Hi,
I would like to config a certificate authority (CA) in my company
with RACF. Is it possible??? If it is possible, how can I do it??
Redbooks ???
thanks in advanced,
--
Antonio Pires
Suporte Tecnico - AGANP
Vic Cross wrote:
On Fri, 7 Nov 2003, Wolfe, Gordon W wrote:
Thanks, Alan. that settles it, I guess. PCICA cards it is.
In another item of documentation (the Linux Device Drivers manual, I
think), we read that if both PCICC and PCICA cards are present on an LPAR,
that Linux will only use the PC
Hi,
Why a VM set the OSA portname just in uppercase??? I wrote portname,
in tcpip profile, in lowercase, and when I tried to config a Linux in
this OSA I needed to put the portname, in chandev.conf file, in uppercase.
How can I solve it? I need to put the VM portname in lowercase.
[]' s,
--
Hi,
I would like to connect my Linux to my network using an IBM 2216 router.
IP/Ethernet---> 2216 <---IP/LCS/Escon---> linux on z800
How can I do it?
thanks in advanced,
--
Antonio Pires
Suporte Tecnico - AGANP
Nix, Robert P. wrote:
Did you define the new DASD to the CP Directory? (I'm assuming that you're doing this beneath VM...) Once defined, did you link them into the currently running virtual machine?
Robert P. Nixinternet: [EMAIL PROTECTED]
Mayo Clinic
Sergey Korzhevsky wrote:
echo "add device range=0bb2" >> /proc/dasd/devices
WBR, Sergey
"Anttnio Pires de Castro Jr." <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
03.11.2003 15:32
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Hi,
How can I change dinamically the /proc/dasd/devices to add a new
dasd without reboot my machine.
I tried the following command, but it didn't work
echo "0bb2(ECKD) at ( 94: 36) is dasdj : active at blocksize: 4096,
601020 blocks, 2347 MB" >> /proc/dasd/devices
thanks in advanced,
--
Hi,
I have set one of my systems profile exec to have set run on. When we close
our tn3270 session to VM, it seems that the system never goes down, but my ssh
session terminates and new sessions can not be established until I open a
3270 session to the system again.
What is happening? Can someone
I couldn't connect to this news. Is It working??
thanks,
Anttnio.
Jim Elliott wrote:
I tried to put IBM JVM 1.4.1 for 390x with my application server
(JBoss), but It is showing an error with my SSL (HTTPS). When I use
IBM JVM 1.3.1 for 390, SSL works well. I discover that I need an
"ibmjsse.jar" p
Hi,
I tried to put IBM JVM 1.4.1 for 390x with my application server (JBoss), but It is
showing an error with my SSL (HTTPS). When I use IBM JVM 1.3.1 for 390, SSL works well. I
discover that I need an "ibmjsse.jar" packet.
Where can I download ibmjsse.jar ?
thanks in advanced,
Ant
Are you using SuSE 8 in a zSeries ???
I have SuSE 8 config in 5 LPARs in a z800, and there are /etc/zipl.conf
Anttnio.
Ceruti, Gerard G wrote:
Hi Antonio
Hm there is no zipl.conf file in the /etc dir
Gerard
-Original Message-
From: "Anttnio Pires de Castro Jr." [mailto:[E
1 - Add a new disk in /etc/zipl.conf
...
parameters="dasd=0b0e,0b0f,0b10 root=/dev/dasda1"
...
new disc (dasdc)= 0b10
2 - Reboot your linux:
3 - Format disk:
dasdfmt -b 4096 -f /dev/dasdc
4 - Partitioning disk (create dasdc1):
fdasd /dev/dasdc
5 - Create a file system
mke2fs -b 4096 /dev/das
Hi,
I am trying to use an IBM JVM 1.4.1 64bits, but I am having problems with HTTPS. Actually we have JBoss 3.2.1 + IBM JVM 1.3.1 32 bits and SuSE 8, running ok. But, when we change de JVM to 1.4.1, JBoss+Jetty didn't startup the HTTPS listener, and show some erros.
Maybe this problem is b
I need an IBM's SDK JVM. I have a 1.3.1 and 1.4, I would like to have a 1.4.1.
thanks in advanced,
Anttnio.
Post, Mark K wrote:
Anttnio.
That depends on _who's_ JVM you want. IBM's? Blackdown? Kaffe?
Mark Post
-Original Message-
From: "Anttnio Pires de Castro Jr." [mailto:[EMAIL PROT
Hi,
I would like to known where can I find a new JVM. ??
thanks in advanced,
Anttnio.
No. Linux doesn't show nothing and in HMC, hardware messages, doesn't
show nothing too.
thanks,
--
Antonio Pires
Suporte Tecnico - AGANP
Rich Smrcina wrote:
I've seen a similar problem on an ENTR OSA2, and the solution was updated
microcode. Have you been able to identify what happens at the
What is the date or number of this lastest microcode?
thanks,
[]'s,
--
Antonio Pires
Suporte Tecnico - AGANP
Ann Smith wrote:
If they gave you the latest microcode, there are a whole bunch of VM TCPIP fixes
that you should apply-if you are running VM, but it sounds like you may not be.
"Anttni
Rich Smrcina wrote:
You say they changed your card, but the bigger question is: Did they give you
updated microcode?
On Wednesday 12 March 2003 07:35 am, you wrote:
Hi Friends,
Frequently my Linux, suddenly, stop to communication with my network,
and they can be accessed just by the console ma
Hi Friends,
Frequently my Linux, suddenly, stop to communication with my network,
and they can be accessed just by the console machine. All LPARs using
the same CHPID, which that stopped linux are using, stop to work too.
Then all Linux configured to use that CHPID stop to work. I tried to
restar
Rich Smrcina wrote:
This wasn't installed via YaST. I scanned the CD's and didn't see anything
that was versioned quite that way.
On Thursday 20 February 2003 03:42 pm, you wrote:
Yast will find the packages you need automagically. Other was is look in
the "d' section and find the right libs pac
Hi,
in this page, the 64 bits value is for Operating Systems, not for
Java! The IBM Java SDK tested is 32 bits.
[]'s,
Antonio Pires.
Seifert, Harald wrote:
A good link is http://www-106.ibm.com/developerworks/java/jdk/linux/tested.html .
Regards
Harald Seifert
Informatik-Systemprogrammie
Hi friends,
I would like to know if there is a java 64 bits. Where can I find it?
thanks in advanced,
Antonio.
22 matches
Mail list logo