I've updated my machine and now my Logitech remote is giving me multiple
events on a single keypress. I use the Logitech learning remote as a
relacement for the original (which works fine) Card is a Hauppauge Win-TV
Nova-T which I believe uses the budget-ci driver, I've heard this has been
On Tue, March 6, 2007 12:20, Dom H wrote:
Event: time 1172928613.397507, type 1 (Key), code 108 (Down), value 1
Key Down pressed
Event: time 1172928613.649279, type 1 (Key), code 108 (Down), value 2
Event: time 1172928613.685270, type 1 (Key), code 108 (Down), value 2
Event: time
Hi there,
I was wondering, does every Nova-T 500 owner (using it on Linux) suffer from
the USB disconnect malfunction? Or is there someone out there who runs it
perfectly? My setup (Ubuntu 6.10 + 2.6.20.1 kernel + latest v4l dvb
Mercurial) suffers from usb disconnects, and because of that,
On Tue, March 6, 2007 13:20, Dom H said:
I've updated my machine and now my Logitech remote is giving me multiple
events on a single keypress. I use the Logitech learning remote as a
relacement for the original (which works fine) Card is a Hauppauge Win-TV
Nova-T which I believe uses the
Hartmut Hackmann a écrit :
Hi, Emmanuel
Emmanuel Quémener schrieb:
Hartmut Hackmann a écrit :
Hi, Emmanuel
Emmanuel Quémener schrieb:
Emmanuel Quémener a écrit :
Hartmut Hackmann a écrit :
I noticed 2 things:
I'm sorry that I haven't answered you ealier.
I'm rather busy these days.
Okay, the problem is with rmmod / insmod.
Actually I have rmmod problems too with my PCI DVB-C-card.
I can do anything with my card, but not use rmmod command.
So my current fix is, that I never use rmmod. I just reboot
On 3/6/07, Eduard Huguet [EMAIL PROTECTED] wrote:
Hi there,
I was wondering, does every Nova-T 500 owner (using it on Linux) suffer
from the USB disconnect malfunction? Or is there someone out there who runs
it perfectly? My setup (Ubuntu 6.10 + 2.6.20.1 kernel + latest v4l dvb
Mercurial)
On 6 Mar 2007, at 15:53, Eduard Huguet wrote:
One problem that I do suffer is that I can't detect any channels
from within MythTV. I need to manually scan them by using dvbscan
and then import the channels.conf file.
I've only managed to tune with kaffeine. Any other tool simply
doesn't
Richard Lithvall wrote:
I asked a few questions in the linux-usb-dev mailing list. And one of
the developers thought this might have been caused by a bug that only
got fixed post-2.6.20. I haven't had a chance to try this yet, but
you can read about it here:
Hi at all,
I'm testing a DVB-H TS file stored on my pc. In order to analyze the single
H.264 over RTP flows, I need to extract the ES from TS and after analyze the
RTP packet. I found on Internet some applications for ES extraction, but I
don't know the way to 'read' a stored H.264 over
On Tuesday 06 March 2007 16:53:19 Eduard Huguet wrote:
One problem that I do suffer is that I can't detect any channels from
within MythTV. I need to manually scan them by using dvbscan and then
import the channels.conf file. Doing so, I can watch all the channels
in my area. I don't receive
Hi folks,
as part of the Debain package dvb-utils 1.1.1-2 the szap utility has the
following bug:
1. The start transponder file of Eutelsat Hotbird13.0E contains a H as
description of the polarization.
2. Unfortunately this H is being interpreted as V.
3. So if you try to produce a
Uwe Bugla schreef:
Hi folks,
as part of the Debain package dvb-utils 1.1.1-2 the szap utility has the
following bug:
1. The start transponder file of Eutelsat Hotbird13.0E contains a H as
description of the polarization.
2. Unfortunately this H is being interpreted as V.
3. So if you try to
I'm looking to purchase a PCI bus extender by Magma to use with my Nexus-S,
SkayStar2 and Twinhan cards. Before I spend the money, however, I wanted to
cover my bases and make sure I'm not going to run into any latency or timing
issues with slots in the extender. Has anyone has success using one
Le mardi 6 mars 2007 16:43, Francesco Schiavarelli a écrit :
Stéphane Esté-Gracias wrote:
I found on Internet a free application to extract PES or ES from a TS,
but don't know how I can 'de-packetize' the RTP/UDP/IP stack to
visualize the raw H.264 stream. Do you know application in order
On Tue, Mar 06, 2007 at 04:38:17PM +, Dom H wrote:
Forgot to say, my card uses the cx88 driver.
