Re: device-mapper: reload ioctl on failed

What version of the lvm RPM are you running? We have run into a problem on a CentOS 6 installation where LVM would not put online disks that were read only. The bug started at a version that I unfortunately forgot and was fixed in a newer version that I forgot as well. But I managed to find one

Re: device-mapper: reload ioctl on failed

On Thu, 13 Nov 2014 08:45:02 + "Pavelka, Tomas" wrote: > What version of the lvm RPM are you running? We have run into a or what version of RHEL6 are you installing? Looking into the history of the lvm2 package it might have been already fixed in one of the latest updates.

SLES11 SP3 v SP1

Hi all, Our Linux team has just upgraded some of our SLES11 SP1 systems (running under z/VM 6.2 on a zEC12) to SP3. The systems run Oracle and the Oracle test bods report that Oracle is now 10-20% slower. They identified Oracle SR 13074706 and applied it. Although that helped, they still think

RHEL7 systemd, howto add /usr/bin/iucvtty hvc1 -- /bin/login ??

Hi, have tried adding the very early start of at least one 'iucvtty hvc1' to begin with. It does start, but when I tried to login the login just ends without any messages or delays. I have added this little file: /etc/systemd/system/iucvtty.service(it is a modified copy of getty.service) #

Re: What are you using to patch RHEL guests under z/VM?

Hi, we have a local RedHat Satellite server, same RHEL Satellite server as x86 gang, we have s390x channels as well. Works fine. BR /Tore Agblad Volvo IT. -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Mike Shorkend Sent: den 5 november 2014 7:

Re: RHEL7 systemd, howto add /usr/bin/iucvtty hvc1 -- /bin/login ??

Hi Tore, On Thu, Nov 13, 2014 at 02:12:32PM +, Agblad Tore wrote: > Hi, have tried adding the very early start of at least one 'iucvtty hvc1' to > begin with. > It does start, but when I tried to login the login just ends without any > messages or delays. > I have added this little file: > >

Re: RHEL7 systemd, howto add /usr/bin/iucvtty hvc1 -- /bin/login ??

Thank's , but it is the same result here. I used I did a daemon-reload first, and also tried start without enable first, same result. These also have ? instead of pts/n in ps -ef|grep iucvtty output. Do I need more files than this service file ? BR /Tore Agblad -Original Message- From

Re: RHEL7 systemd, howto add /usr/bin/iucvtty hvc1 -- /bin/login ??

Got it now, if turning off selinux enforce mode it works. So now I miss selinux rules for this. The funny thing is that if I manually as root enter: /usr/bin/iucvtty hvc2 -- /bin/login I can login with selinux enforcing. /Tore -Original Message- From: Linux on 390 Port [mailto:LINUX-390

Re: device-mapper: reload ioctl on failed

Server trying to share and receiving errors: rpm -qa |grep lvm lvm2-libs-2.02.100-8.el6.s390x lvm2-2.02.100-8.el6.s390x Owning server: -bash-3.2$ cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.10 (Tikanga) -bash-3.2$ hostname wil-zwasmstrtst01.bbtnet.com -bash-3.2$ rpm -qa |gre

Re: device-mapper: reload ioctl on failed

> lvm2-2.02.100-8.el6.s390x When I was dealing with this I had a version that had the bug fixed and I think it was older than 2.02.100. It was 2.02.9x something. I would guess that your problem is LVM related but not the same that I had. Red Hat would give you better advice than I do. Tomas

Do you use the Linux Health Checker?

Do you use the Linux Health Checker? The Linux Health Checker has been available as a separate download via http://lnxhc.sf.net ... some installations use it, some don't, some may be unaware of it. Please take a couple minutes to complete a brief survey at http://ibm.biz/BdEPTq to help IBM underst

Re: device-mapper: reload ioctl on failed

On Thu, 13 Nov 2014 15:58:42 + "Pavelka, Tomas" wrote: > > lvm2-2.02.100-8.el6.s390x > > When I was dealing with this I had a version that had the bug fixed > and I think it was older than 2.02.100. It was 2.02.9x something. I > would guess that your problem is LVM related but not the same th

Mainframe Work, Then and Now

Mainframe Work, Then and Now -- The issues and transitions mainframers faced in the past help us improve today It's all too easy as mainframers to answer "What's new?" with "Not much." Or to gripe about the latest bug encountered or fixed, or look forward to installing the (supposedly) latest-

Looking for a site name that has the following code such as swapgen.exec

Hi, I am looking for the site that I can download such as callsm1.exec, cpformat.exec and ssicmd.exec to maint and profile.exec, rhel64.exec, sample.conf-rh6, sample.parm-rh6, sample.parm-s11, sles11s3.exec and swapgen.exec to lnxmaint. Please advise what the site name is. Thanks, Ray -

