without 3270 controller on hmc
I attended an IBM z/VM for Linux Administrator class last year, they had
indicated that HMC support was being worked on for the OPERATOR console. In
fact you can specify SYSCONS (sp?) in the SYSTEM CONFIG as of z/VM 3.1 even
though it was not yet fully implemented
On Monday, 06/10/2002 at 08:43 CST, Davis, Jeff [EMAIL PROTECTED]
wrote:
I believe, however, that if you need to use the stand alone loader
screen to
select your nucleus, etc, a 3270 is required.
Right, Jeff. You also need it for stand-alone DDR. (DSF supports the
HMC; stand-alone dump
Thanks to all who responded. I understand about the utilities which use 3270
data streams and/or require an interrupt from a real device, but I often find
myself in situations at customer sites where I need to bring systems up to
test something and cannot afford to wait until a gen takes place.
Actually, yesterday was the first time I used the HMC console as the IPL
console. First IPL of z/VM 4.3 and the config on the 2074 was wrong so
I completed IPL on the HMC including enabling the address on the 2074.
Phil
Alan Altmark wrote:
On Saturday, 06/08/2002 at 08:18 EST, Steven J.
I attended an IBM z/VM for Linux Administrator class last year, they had
indicated that HMC support was being worked on for the OPERATOR console. In
fact you can specify SYSCONS (sp?) in the SYSTEM CONFIG as of z/VM 3.1 even
though it was not yet fully implemented.
Is this no longer a planned
My understanding is that z/VM does not support the HMC
Patrick A. Carroll
Senior Systems Engineer
L. L. Bean
Casco St
Freeport, ME 04033
(207) 552-2426
[EMAIL PROTECTED]
Subject: ipl z/vm without 3270 controller on hmc
is it possible to ipl z/vm in an lpar without a 3270 controller and a 3270
display,
using the hmc display? then acquire the operator console via tn3270 via
the
osa?
is it possible to ipl z/vm in an lpar without a 3270 controller and a
3270 display, using the hmc display? then acquire the operator console
via tn3270 via the osa?
In practical terms, no. You MUST have a 3270 controller to INSTALL z/VM.
Regards, Jim
Jim is right. To install z/VM you need a controller... but to IPL z/VM
after installation no controller is needed.
Rob
- Original Message -
From: Jim Elliott [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, June 07, 2002 3:22 PM
Subject: Re: ipl z/vm without 3270 controller on hmc
On Fri, 7 Jun 2002 14:36:41 -0400 Pat Carroll said:
My understanding is that z/VM does not support the HMC
Unless you are using an MP-3000 where you can define an 3174 control
unit as an emulated device and use the TN3270 on the HMC to connect to
it.
On Friday, 06/07/2002 at 02:36 AST, Pat Carroll [EMAIL PROTECTED]
wrote:
My understanding is that z/VM does not support the HMC
z/VM *does* support the HMC integrated system console. A 3270 is
required for installation and configuration, but not for operation.
Alan Altmark
Sr. Software
11 matches
Mail list logo
