ichard
> Ellis
> *Sent:* Tuesday, 21 November 2017 11:05 PM
> *To:* Legacy Ornamental Mills
> *Subject:* Re: new legacy drive hubs
>
>
>
> Thanks for that Bill
>
> Quite interesting, and then, when looking at the utubes that were showing
> down the side,
LiLtwisted,
sometimes threads are just something else that can go wrong :>)
so the lock collar holds even under high torque?
Russ
On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote:
> https://www.youtube.com/watch?v=W-X6miCWaPg=em-uploademail
>
>
>
> hopefully some of you
ect: Re: new legacy drive hubs
LiLtwisted,
your chuck drives off the morse taper? what type of headstock do you have.
you don't have a 1-8TPI shaft?
Bill,
well. . . i do hate typing:>)
Russ
On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote:
https://www.youtube.com/watch?v
LiLtwisted,
your chuck drives off the morse taper? what type of headstock do you
have. you don't have a 1-8TPI shaft?
Bill,
well. . . i do hate typing:>)
Russ
On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote:
> https://www.youtube.com/watch?v=W-X6miCWaPg=em-uploademail
>
>
Nice , Thanks for posting
Peter
-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
To: legacy-ornamental-mills <legacy-ornamental-mills@googlegroups.com>
Sent: Tue, Nov 21, 2017 5:24 pm
Subject: RE: new legacy drive hubs
I made a sphere or ball attachment f
@googlegroups.com] On Behalf Of Richard Ellis
Sent: Thursday, 23 November 2017 3:06 AM
To: Legacy Ornamental Mills
Subject: Re: new legacy drive hubs
Bill
Thanks for reminding me, I had seen your Ball Turner long before I got the
Revo. It looked a bit of a faff to do it, for the old Woodchuck. Time
eant to make one for the revo must do it one day
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-orna...@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of
> *Richard
> Ellis
> *Sent:* Tuesday, 21 November 2017 11:05 PM
Hello and Good morning MichaelYes the drive hubs are proprietary to Legacy, But
what I have found , these hubs are the best way to hold almost any idiom that I
want to turn, they are rock solid and smaller and cheaper then any other
holding system that I have found. Plus one MORE big reason why
] On Behalf Of Richard Ellis
Sent: Tuesday, 21 November 2017 11:05 PM
To: Legacy Ornamental Mills
Subject: Re: new legacy drive hubs
Thanks for that Bill
Quite interesting, and then, when looking at the utubes that were showing down
the side, there was one about turning spheres, also
.
Michael
From: 'Curt George' via Legacy Ornamental Mills
[mailto:legacy-ornamental-mills@googlegroups.com]
Sent: Tuesday, November 21, 2017 9:14 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: new legacy drive hubs
Michael
Nothing is wrong, but this design allows for exact
-mills@googlegroups.com]
Sent: Tuesday, November 21, 2017 12:51 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: new legacy drive hubs Now that's pretty NEAT! (ESP)
Efficient.,Simple & Practical. Nice going Legacy guys. ;-) C.A.G. On
Monday, November 20, 2017 3:58 PM, Bill Bulke
What’s wrong with just a simple 1 ‘x8 TPI face plate?
From: 'Curt George' via Legacy Ornamental Mills
[mailto:legacy-ornamental-mills@googlegroups.com]
Sent: Tuesday, November 21, 2017 12:51 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: new legacy drive hubs
Now that's
Now that's pretty NEAT! (ESP) Efficient.,Simple & Practical.
Nice going Legacy guys. ;-)
C.A.G.
On Monday, November 20, 2017 3:58 PM, Bill Bulkeley
wrote:
https://www.youtube.com/watch?v=W-X6miCWaPg=em-uploademail
hopefullysome of you will find this
Bill,Thanks for sharing. Very interesting. I may put a pair of those LowPro Clamps on my Christmas List.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Nov 20, 2017 3:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: new legacy drive hubs
14 matches
Mail list logo