Re: Looking for a site name that has the following code such as swapgen.exec

Raymond, According to the VM Cookbook (I presume you got it from there), you may find all those files at: http://www.vm.ibm.com/devpages/mikemac/SG248147.tgz Hope that helps. -- Pedro Principeza Senior SW Support Engineer for Linux IBM Brazil From: "Chu, Raymond" To: LINUX-390@VM.MARI

Re: Looking for a site name that has the following code such as swapgen.exec

On Nov 13, 2014, at 12:30 PM, "Chu, Raymond" wrote: > Hi, > > I am looking for the site that I can download such as callsm1.exec, > cpformat.exec and ssicmd.exec to maint and profile.exec, rhel64.exec, > sample.conf-rh6, sample.parm-rh6, sample.parm-s11, sles11s3.exec and > swapgen.exec to l

Re: Do you use the Linux Health Checker?

Hi Bob, We checked this out long ago and haven't tried it since so I thought I would revisit. I think I found a bug. Server on a zEC12 with crypto accelerator zlinux-maint:~ # lszcrypt card2b: CEX4A Reports zlinux-maint:~ # lnxhc run crypto_opencryptoki_ckc -V Collecting system information

Re: device-mapper: reload ioctl on failed

Yes we have a case opened with redhat. I'll double check with our linux admins to see if they supplied that information to the vendor. Thanks Scott -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Pavelka, Tomas Sent: Thursday, November 13, 2014

Re: Do you use the Linux Health Checker?

One more thing, Checks fs_fstab_fsck_order and fs_usage both fail on a loopback filesystems Example from /etc/fstab for one of those: /apps/distro/sles11sp3/SLES-11-SP3-DVD-s390x-GM-DVD1.iso /apps/distro/sles11sp3/DVD1 iso9660 loop,ro 0 0 -Original Message- From: Cortes, Marcy D.

Re: Looking for a site name that has the following code such as swapgen.exec

Ray, The tar file for the latest Cookbook is: http://www.vm.ibm.com/devpages/mikemac/SG248147.tgz Here are the contents of the tar file: # *tar tzf SG248147.tgz* SG248147/ SG248147/rhel64/ SG248147/rhel64/clone-1.0-11.s390x.rpm SG248147/README.txt SG248147/vm/ SG248147/vm/maint/ SG248147/vm/m

Re: Looking for a site name that has the following code such as swapgen.exec

Are you guys coming out with a cookbook for sles 12 ? -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael MacIsaac Sent: Thursday, November 13, 2014 2:07 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Looking for a site name that has the following

Re: Looking for a site name that has the following code such as swapgen.exec

Alan, > Are you guys coming out with a cookbook for sles 12 ? I used to do "whitebooks" on the side when I got itchy and there was no funding for formal Redbooks. I can promise you that won't happen at my new job :)) When I was at the last SHARE, there were two distributors asking if there woul

Re: Looking for a site name that has the following code such as swapgen.exec

Thanks, Mike and I know you will respond. -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Michael MacIsaac Sent: Thursday, November 13, 2014 3:03 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Looking for a site name that has the following code such

Get stuck on configuring LNXADMIN from the Cookbook

Hi I am following the Cookbook to configure LNXADMIN for Linux administration Here is what I have in user direct c file ** * PROFILE LNXDFLT COMMAND SET VSWITCH VSW1 GRANT &USERID COMMAND DEFINE NIC 600 TYPE QDIO COMMAMD COUPLE 600 TO SYSTEM VSW1 CPU 00

Re: Get stuck on configuring LNXADMIN from the Cookbook

spell check : COMMAMD / INCLDUE On 11/13/14, Chu, Raymond wrote: > Hi > I am following the Cookbook to configure LNXADMIN for Linux administration > > Here is what I have in user direct c file > > ** > * > PROFILE LNXDFLT > COMMAND SET VSWITCH VSW1 GRANT &USERI

Re: Get stuck on configuring LNXADMIN from the Cookbook

There is a directory statement nicdef where you can specify the LAN it should be coupled. OPTION LNKNOPAS means that the guest can link any minidisk of other machines without specifying the respective password defined in the mdisk statement. It works only when RACF or other ESM not active. On 13

Re: Get stuck on configuring LNXADMIN from the Cookbook

Yep Thanks for the correction. I do need another pair of reading glasses -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of mstram . Sent: Thursday, November 13, 2014 3:50 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Get stuck on configuring LNXADMIN

Re: Get stuck on configuring LNXADMIN from the Cookbook

Thanks again, I really need a good pair of glasses. It was another typo. -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Florian Bilek Sent: Thursday, November 13, 2014 3:56 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Get stuck on configuring LNXA

Re: device-mapper: reload ioctl on failed

More errors: device-mapper: table: 253:18: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 253:19: linear: dm-linear: Device lookup failed device-mapper: ioctl: error adding target to table device-mapper: table: 253:1: linear: dm-lin