I'm sorry but my knowledge is mostly on the ir handling of the budget-ci
driver.
I'll forward this to the linux-dvb list...hopefully someone with more
insight in the cx88 driver will be able
Hi All!
I have a couple of questions regarding the Nova 500 T.
1. How can I be sure that it is _the_ USB-disconnect bug i am getting? I
guess there is other kinds of BUGs and Ooopses to.
2. SNR is not reported in tzap (always equal to ). Signal, ber, unc
is reported. Does this depend on
On Tue, 6 Mar 2007, Michael Krufky wrote:
#2, I have made some corrections to the document. Please see these
corrections
inline below.
I'll add some too.
+drivers. They are a volunteer, non-remunerated, group of people that
^^^ ???
[I
Am Dienstag, den 06.03.2007, 11:14 -0500 schrieb Michael Krufky:
Mauro Carvalho Chehab wrote:
Hi Guys,
The last time we've reviewed our procedures were on March, 2006. I think
it is time to review the documents (there's still an even more ancient
file, from 2005!).
I'm enclosing a
hermann pitton wrote:
Am Dienstag, den 06.03.2007, 11:14 -0500 schrieb Michael Krufky:
Mauro Carvalho Chehab wrote:
Hi Guys,
The last time we've reviewed our procedures were on March, 2006. I think
it is time to review the documents (there's still an even more ancient
file, from 2005!).
On Tue, Mar 06, 2007 at 06:52:48PM +0200, Ville-Pekka Vainio wrote:
David Härdeman kirjoitti viestissään (lähetysaika tiistai, 6. maaliskuuta 2007
15:26:20):
On Tue, March 6, 2007 13:20, Dom H said:
I've updated my machine and now my Logitech remote is giving me multiple
events on a single
Kirjoitit viestissäsi (lähetysaika keskiviikko, 7. maaliskuuta 2007 00:18:49):
I've been having the same kind of problems with Technotrend C-1500 and
it's bundled remote (a grey one). I tried loading ir-common with
repeat=0, but still it seems to take quite a long time before the
keypress
Hi, Emmanuel
Emmanuel Quémener schrieb:
Hartmut Hackmann a écrit :
Hi, Emmanuel
Emmanuel Quémener schrieb:
Hartmut Hackmann a écrit :
Hi, Emmanuel
Emmanuel Quémener schrieb:
Emmanuel Quémener a écrit :
Hartmut Hackmann a écrit :
Hi,
my new notebook is equipped with a DVB-T card, and I fear there may be
no support for it on Linux, yet.
The notebook (ASUS A7CC-7S018C) was released about a month ago, and I
guess the hardware is about the same age. Therefore, I'm not really that
surprised at not finding any information about
...
When we start debugging this, you should set the options debug=1 for
the modules tuner and tda827x. Then the drivers report what they try to
do with the gain.
Hi,
video_buf_dvb seems to be a problem on auto.
I'll try again, if some stop teaching native english to the Indians.
Cheers,
On Tuesday, 6 March 2007 at 12:20:39 +, Dom H wrote:
I've updated my machine and now my Logitech remote is giving me multiple
events on a single keypress. I use the Logitech learning remote as a
relacement for the original (which works fine) Card is a Hauppauge Win-TV
Nova-T which I
I don't receive any EIT info, though. I wonder if this is because of
the relatively poor signal in my area or precisely because the
channels are externally scanned and then MythTV doesn't have all the
required info to receive EIT data.
I also didn't get EIT data when importing the channels.
On Tue, March 6, 2007 23:59, Ville-Pekka Vainio said:
Kirjoitit viestissäsi (lähetysaika keskiviikko, 7. maaliskuuta 2007
00:18:49):
I'm not quite sure I follow, you have the same kind of problem (i.e.
that a continous keypress generates repeat events)? But then you talk
about time before the
It seems that effectively when using externally-generated data MythTV is not
able to receive EIT. Unfortunately there seems to be a problem with my card
and MythTV regarding internal channel scanning. Someone has pointed me to
generate a log report some messages ago while scanning, maybe then
29 matches
Mail list logo