Thanks for help. ;)
Paul
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
hable) [size=2K]
Capabilities: [40] Power Management version 2
I've tried googling the error and haven't had much luck in finding a
solution. I was wondering if anyone has any suggestions that can assist in
troubleshooting why the driver won't load.
Thanks,
Paul
___
Hello,
After trying to have it working under Mandriva 2008, it is not anymore
recognized (a in XP).
So I guess i have erased some data for identification.
Is there any way to restore the identification data (firmware ?) on a
DVB-T ?
All the best
_
Good job on the wiki so far. At last there is one place that can serve as a
showcase for all the hard work done.
I'm going to be a pain now ...
Can this too functionality be included in the wiki too ? :)
On Jan 21, 2008 7:15 PM, Ulrich Eckhardt <[EMAIL PROTECTED]> wrote:
> Craig Whitmore wrote
AIL PROTECTED]> wrote:
> Jean Paul Gatt wrote:
> > In the meantime ...
> >
> > While the whole kernel debate goes on ...can the wiki be updated with a
> > semi-standard procedure to follow ?
> >
> > Something on the lines ... you need this basic
In the meantime ...
While the whole kernel debate goes on ...can the wiki be updated with a
semi-standard procedure to follow ?
Something on the lines ... you need this basic code .. and patch it
with this diff file .
Nothing too complex! I'm just like Ian. Been following development on this
ca
an
> everyone try it please?
I'll give it a whirl over the next few days, thanks.
--
Paul Elliott (omahn)
Systems Engineer, Option-C Services
[EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
T works
fine).
> I guess that Patrick has run out of ideas, has little time to dedicate,
> or has better things to do these days.
That's fair enough. I think I'll stick with the Nova-T for now, it's
much safer around the wife. :-)
--
Paul Elliott (omahn)
Systems Engineer, O
card would disconnect
within minutes of boot and several hours at best. I've taken it out
now and I'm now using a Nova-T and the PVR350 without any issues.
--
Paul Elliott (omahn)
Systems Engineer, Option-C Services
[EMAIL PROTECTED]
___
lin
the issue?...
--
Paul Elliott (omahn)
Systems Engineer, Option-C Services
[EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
in
dmesg though. Is this the USB disconnect issue that others have seen?
--
Paul Elliott (omahn)
Systems Engineer, Option-C Services
[EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
/ ### ## / #### ## ## ##
## ##/ #### ## ## ##
## ## #### ## ## ##
## ## #### ## ## ##
## ## ##/# ## /# ##
## ##/ ## ##/ ## ### /
## ## ## ### ## # ## ##/
### # /
###/
#/
###
Linux paul-gentoo 2.6.22-gentoo-r5
x86_64
So technically I will not be posting a query regarding DVB-S on linux, but
the system I am trying to build will ultimately be feeding into Linux
Powered Tuners and PC cards on linux systems, so if anyone can still clarify
this for me .. I will appreciate!!
I need to build a system that can support
Is this patch being considered to be added to the main branch?
Even if it is not strictly DVB .. shouldn't this be added since it adds
somewhat vital functionality?
On 8/1/07, Darron Broad <[EMAIL PROTECTED]> wrote:
>
> In message <[EMAIL PROTECTED]>, Darron Broad wrote:
> >
> >LO
> >
> >I have a
e and what sort of debug or output
would they need to figure out where the problem exists.
Thanks
Paul
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On 17/07/07, Nicholas Fearnley <[EMAIL PROTECTED]> wrote:
> I have struggled to get the T-1500T working for ages now. Just no
> lock, or luck.
>
> But the other day I had a friend ask if I had a spare TV card. So I
> gave him a T-1500T. He runs windows.
>
> The card will not tune.
> So w
On Mon, 11 Jun 2007, Paul Walmsley wrote:
> thanks for the info. Please forgive a naive question - why doesn't the
> page at http://www.linuxtv.org/repo/ point to that site?
ok, never mind -- I think I get the idea ...
http://lkml.org/lkml/2007/5/31/37
e a naive question - why doesn't the
page at http://www.linuxtv.org/repo/ point to that site?
