Great job Mike, works just like it ought.DensonSent from Denson's iPhoneOn Feb 16, 2023, at 9:51 PM, Tim Ziegler wrote:Good deal, with a pc of stock that long you may want the second one in there too. Then also lighter cuts and you will have it made.Kind Regards,Timothy J. ZieglerZiegler WoodWork
Yes sir you are welcome.DensonSent from my iPadOn Feb 13, 2023, at 9:40 PM, Tim Ziegler wrote:Hey Denson thanks for jumping in on that. Great job.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Mon, Feb 13, 2023 at 5
Hey Denson thanks for jumping in on that. Great job.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Feb 13, 2023 at 5:49 PM 'Denson Ingram' via Legacy Ornamental Mills
wrote:
> Mike those pieces are
I would have it but not until tomorrow for sure.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Feb 13, 2023 at 5:20 PM Mike Newman wrote:
> Does anyone already have the dimension for the hdpe block
thanks for the info both dim/tailstock reference. Makes perfect sense on
using the tail stock as a reference to go with the overall dim provided by
Denson.
On Monday, February 13, 2023 at 6:30:36 PM UTC-6 Curt George wrote:
> Mike.
> A simple way to make your own steady rest is to make the cr
Mike.A simple way to make your own steady rest is to make the cross members
first. then USING those mounted to the Legacy's rails, you can make your
blocks, By using your tailstock as a reference point, mark the steady blocks so
the center point of the tail stock is the middle of the V/ center
Mike those pieces are 2 1/4” w x 1 1/4” L x 1 1/4” thickDensonSent from Denson's iPhoneOn Feb 13, 2023, at 5:20 PM, Mike Newman wrote:Does anyone already have the dimension for the hdpe blocks used on the factory thin stock support? I finally found a block of the material that I can make my own,
Does anyone already have the dimension for the hdpe blocks used on the
factory thin stock support? I finally found a block of the material that I
can make my own, but wanted to get the dimensions. Overall dimensions and
then size/position of the v-notch should be all I need. I will attach it
