Nice Job Tim Jeff from Connecticut Sent from my iPhoneOn Jun 17, 2023, at 2:25 PM, Tim Ziegler wrote:Hey Curt, you'd asked about the Router I was using on my REVO, here it is, Mac, and any exotic wood guru, I also attached a few pic's of the wood species I used. in the raw so one can get a
Nice!
Thank you.
C.A.G.
On Saturday, June 17, 2023 at 02:25:55 PM EDT, Tim Ziegler
wrote:
Hey Curt, you'd asked about the Router I was using on my REVO, here it is,
Mac, and any exotic wood guru, I also attached a few pic's of the wood species
I used. in the raw so one can get a
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Friday, June 16, 2023 12:54 PM
> *To:* LOM Group ; Tim Ziegler <
> timjzieg...@gmail.com>
> *Subject:* Re: S
thanks Curt.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, Jun 15, 2023 at 11:06 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hey there Tim
>
>
Another question I’m not sure if it was asked how many flutes? and what dia was
the blank?
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Friday, June 16, 2023 12:54 PM
To: LOM Group ; Tim Ziegler
Subject: Re: Shoe Horn Handle on the REVO
So I
Hey there Tim
Thanks for the note on the router bits. choosing the right bit profile and the
pitch all really matter when working with small spindles. using the wrong bit
and or pitch will throw off the look of any job.I still say, you Hit a home run
on this project. Good for you!
Have a good
So I was asked today what bits I used on my shoe horn handle so I have
attached the two I used to do the
rope, and the flutes.
Magnate still makes these bits if anyone is interested.
I am still contemplating the species of wood, though Mac has been a great
help, I did not buy
much exotic wood
d-database.com/african-padauk/
>
> https://www.wood-database.com/peruvian-walnut/
>
>
>
> here you go Tim
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>
a - AKA "Brazilian Cherry"
>
>
>
> Check it out.
>
> Mac
> --
> --
>
> -Original Message-
> From:
> Sent: Jun 13, 2023 2:23 PM
> To:
> Subject: Re: Shoe Horn Handle on the REVO
>
&g
go back to handing crank
> again
>
>
>
> Bill
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:36 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Sh
motor on my revo
> for years now
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subjec
t;
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, June 14, 2023 2:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Wednesday, June 14, 2023 12:43 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Han
wrote:
>
> Yes, Tim. Nicely done!
> DanK
>
> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
> Me too
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com *On
> Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023
"Brazilian Cherry"
Check it out.
Mac
-Original Message-
From:
Sent: Jun 13, 2023 2:23 PM
To:
Subject: Re: Shoe Horn Handle on the REVO
Well of them 3 it really looks like this. I just have to remember if I would
have done a job with that species.
Kind Regards, Timot
Tim,
One more possibility (probability):
Jatoba - AKA "Brazilian Cherry"
Check it out.
Mac
-Original Message-
From:
Sent: Jun 13, 2023 2:23 PM
To:
Subject: Re: Shoe Horn Handle on the REVO
Well of them 3 it really looks like this. I just have to remember if I would
have
Totally, once you go drive motors you will never go back to handing crank again
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, June 14, 2023 2:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
Thanks Bill
: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, June 14, 2023 2:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
Drive motor? You mean someone finally listened to me? ;-P
Keep up the good work, Tim.
I cant wait to see more of your work
I listen to you curt I have a drive motor and a spindle motor on my revo for
years now
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Wednesday, June 14, 2023 2:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
Drive motor? You
Like I always say great mill the revo
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Wednesday, June 14, 2023 12:43 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
Thanks Mike, it was a lot of fun to do
Re: Shoe Horn Handle on the REVO
thanks Bill,
yeah wasn't much for mod's used on it. I sure like how it came out.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, Jun 13, 2023
:
>>
>>> Yes, Tim. Nicely done!
>>> DanK
>>>
>>> On Tuesday, June 13, 2023 at 7:15:11 AM UTC-4 bulk...@mmnet.com.au
>>> wrote:
>>>
>>>> Me too
>>>>
>>>>
>>>>
>>>> Bill
>>>&g
.au wrote:
>>
>>> Me too
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-orna...@googlegroups.com
>>> *On Behalf Of *Tim Ziegler
>>> *Sent:* Tuesday, June 13, 2023 8:53 PM
>&g
11 AM UTC-4 bulk...@mmnet.com.au wrote:
>
>> Me too
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, June 13, 2023 8:53 PM
>> *To:* legacy-orna...@googlegr
com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:53 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on i
ls@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, June 13, 2023 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mac,
>
>
>
> I am actually still trying to decide what species
; *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> Thanks Mac,
>
>
>
> I am actually still trying to decide what species it is. I don't recall
> any of those species you mentioned.
>
> But I will be looking
To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Shoe Horn Handle on the REVO
>
>
>
> thanks Bill,
>
> yeah wasn't much for mod's used on it. I sure like how it came out.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Spe
Me too
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 8:53 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
thanks Bill,
yeah wasn't much for mod's used on it. I sure like how
@googlegroups.com
Subject: Re: Shoe Horn Handle on the REVO
Thanks Mac,
I am actually still trying to decide what species it is. I don't recall any of
those species you mentioned.
But I will be looking it up. Just happened to be the exact size I was looking
for and was a very dense
thanks Bill,
yeah wasn't much for mod's used on it. I sure like how it came out.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Tue, Jun 13, 2023 at 12:41 AM wrote:
> Very nice Tim totally proves simple
Thanks Mac,
I am actually still trying to decide what species it is. I don't recall any
of those species you mentioned.
But I will be looking it up. Just happened to be the exact size I was
looking for and was a very dense and
hard wood that seemed it would take the everyday use of a shoe horn.
Very nice Tim totally proves simple looks great.
Done with your new fine pitch gears no doubt
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, June 13, 2023 12:41 PM
To: LOM Group ; Tim Ziegler
Subject: Shoe Horn Handle on the REVO
Good
Tim,
Very nice - thanks for sharing.
The pics are low res. - so a bit difficult deciding the wood type. But a
couple guesses are:
Peruvian Walnut?
Paduk?
Cumaru?
Cheers!
Mac
-Original Message-
From:
Sent: Jun 12, 2023 10:41 PM
To: LOM Group , Tim Ziegler
Subject: Shoe Horn Handle on
Thanks Curt.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Jun 12, 2023 at 9:51 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Tim
> That Elegant,
TimThat Elegant, Nicely Done!I cant wait to find out more. I like how the
flutes and rope flows together in one handle. A+ in my book.Thank you.
C.A.G.
On Monday, June 12, 2023 at 10:41:17 PM EDT, Tim Ziegler
wrote:
Good evening,
Well I thought it was time to turn something of use
36 matches
Mail list logo