- Paul
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
tches were submitted upstream, but the changes aren't
in the v4l-dvb Mercurial repo, so, here they are again.
These instructions are also very helpful for using the device on Linux:
http://www.lea-linux.org/cached/index/Num%C3%A9riser_une_cassette_VHS_sous_Linux.html
Signed-off-by: Paul W
ichelle Dupuis wrote:
> Have you tried 'udevinfo' ? That will give you the specs on any device.
>
> MD
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Paul
> Sent: Wednesday, June 06, 2007 9:26 PM
> Cc:
guessing from the dmesg log... but not sure must be some better
way..
Paul
On 6/06/2007 6:48 PM, Chris Malarky wrote:
> Hi Paul,
>
> On Wed, 2007-06-06 at 13:02 +1000, Paul wrote:
>> I have a few questions and suggestions now I see some activity on the
>> dvb-apps
>>
>
On 6/06/2007 6:48 PM, Chris Malarky wrote:
> Hi Paul,
>
> On Wed, 2007-06-06 at 13:02 +1000, Paul wrote:
>> I have a few questions and suggestions now I see some activity on the
>> dvb-apps
>>
>> Q.1 tzap
>> This seems loop indefinately can we also have op
I have a few questions and suggestions now I see some activity on the dvb-apps
Q.1 tzap
This seems loop indefinately can we also have option to limit the output to a
count or
duration eg -count 10 or -time 5 secs
Q 2. DVB_Frontend_API document output is in what units (eg Db , % or someother
On 2/06/2007 12:40 PM, Paul wrote:
> any point me towards any script I can run which outputs signal strength
> for my DVB channels so I can schedule it to run outside of MythTV.
> azap output is a little cryptic for me.
>
> ie I want to run a cron job which measures my DVB ch
any point me towards any script I can run which outputs signal strength for my
DVB
channels so I can schedule it to run outside of MythTV.
azap output is a little cryptic for me.
ie I want to run a cron job which measures my DVB channels to check to see if
signal
strength and reception is o
Just curious ... Any improvements on this card?
I have been putting off buying it for months now. Child shows potential ...
:)
On 5/6/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Hi again!
Im answering my own mails - thats a great way to get the answers you
want ;-)
I have had a little s
Just bought a Hauppauge WinTV Nova-T stick and plugged it into Ubuntu
Fiesty (2.6.20). All I had to do was download the firmware and place
it in the correct directory. After plugging in, I get the following
messages:
[10323.652000] usb 5-5: USB disconnect, address 3
[10323.652000] dvb-usb: Haupp
On 24/04/07, Mario Rossi <[EMAIL PROTECTED]> wrote:
Hi,
I've had a Hauppauge DEC T 2000 (dvb terrestrial) which worked on USB
1.1 and I did not have any problem with the bandwidth.
I think it would be very unlikely that the board compresses the MPEG2
stream before sending it to the PC.
It is mo
On 21/04/07, Mario Rossi <[EMAIL PROTECTED]> wrote:
Hi,
I would like to buy the same card to receive DVB-C from Virgin Media in the UK.
It seems that this is the only DVB-C USB card supported by Linux (and
one of the very few existing).
I've sent recently a couple of mails to the mailing list tr
I have one of these devices running under kernel 2.6.18 with MythTV
(Gentoo). I am seeing a lot of artefacts and picture jitter while
watching live tv. I suspect this has something to do with speed of USB
1.1.
I am able to reboot into Windows and test the device with the original
device drivers u
Add another positive!!
Whilst browsing for information through both wiki's I can't help noticing
the fragmentation of information, and the difficulty in obtaining what I
need,
especially from the hardware part of the wikis. There are too many guides
out there, sometimes containing contrasting inf
I've upgraded to Kernel 2.6.20-1.2944.fc6 and the DVB device is now initialized
successfully.
Thanks
Paul
On 10/04/2007 7:40 PM, M A Young wrote:
On Sat, 7 Apr 2007, Paul wrote:
Thanks for that, but I wonder how to get an idea it this bit of code will fix
it, ie I
will probably have to
device; fix it!
