I've been using Firefox for a long time, and have had
no problem with my GEDCOMs from Legacy.
Roxanne Baird
--- ronald ferguson <[EMAIL PROTECTED]> wrote:
> Thanks for that, Myrna, I don't often use Firefox
> but it's worth knowing the
> problem with Ancestry.
>
> Ron Ferguson
>
>
> >From: <[
My thanks to all for your help - problem fixed.
Martha
- Original Message -
From: "Cathy" <[EMAIL PROTECTED]>
To:
Sent: Sunday, February 18, 2007 10:43 PM
Subject: Re: [LegacyUG] Error 3021
Hi Martha,
You'll find the answer on
http://www.legacyfamilytree.com/Help.asp
Look for 3021
Yes, it's checked, Ron. I've gone over all the options, and
everything else I can think of and haven't gotten him to show unless
their child's generation is included.
Elaine
On 2/19/07, ronald ferguson <[EMAIL PROTECTED]> wrote:
Elaine,
Your last email rang bells. Have you checked "include
Elaine,
Your last email rang bells. Have you checked "include other spouses" in
Report Oprions?
Ron Ferguson
_
For Genealogy, Software and Social visit:
http://myweb.tiscali.co.uk/fergys/
*New Blog* - Improve Colour Photos
Nope, it's not. LOL He's not marked as private.
I did try adding another generation to the report. When I do that, the
second husband shows along with their child. The problem is that I
really don't want to have that generation included on the report.
Sherry is attempting to help me privately, s
Open up this second husband's individual screen. At the lower right
hand side, below the tags, is a box marked Private. Sometimes these
boxes get ticked accidently when someone is clicking from one Windows
application back to Legacy. It would be an easy fix if this were the
case, but it probably i
That's fascinating, Nick. So does mine. I have never added the cause of
death to any of my reports before so haven't seen it until you pointed it
out. At least it adds a degree of finality to it!
A very good reason for continuing my previous practice.
Ron Ferguson
__
Nick,
Was playing around some more - I think I can repeat your problem.
When the "Cause of Death" is at the very bottom of the page, a vertical
line does cut through the events/description heading for the following
page. Subsequent pages don't have the vertical line.
If the same situation i
it cut through the Event/Description/...heading.
Nick
--- Bob Janice <[EMAIL PROTECTED]> wrote:
> Just ran the Individual Report for both my mother
> and father (both have
> cause of death indicated in the medical notes).
> Both reports look fine
> - no bisecting line after the cause of death.
Just ran the Individual Report for both my mother and father (both have
cause of death indicated in the medical notes). Both reports look fine
- no bisecting line after the cause of death. I know this doesn't help
you but I figure the more information the better . . . .
Bob
Nicholas Cirill
If I have a cause of death stated in the medical notes
section, on the Individual report the line after the
Cause of Death has a line bisecting it. Any thoughts?
Nick Cirillo
Fairfax VA
Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features
not found in the Standard Editio
Elaine,
Please email me off list at [EMAIL PROTECTED] Attach the
Descend.usr file from the main Legacy folder to your message. I'll take a
look at the settings you're using.
Also let me know which build of Legacy you are using (go to Help > General
Information or, in Legacy v6 the Legacy Home t
Thanks Sherry,
I've done that and it has gotten rid of the errors. But I'm still
having the original issue with the descendant book.
Elaine
On 2/19/07, Sherry/Support <[EMAIL PROTECTED]> wrote:
Elaine,
I've had that error before and the only way I could fix it was by exporting
to a new Family
Pat,
I'm not sure why it would change overnight.
Are you able to click on the H:xxx box at the bottom right (next to
the time) and enter a RIN there after a pop-up comes up "Go To
Individual"? (That is how I quickly find someone whose RIN I have.)
Then going back to the Name List, just double c
Hi Susan,
Actually it's a second husband, and I can't even find how to make him
private. He's actually designated as the preferred spouse, as she had
no children with the first husband. I'm only doing the report as far
as her generation, so her son is not included. The report ends with
this gene
I'm in the process of setting up my Vista computer and Legacy installed with
no problems and runs just beautifully. I have yet to run across any
"titanic" problems other than the help file issue in Legacy (which is being
worked on by both MS and our programmers) and the learning curve because
ther
There are three other formats for help files that Vista supports - .chm,
html and xml. The program no longer supports the .hlp format. They didn't
overlook the need for Help files. Microsoft just considers the .hlp format
obsolete.
