Hi Neale,
are you also able to reproduce this problem on RHEL-8.3? If yes, could you
please report it via https://bugzilla.redhat.com against anaconda for
further review? Please, attach log files from /tmp (you can ssh as root to
the installation environment).
Such problems (Anaconda DBus modules
On Wed, Apr 15, 2020 at 10:29 PM Martha McConaghy <
martha.mccona...@marist.edu> wrote:
> I feel like Alice through the looking glass at this point. I was hopeful
> that mkinitrd would do the trick, but now I have a whole new problem.
> After bringing the disk online, adding it to
Hi Jake,
/etc/vsftpd/vsftpd.conf is owned by the vsftpd package, so installing the
package will create the config file:
# yum install vsftpd
Regards,
Jan
On Thu, Sep 19, 2019 at 10:57 AM Jake Anderson
wrote:
> Hi
>
> I don't have vsftpd.conf in my redhat 8.1 /etc/
>
> Is it possible to
Hi Peter,
you can run RHEL-8 on zVM 6.4 if you run it on z13 or later.
Regards,
Jan
On Tue, May 14, 2019 at 8:51 PM Peter wrote:
> Hi Group
>
> Just wanted the check if I can run RHEL 8 on zVM 6.4 ?
>
> Peter
>
> --
> For
Hi Neil,
check RHEL-7 Installation Guide, there is a section describing how to
add DASDs:
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/installation_guide/chap-post-installation-configuration-s390#sect-post-installation-dasds-setting-online-persistently-s390
Also
Jim,
when installing in an LPAR, the installer should ask you for additional
boot parameters:
Enter additional kernel command line parameter (end with ctrl-d or .)
>
This is where you need to specify the installation source
(inst.repo=...) and configure networking in case of http/ftp/nfs
You can check /etc/sysconfig/initial-setup and set
RUN_INITIAL_SETUP=NO
Initial setup is failing to start when you log in, this should disable
it from running.
On 03/03/2016 07:19 PM, Frank M. Ramaekers wrote:
Okay, got through an install of ClefOS 7.1.1503, but I keep getting
email like:
t: 0065 Index: 0065
00: Options: Ethernet Broadcast
00: Unicast MAC Addresses:
00: 02-00-01-00-00-21 IP: 10.1.20.82
00: Multicast MAC Addresses:
00: 01-00-5E-00-00-01
00: 33-33-00-00-00-01
00: 33-33-FF-00-00-21
(Shared with my
Peter,
the best starting point is the Installation guide available at:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Installation_Guide/part-installation-system-z.html
The guide also describes kickstart installations.
Regards,
Jan
On 02/22/2016 05:17 PM,
It looks like incorrect parameters in the CMS parameter file.
Since ClefOS is based on RHEL, I would recommend reading the RHEL
installation guide:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Installation_Guide/part-installation-system-z.html
Especially this
Hi,
does it work if you replace:
root=live:https://dl.fedoraproject.org/pub/fedora-secondary/releases/23/Server/s390x/os/images/install.img
with:
inst.repo=https://dl.fedoraproject.org/pub/fedora-secondary/releases/23/Server/s390x/os/
?
On 8.12.2015 16:22, Tom Huegel wrote:
I am trying to do a
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
--
Jan Stodola
Quality Assurance Engineer
Red Hat Czech s.r.o., Purkynova 99/71, 612 45 Brno, Czech Republic
Email: jstod...@redhat.com
information on Linux on System z, visit
http://wiki.linuxvm.org/
--
Jan Stodola
Quality Assurance Engineer
Red Hat Czech s.r.o., Purkynova 99/71, 612 45 Brno, Czech Republic
Email: jstod...@redhat.com
--
For LINUX-390
Gadi,
this a known issue, unfortunately. It is mentioned as a know issue in
the Release notes for RHEL-7.0 [1]:
anaconda component, BZ#1070104
It is not possible to install Red Hat Enterprise Linux 7 from the
installation DVD using the Hardware Management Console (HMC) on IBM
System z
Hi Tom,
see comments bellow.
On 01/14/2015 12:01 AM, Tom Huegel wrote:
MY PRM FILE
ro ramdisk_size=4 cio_ignore=all,!0.0.0009
vnc
rd.dasd=0.0.0250,251,252,253,254
rd.dasd=0.0.025f
ip=1xx.xx.xx.126::1xx.xx.xx.1:255.255.254.0:fedora.hhh.com:eth0:none
There is a new naming scheme for network
William,
see comments bellow.
On 09/18/2014 01:08 AM, Scully, William P wrote:
Filipe, Neale, Mike,
Can you offer some advice? I'm having trouble getting my PRM file to work.
Based on this thread, and others, here's what I've coded:
ro ramdisk_size=4 cio_ignore=all,!condev
email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
--
Jan Stodola
Quality Assurance
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
--
Jan Stodola
Quality Assurance Engineer
Red Hat Czech s.r.o., Purkynova 99/71, 612 45 Brno, Czech Republic
Email: jstod...@redhat.com
with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
--
Jan Stodola
Quality Assurance Engineer
Red Hat Czech s.r.o., Purkynova 99
19 matches
Mail list logo