Paul
On 6/04/2007 9:15 PM, M A Young wrote:
On Fri, 6 Apr 2007, Paul wrote:
Can you point me to the changelog ?
Have a look at this message
https://www.redhat.com/archives/fedora-test-list/2007-April/msg00111.html
in the fedora-test-list, which gives you the most recent changes
Can you point me to the changelog ?
Thanks
Paul
On 6/04/2007 6:19 PM, M A Young wrote:
On Fri, 6 Apr 2007, Paul wrote:
changing title to hopefully trigger some help, as I noticed other
threads which perhaps are related?
ie keywords of AirStar & FlexCop which is possibly the card / driv
changing title to hopefully trigger some help, as I noticed other
threads which perhaps are related?
ie keywords of AirStar & FlexCop which is possibly the card / driver I use.
Paul
On 6/04/2007 10:14 AM, Paul Wilson wrote:
I have two DVB devices but one of these fails to initialise aft
I have two DVB devices but one of these fails to initialise after I
update my FC6 kernel, I'm pretty sure its the Air2PC/AirStar 2 DVB-T PCI
card.
I have regressed back to kernel.i686 2.6.19-1.2911.6.5.fc6 which brings
my devices back online.
I have pasted the /var/log/dmesg output for both work
Just to confirm ...
Do analog an digital tv, and radio fm tuning work?
On 3/30/07, Gregoire Favre <[EMAIL PROTECTED]> wrote:
On Fri, Mar 30, 2007 at 11:54:21AM +0200, Uwe Schmeling wrote:
> The current implementation is supporting dvb-s interface. Everything in
> this environment is working f
Yes ...
That helps!!
Thank you very much.
On 3/30/07, Uwe Schmeling <[EMAIL PROTECTED]> wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jean Paul Gatt wrote:
> I was flipping through the mailing list to try and obtain a status about
> the
> ongoing development of suppor
I was flipping through the mailing list to try and obtain a status about the
ongoing development of support for this card ...
I noticed that there is some kind of work going on... but I was not able to
read what is exactly the state ... Can anyone point me out to more info
about ongoing developme
Thanks that site gave me exactly what I wanted
cheers
Paul
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
event3"
SUBSYSTEM=="input"
SYSFS{dev}=="13:67"
looking at parent device '/class/input/input3':
ID=="input3"
BUS=="input"
DRIVER==""
SYSFS{uniq}==""
SYSFS{phys}=="pci-0000:01:08.0/ir0"
SYSFS{
need to set my config as follows
cat /etc/sysconfig/lircd
LIRCD_OPTIONS="-H dev/input -d /dev/input/event3"
After a reboot with no h/w changes this swithes to input3/event3
This is driving me nuts as I have to check this after each reboot to see
if this has change
Marcel 't Hart wrote:
> Dear All,
>
> I have a KNC one with device number 0022. I used the HG sources and
> the patch from E9hack. my fedora box is able to find my device (from
> dmesg):
> KNC1-0: MAC addr = 00:09:d6:6d:75:5b
> DVB: registering frontend 0 (Philips TDA10023 DVB-C)...
> budget-av: c
ter (saa7133[0]).
DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...
nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)...
nxt2004: Waiting for firmware upload(2)...
nxt2004: Firmware upload complete
Thanks in advance for any c
vdr, had to compile a "softdevice"-plugin and got
it running, but I wont show me any channels (I couldn't get scan to
produce a channels.conf, so I googled for one and used it instead).
Now, what do I need? Firmware? Software? Is this ever going to work?
Please, help me getting
smartcard)
TIA
--
Paul Zwiers
On Fri, 26 Jan 2007, Paul Zwiers wrote:
> Hi All,
>
> I am fairly new to this DVB stuff and I got me a Hauppauge DVB-T box
> DEC2540-T. I am running SuSE 10.1 and try to get some TV on my screen. It
> has a smartcard that is working and when I con
.
