tv.org/downloads/firmware/dvb-usb-bluebird-01.fw Put this into
/lib/firmware (location may vary depending on the distro) Plug the device in,
and then it should function with any standard dvb application. Good Luck, Mike
Krufky-- next part --An HTML attachment was
scrubbed...U
ary depending on the distro) Plug the device in,
and then it should function with any standard dvb application. Good Luck, Mike
Krufky
-- next part --
An HTML attachment was scrubbed...
URL:
http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070719/545d2907/attachment-0
Hi,Mike
You mean you watch HDTV using mplayer, do you?
When I use mplayer to play a HDTV channel, it just can't work properly.
在2007-07-19，"Michael Krufky" <[EMAIL PROTECTED]> 写道：
lwtbenben wrote: > Dear Michael: > I got the firmware and now the card works
properly. > But only for SDT
Hi,
the Technisat Viola/DigitelMo 1 (PCMCIA) DVB-T card is available at very
low cost (ca. 19.- Euro in Germany), so I was considering buying one.
http://www.litec-computer.de/PC-Komponenten/TV-Karten/DVB-T-PCMCIA-Technisat-Viola-DigitelMo-1-mit-Antenne::10949.html
What is the status of the driv
Hello Akiva
I write that problem not inside function that you write
problem is inside dvb_ca_en50221_write_data it setup HC and clear SW,
so for module it looks like standart write data to it not i buffer size
so delay is not helps 100% a also try it :) before searching inside.
and still waitng
Evgen, all,
I'm only a stupid newbie in the linuxtv world,
but from my experience with CAM cards it seems to me that Eugen's observation
is correct but not precious:
IMHO, the sequence should be (from the DVB-CI standard):
1) "host now tells the module to use this buffer size by writing a
Good morning, ladies & gents!
I've just received a new Hauppauge WinTV Nova-HD-S2 from Germany which is
Hauppauge's new budget DVB-S2 card. I was wondering if there are any plans
to support this card in the driver, whether just for DVB-S or for DVB-S2
also?
The kind folks at Hauppauge Germany ha
Bernhard Rosenkraenzer wrote:
> I'm trying to port the stb0899 driver snapshot to run on top of current
> v4l-dvb - most of it is pretty straightforward, I'm down to 1 line that needs
> fixing:
>
> rc = dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf, p->frequency, 0);
>
> What's the pro
I have TT Budget-S1500 + CI addon, and have many CAM blocks.
So i start to test all of them on such card. And have found
that some amount of cam blocks not working on it. I know that
such card give full hw access to CAM blocks registerm and ram.
So i start to search where is problem (write small ap
Am Donnerstag, 19. Juli 2007 16:25:38 schrieben Sie:
> Am Donnerstag, 19. Juli 2007 16:19:17 schrieben Sie:
> > Am Donnerstag, 19. Juli 2007 12:35:14 schrieben Sie:
> > > Le mercredi 18 juillet 2007 19:20, Uwe Bugla a écrit :
> > > > Am Mittwoch, 18. Juli 2007 17:21:07 schrieben Sie:
> > > > > Le m
lwtbenben wrote:
> Dear Michael:
> I got the firmware and now the card works properly.
> But only for SDTV, when I saw HDTV using my card and totem-xine,
> it seems good for about 2 mins and then it gives me bad performance.
>
> What is the problem? Is it the hardware or the mo
Le mercredi 18 juillet 2007 19:20, Uwe Bugla a écrit :
> Am Mittwoch, 18. Juli 2007 17:21:07 schrieben Sie:
> > Le mercredi 18 juillet 2007 16:13, Uwe Bugla a écrit :
> > > 2. Kaffeine's channel lists should not be sorted by a couple of numbers
> > > that absolutely do not make any sense.
> > > The
At this point I am able to attach both, the demod (mt352) and the tuner
(mt2060).
Registers can be read from both chips. I use Kaffeine as DVB player.
Next step is to manage to tune channels. It seems the Pinnacle USB protocol
needs to be analyzed in a more detailed way.
The read and write comma
Dear Michael:
I got the firmware and now the card works properly.
But only for SDTV, when I saw HDTV using my card and totem-xine,
it seems good for about 2 mins and then it gives me bad performance.
What is the problem? Is it the hardware or the movie player?
Which player
Hi,
I'm trying to port the stb0899 driver snapshot to run on top of current
v4l-dvb - most of it is pretty straightforward, I'm down to 1 line that needs
fixing:
rc = dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf, p->frequency, 0);
What's the proper way to replace that? (Right now, my
On Thu, 19 Jul 2007, Pedro Aranda wrote:
> Hi folks,
> Problem: MT-2060 doesn't register => no frontend
>
> Solution: attached patch
>
> Request: include it in the mainstream ASAP: I'm really sick of
> having to recompile the DVB subsystem everytime a kernel update
> happens
>
> THANKS a lot
Try r
On 7/19/07, Pedro Aranda <[EMAIL PROTECTED]> wrote:
>
> If this is the level to be expected in this list, I fear I will loose more
> time
> reading it than testing new kernels and eventually patching them to make
> my USB adapter work. It's really sad :( I got the solution from the
> archives of th
If this is the level to be expected in this list, I fear I will loose more time
reading it than testing new kernels and eventually patching them to make
my USB adapter work. It's really sad :( I got the solution from the
archives of this mailing list. It was pointed out some time ago and it seems
t
Am Donnerstag, 19. Juli 2007 10:40:51 schrieb timecop:
> On 7/19/07, Pedro Aranda <[EMAIL PROTECTED]> wrote:
> > Hi folks,
> >
> > System description:
> >
> > [EMAIL PROTECTED]>uname -a
> > Linux paag 2.6.21-2-686 #1 SMP Wed Jul 11 03:53:02 UTC 2007 i686
> > GNU/Linux
> >
> > Distro: up-to-date Deb
On 7/19/07, Pedro Aranda <[EMAIL PROTECTED]> wrote:
>
> Hi folks,
>
> System description:
>
> [EMAIL PROTECTED]>uname -a
> Linux paag 2.6.21-2-686 #1 SMP Wed Jul 11 03:53:02 UTC 2007 i686 GNU/Linux
>
> Distro: up-to-date Debian testing
>
> Problem: MT-2060 doesn't register => no frontend
>
> Soluti
Hi folks,
System description:
[EMAIL PROTECTED]>uname -a
Linux paag 2.6.21-2-686 #1 SMP Wed Jul 11 03:53:02 UTC 2007 i686 GNU/Linux
Distro: up-to-date Debian testing
Problem: MT-2060 doesn't register => no frontend
Solution: attached patch
Request: include it in the mainstream ASAP: I'm reall
Am Donnerstag, 19. Juli 2007 02:29:34 schrieben Sie:
> Uwe Bugla wrote:
> > Am Mittwoch, 18. Juli 2007 06:03:41 schrieb P. van Gaans:
> >> I don't call myself a programmer (I've never seen any C guide), but
> >> somehow I figured out how to add an extra switch to tzap to make it
> >> print the stat
22 matches
Mail list logo
