On 01/27/2010 09:51 PM, Moeur Tim C wrote:
> CPU, it stops and I have to enter that information manually.
> It is possible that the other
> strange 'logon to an SSH session to continue' requirement that both Sue
> and I saw is also resolved by adding that second CPU.
When the installer starts wit
Here are the technical (not in tremendous detail I admit) notes from
bugzilla 506898:
"When installing to a z/VM guest or LPAR that is configured with 1 CPU
and/or less than 2 GB storage (memory), the installer will prompt for
the network configuration, regardless of whether these parameters appe
Scott,
Without saying too much until the errata is released, it was/is a kernel
issue. I will check around today and see if it will be ok for me to post
the technical comments from the bug here.
Justin
On 01/28/2010 10:39 AM, Scott Rohling wrote:
I don't have a RH login or anything, so can't v
I don't have a RH login or anything, so can't view this... but very
curious bug! I was really confused when Sterling suggested defining a 2nd
CPU.
Scott
On Thu, Jan 28, 2010 at 8:35 AM, Justin Payne wrote:
> Tim,
>
> This is a known issue and can be followed here:
>
> https://bugzilla.redha
From: Moeur Tim C
Sent: Wednesday, January 27, 2010 1:27 PM
To: 'Linux on 390 Port'
Subject: RE: Rhel 5.4 install problems
I, too, have had the same experiences. My old RHEL 5.2 installation
process worked (and still works) properly catching that redhat.conf
file. Under 5.4, ho
SSH session to continue' requirement that both Sue
and I saw is also resolved by adding that second CPU.
Tim
-Original Message-
From: Moeur Tim C
Sent: Wednesday, January 27, 2010 1:27 PM
To: 'Linux on 390 Port'
Subject: RE: Rhel 5.4 install problems
I, too, have had
ry 19, 2010 4:00 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Rhel 5.4 install problems
I'm trying to install Rhel 5.4 under VM, and it's not doing what I
think it should be doing as far as the redhat.conf file is concerned. I
installed Rhel 5.3 a couple of months ago (using the redhat parm
Mark Ver wrote:
Try defining a second cpu
DEF CPU 02
Or try doing a define stor of 2G or greater.
If I recall correctly, there was an issue found with parameter file
handling on RHEL 5.4 installer image that required such restrictions. I
think this will be documented in an updated release no
In the redhat.conf file I think you need to use lower case letters for the
device number triple.
Try SUBCHANNELS="0.0.e017,0.0.e018,0.0.e019"
Cliff Laking
IBM United Kingdom
--
Date:Tue, 19 Jan 2010 18:00:08 -0500
From:Sue Sivets
Subject: Rhel 5
> Try defining a second cpu
>
> DEF CPU 02
Or try doing a define stor of 2G or greater.
If I recall correctly, there was an issue found with parameter file
handling on RHEL 5.4 installer image that required such restrictions. I
think this will be documented in an updated release notes if not don
?? Because ?
Scott
On Tue, Jan 19, 2010 at 4:06 PM, Sterling James wrote:
> Try defining a second cpu
>
> DEF CPU 02
>
> -
> Please consider the environment before printing this email and any
> attachments.
>
> This e-mail and any attachments are in
Try defining a second cpu
DEF CPU 02
-
Please consider the environment before printing this email and any
attachments.
This e-mail and any attachments are intended only for the
individual or company to which it is addressed and may contain
information whic
I'm trying to install Rhel 5.4 under VM, and it's not doing what I
think it should be doing as far as the redhat.conf file is concerned. I
installed Rhel 5.3 a couple of months ago (using the redhat parm & conf
files), so I copied both the parm and conf files from that system to the
191 disk for
13 matches
Mail list logo
