffer respiratory issu

Re: NEW VIDEO on YOUTUBE

Nice job Russwhat kind of over-head clearance do you have, between your work station and the top of the Legacy?If I were your I would think of adding LED lights and skip the reflective foil. Keep up the good work.And Thank you for posting AND  sharing your ideas ...  ;-) C.A.G. On Wednesday

Re: New video on youtube

-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube  Thank you Russ.I did miss those two videos. I like the dust separator/ baffles  you made.But , I was asking more on the Legacy,then how you wil

RE: New video on youtube

ng :>) Let me know if this doesn’t answer your question Russ From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 7:32 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube

Re: New video on youtube

) .  I’m sure there will be more questions as this project goes forward. Thanks for asking,Russ  From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Friday, November 10, 2017 6:12 PM To: legacy-ornamental-mills@googlegroups.com Subject:

RE: New video on youtube

roups.com] Sent: Friday, November 10, 2017 6:12 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New video on youtube Nice job on the Video Russ. Two questions on this topic. Noise. and containment. (chips) Im not asking you to spoil your up and coming videos by spilling the beans, but

Re: New video on youtube

Nice job on the Video Russ.Two questions on this topic. Noise. and containment. (chips)Im not asking you to spoil your up and coming videos by spilling the beans, but those are the two big problems that I have with shop vac.'s... C.A.G. On Friday, November 10, 2017 4:55 PM, Russ Veinot wr

Re: New video on youtube

Nice job -Original Message- From: Russ Veinot To: legacy-ornamental-mills Sent: Tue, Nov 7, 2017 3:21 pm Subject: New video on youtube !!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I sh

RE: New video on youtube

Thanks Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, November 07, 2017 3:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Real nice russ explains it all, I

Re: New video on youtube

Great video with several tips. Thx On Tue, Nov 7, 2017 at 2:21 PM, Russ Veinot wrote: > !!!*** NEW VIDEO ***!!! > > > > > > My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY > > > > It’s about DIY faceplates for the LOM. I show how easy to make and what > to watch out f

RE: New video on youtube

Real nice russ explains it all, I look forward to the rotary table video especially centring it so it runs true Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Wednesday, 8 November 2017 7:21 AM To: legacy-

RE: New video on youtube

@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Sunday, October 22, 2017 8:06 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Nice video Russ and thank you for the plug for our group I hope it encourages others to post. Can you tell me about drilling the

RE: New video on youtube

Nice video Russ and thank you for the plug for our group I hope it encourages others to post. Can you tell me about drilling the dowel holes getting it so the dowel such a nice fit and also the thread nut you didn’t mention the making of them. Just a couple of points to help others who wish to

RE: New video on youtube

Thanks Bill, I’ll see what I do. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Saturday, October 21, 2017 3:59 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Very very

RE: New video on youtube

-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Sunday, 22 October 2017 5:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Hello everyone, I just made a new LOM video, can be seen at https

RE: New video on youtube

Hello everyone, I just made a new LOM video, can be seen at https://www.youtube.com/watch?v=fv2fESChgBQ if interested. It’s all about my new milling table that can hold any sized piece in any position for milling and batch milling. set up is done in less than 2 minutes and changing part out in

RE: new video on youtube, dust collection

-ornamental-mills@googlegroups.com Subject: RE: new video on youtube, dust collection Nice but how do you see what’s going on when milling Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 1

RE: new video on youtube, dust collection

Nice but how do you see what’s going on when milling Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 1 August 2017 10:20 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: new video

Re: new video on youtube, dust collection

Nice ! -Original Message- From: Russ Veinot To: legacy-ornamental-mills Sent: Mon, Jul 31, 2017 8:20 pm Subject: RE: new video on youtube, dust collection Sorry, I gave the wrong link to the legacy video. The right one is https://www.youtube.com/watch?v=cvtOb84CmRw&t

RE: new video on youtube, dust collection

Sorry, I gave the wrong link to the legacy video. The right one is https://www.youtube.com/watch?v=cvtOb84CmRw &t=12s From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veino