I downloaded drivers and firmware and the system sees the USB-hookup and
loads the appropriate drivers. But now how do I go from here?
I have Kaffeine, Klear and the dvbscan, tune and list. Also I have a dvbd
daemon but that one is not loaded.
What can I do make it work?
TIA
Paul
nning 2.4.22 just so I can use the TV card. If anyone
> can tell me what I'm missing, please let me know - I'm getting pretty
> desperate here!
You need to compile and load budget_ci in order for the card to be
recognized.
Mattia
Are you sure this is the solution? I think some
t at times the AverDVB card will only display BBC1 & 2
without breaking up.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Hamish Moffatt
Sent: 29 April 2004 04:37
To: [EMAIL PROTECTED]
Subject: [linux-dvb] Re: AverTV DVB-T un-viewable QAM_64 ch
ne know what to do?
I'm using Mandrake 10 if that makes a difference.
Thanks in advance,
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
ugh. Could it be a typo?
>
In mythtv I get continuous prebuffer pauses when I change channels on my AverTV DVB
card (works fine if you exit and then re-enter live TV). My Nova-T's work great. I'm
running Myth 0.14, kernel-2.6.3-rc1 and the CVS dvb-kernel compiled in.
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Yep, I concur.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Hamish Moffatt
Sent: 11 January 2004 01:28
To: [EMAIL PROTECTED]
Subject: [linux-dvb] tda1004x firmware path in kernel 2.6.1
I just installed 2.6.1. It looks like none of the patches in CVS ar
Forgot to say I was using a Nova-t.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Michael Lothian
Sent: 19 January 2004 05:09
To: [EMAIL PROTECTED]
Subject: [linux-dvb] tda1004x with kernel 2.6.1
HAs anyone sucessfully managed to get one of these cards
I built the dvb-kernel into the 2.6.1 tree using makelinks and then
compiled in the drivers. I did find that the kernel ignored the location
I set for the firmware and opted for the default instead. You can see
the location when you do makeconfig.
Paul
-Original Message-
From: [EMAIL
?
thanks,
Paul.
_
It's fast, it's easy and it's free. Get MSN Messenger today!
http://www.msn.co.uk/messenger
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
As an alternative you could compile the dvb-kernel driver into the kernel. It's very
easy to do and works great.
devfs is depricated under 2.6, did you compile it in?
Have you got the firmware image installed?
Are there any offending messages under dmesg?
Paul
> ABBAS AL-MUTA
[linux-dvb] Re: Nova-t works only with a soft reboot from Windows
Date: Mon, 12 Jan 2004 17:28:31 +0000
Hi Paul
When you do the cold boot and it fails to tune can you check dmesg and see
if
you can spot any error messages (e.g. firmware upload failed)?
Thanks
John
On Monday 12 January 2004
Hi,
I've just recently got my hands on a hauppage Nova-t card. I'm running
Redhat Fedora with the default kernel and DVB driver 1.01.
The problem is I can't get the card to work in Linux unless I've tuned a
channel in windows and then perform a soft reboot into Linux If I cold
boot into lin
Is the dvb-kernel already in the 2.6.1 tree? I was under the impression
that this card required Mark Edward's driver, see
http://linuxtv.org/developer/dvb.xml
If you do get it working, pls could you post a howto - I'm trying with
exactly the same card and kernel.
Paul
-Origin
Hi Mark,
I did have a go a little while ago. I've learnt a fair bit since then so
I'll try again!
Thanks, Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Mark Edwards
Sent: 06 January 2004 00:06
To: [EMAIL PROTECTED]
Subject: [linux-dvb
referring to the Avermedia card, or is there another card around
called "Aver" ?
- Original Message -----
From: "Paul Woodward" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 06, 2004 10:04 AM
Subject: [linux-dvb] Re: aver dvb-t
> In theory i
In theory it can be made to work, but I've not managed it yet! If anyone
has any straight forward instructions please pass them on.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of MeDon
Sent: 05 January 2004 22:55
To: [EMAIL PROTECTED]
Su
with my Nova-t, not yet worked out how to get my AverTV DVB working. It's not too hard
to get going.