Thanks for using Legacy.
Sherry
Customer Support
Millennia Cor
Elaine, was the second wife somehow marked as a Private Person?
Susan
On 2/19/07, Elaine O'Neill <[EMAIL PROTECTED]> wrote:
Hi Ron,
I ran Check/Repair multiple times, shut down Legacy and
restarted.all with no change. I followed the link you sent, did
what it suggested and exported to a n
Elaine,
I've had that error before and the only way I could fix it was by exporting
to a new Family File. Go to our website at
http://www.LegacyFamilyTree.com/Help.asp > Solutions by Error Number, where
you'll find a solution to this error message.
Thanks for using Legacy.
Sherry
Customer Suppo
With Legacy closed, go to the Legacy folder on your hard drive. Delete all
files with the .usr extension. This will delete any preexisting user
settings. The files will be recreated automatically when you re-install
Legacy and you'll need to redo your settings. Next uninstall Legacy, restart
your
Hi Ron,
I ran Check/Repair multiple times, shut down Legacy and
restarted.all with no change. I followed the link you sent, did
what it suggested and exported to a new Legacy file. I no longer get
the error messages, but the Descendant book is still failing to show
both marriages for this p
Elaine,
As Mary suggested, run the Check/Repair again and if that doesn't work try
having a look at the error by number help page at:
http://www.LegacyFamilyTree.com/Help.asp (btw this address is at the bottom
of every email - more than once if people don't cut it off as they should!)
and the
Yep, ran it about 4 times. Have shut Legacy down, restarted and run
Check/Repair again. Still get the same results.
Thanks
Elaine
On 2/19/07, Mary Young <[EMAIL PROTECTED]> wrote:
Sometimes you need to run Check.n.Repair twice before an error clears.
(Though you've probably tried that alread
Sometimes you need to run Check.n.Repair twice before an error clears.
(Though you've probably tried that already!).
Cheers,
Mary Young
Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features
not found in the Standard Edition. Learn more about these features at
http://le
Hi Ron,
I checked the MRINS, the number for the first marriage is one digit
higher than for the second marriage.
I ran a file check/repair. I get an error stating a To Do item is not
found. I don't have any To Do Items set. When I click on the OK, I
then get an Error:3021 Item Missing message.
Hi Martha,
Try File>file Maintence.>Check/repair
Leo
From: "Martha Taylor" <[EMAIL PROTECTED]>
Reply-To: LegacyUserGroup@legacyfamilytree.com
To:
Subject: [LegacyUG] Error 3021
Date: Sun, 18 Feb 2007 22:29:42 -0500
When I try to enter a spouse and press button to add a new individual I get
t
Elaine,
Have you checked your MRINS to ensure there is not a ghost marriage? Also I
would try running a check/repair and then set relationships.
Ron Ferguson
_
For Genealogy, Software and Social visit:
http://myweb.tiscal
I am creating a descendant book to share with a fellow researcher.
When I preview it, I see that one person, who was married twice, shows
with only one spouse instead of both. I have checked all my settings
and for the life of me cannot see what I'm overlooking. There are
other people that were
Martha,
I had that problem for several months a long time back, but it seems to have
disappeared with the newest "up-date" Do you have the newest build date?
when the blank screen finally comes up i would just enter the info and go
on. sometimes it came up when adding a new Husband to the fi
Look in the Index View if User ID is shown. You can change this by
clicking the Options button (Index Tab) > Change Sort/Search to RIN
(or User ID).
Evert
2007/2/19, Pat Jones <[EMAIL PROTECTED]>:
I was able to search for an individual in the index view
yesterday by inserting the person's RIN
Pat,
A couple of suggestions to start with, Have you tried restarting Legacy? And
secondly try using File>File Maintenance>Check Repair.
Ron Ferguson
_
For Genealogy, Software and Social visit:
http://myweb.tiscali.co.uk/fe
I was able to search for an individual in the index view
yesterday by inserting the person's RIN number in that search box
without a problem. This morning I started to work on the
program, inserted the RIN for the first person I wanted to work
with but no number could be entered in that column
Well, Cathy, I DO have a lot of them. And I have been working thru
them as you said. Just thought I would try to find an easier solution.
I have the rest of my life to fix them up along with the locations,
etc. (smile) Thanks.
Elsie
- Original Message -
From: "Cathy" <[EMAIL PROTECT
33 matches
Mail list logo