Paul
> Hi,
>
> In addition to my previous post I should add that simply following the
> instructions in the INSTALL file gave these results:
>
> [EMAIL PROTECTED] linuxtv
> Paul Woodward wrote:
> > Did it compile all the required modules? The lack of TDA1004x was very
> > puzzling - there was simply nothing in the config telling it to do it,
> > and not being a highly proficient kernel-compiler, I couldn't figure out
> > where i
menuconfig that asks where the
firmware is located, similar to the sp877xx (?).
Thanks, Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Lars von Wedel
Sent: 16 December 2003 23:24
To: [EMAIL PROTECTED]
Subject: [linux-dvb] Re: compiling dvb_kernel and ke
roblems?
Also has anyone got the Avermedia AverTV DVB card working?
Thanks in advance,
Paul
---
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.551 / Virus Database: 343 - Release Date: 11/12/2003
#
# Automatically generated make config: don't edit
#
CONFIG_X86
and '/dev/dvb/adapter0/demux0'
tuning to 21950 Hz
status 09 | signal | snr | ber | unc |
status 1f | signal | snr | ber | unc |
FE_HAS_LOCK
Note that the signal level and snr shouldn't be 0, but xine works
showing all chan
d 161 apid 81
input_dvb: status: 1f
input_dvb: sending event
input_dvb: ui title event sent
demux_ts: auto-detected video pid 0x00a1
demux_ts: auto-detected audio pid 0x0051
input_dvb: channel 'SBS EPG' freq 54350 vpid 163 apid 85
input_dvb: status: 1f
input_dvb: sending event
inpu
Hi,
FE_DISEQC_SEND_BURST is not implemented for the cx24110 frontend.
Will someone have time to work on it?
or
I'll be please to do it if I get access to the cx24110 documentation.
I have plenty of time: broken arm ;-(
--
Paul-Francois Fontigny <[EMAIL PROTECTED]>
--
Info:
To
?
I'm all for the dropping of the bttv driver and including the only gpio
and i2c in a separate file. The only problem is the Nebula card people
wont have access to their analog in but it is unused at the moment
anyway.
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED]
I've managed to work around the problem. My ISDN TA is an external BT Ignition Pro.
I've changed it over to the USB connection instead of the serial port and it works as
expected! No idea why though
>
> From: Paul Hirons <[EMAIL PROTECTED]>
> Date: Tue 29/Jul/20
I have noticed that the pings do not return to normal until I do:
"ifconfig dvb0_0 down" and also "dvbnet -d 0"
>
> From: Paul Hirons <[EMAIL PROTECTED]>
> Date: Tue 29/Jul/2003 08:53 GMT
> To: [EMAIL PROTECTED]
> Subject: [linux-dvb] Skystar2 data p
I have a dialup connection on ppp0. If I ping the P-t-P address then all is well and
it works with no packet loss.
However, if I install the modules for the skystar2 card (dvb-core, skystar2 and
mt312), then run the net_start.sh script to setup the dvb0_0 interface (which uses
dvbnet) I then g
I have downloaded the latest DVB code from cvs and made, installed the drivers for the
Skystar2 card. I then run the net_start.sh script to setup a data interface "dvb0_0".
If I "tcpdump -i dvb0_0" then i see some activity for a short time and then it stops.
If i then run szap again to set the
tuners interact with the
bttv driver because they must communicate with the i2c interface as
well.
Thanks
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
course Gerd Knorr (bttv and video4linux maintainer) is refusing the
> patch because it stinks. 8-)
>
> So someone with a Nebula card and kernel programming knowledge needs to
> fix this the right way.
Paul
#!/bin/sh
#depmod -ae
case "$1" in
start)
echo -n -
.
This problem with preemption, does it have to be tested in the
2.6.0-test1 kernel or will the 2.4.21 do?
Paul
On Tue, 2003-07-15 at 22:34, Michael Hunold wrote:
> Hello all,
>
> I've added the patches that I've just send to Linus Torvalds and the
> Linux Kernel Maili
uot;struct tvcard bttv_tvcards" settings
I'm using. I had hoped by using the same as a Nebula Electronics card
it would load.
Can someone explain what the .muxsel, .svhs and .video_inputs are, or
somewhere to look?
Thanks
Paul
--- linux/drivers/media/video/bttv.h.oldSun
frequency = 12207 MHz V, symbolrate 2750, vpid = 0x00a0, apid
> >>>>>>= 0x0050
> >>>>>>using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> >>>>>>status 03 | signal 005a | snr | ber 0c46 | unc |
> >>>>>>status 00 | signal 0057 | snr | ber
er one.
3) tuxzap looks like a good one...
Good luck.
On Thu, 2003-07-10 at 21:08, Demeter Tibor wrote:
> Hella Paul !
>
> Very very thanx for you, because now i'm hear the "click" sound if i
> load the bttv moduled with the audioall=3 option.
> But the dvbstre
Hello again,
Can you please tell me why the Nebula card driver (bt878) isn't support
in the release branch? There was a mention of a patch preventing its
inclusion in the mail list but how this is a problem is unclear. And
will there be support in 2.6 kernels?
Thanks
Paul
Hello again,
Can you please tell me why the Nebula card driver (bt878) isn't support
in the release branch? There was a mention of a patch preventing its
inclusion in the mail list but how this is a problem is unclear. And
will there be support in 2.6 kernels?
Thanks
Paul
On Tue, 2003-06-17 at 22:34, Johannes Stezenbach wrote:
> Hi Paul,
>
> Paul Andreassen wrote:
> > This is a patch for the Comtech DVBT-6k07 tuner which is based on the
> > NXT6000 chip and has a BT878A backend.
>
> Looks good, except that sp5730_set_tv_freq() is un
This is a patch for the Comtech DVBT-6k07 tuner which is based on the
NXT6000 chip and has a BT878A backend.
Paul
--- nxt6000.c.org Tue Jun 17 17:21:12 2003
+++ nxt6000.c Tue Jun 17 18:22:49 2003
@@ -6,8 +6,10 @@
Alps TDME7 (Tuner: MITEL SP5659)
Alps TDED4 (Tuner
setup drivers to use case 2 of video output?
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
video cable was always conected between TV set and card. It looks
to me that the video output is broken ( the driveres are loaded with no
error message) Is there a posibility to use this card again ? on RGB or
YC mode ?
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "u
Does anyone know where I can get the NXT6000 spec sheet?
Thanks
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
for BT8x8 based cards in
the CVS at /dvb-kernel/linux/drivers/media/dvb/frontends/nxt6000.c .
Do I only have to add a new *_set_tv_freq() function and change
nxt6000_attach to detect the new tuner?
Thank you
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe
s reported by Arno Wilhelm on April 14. for the
2.4.19-pre6 kernel.
Thanks in advance
Paul
- Original Message -
From: "amen ra" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "Wolfgang Wershofen" <[EMAIL PROTECTED]>
Sent: Saturday, October 26, 2002
Hello,
the problem with the changed video_device stucture
(missing busy field) previously reported by Arno Wilhelm on April 14. for
the 2.4.19-pre6 kernel is now reality in thne RedHat 8.0 release with kernel
2.4.18 :-(
Regards
P.Farre
Has somebody managed to use 0.9.4 drivers for routing the Fazzt streams
in a local network? I have the DVB board on a linux machine on vdr and I
want to make downloads on multicast . What do I need to do that ?
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubs
Is the eutelsat's opensky service still running? I can't use it for
some days anymore.
Paul
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi list,
after switching to vdr-1pre4 I also changed from dvb-9.4 to latest
CVS. But with the new dvb driver just the Nova card gets
activated. The Haupauge dvb (old rev.) not.
(message: 1 dvb(s) found instead of 2)
Did anything changed within the new dvb driver ???
--
Info:
To unsubscribe s
Hi,
Are there any specs available for the STV0299 demodulator (which is part
of the BSRU6-502A DVB tuner in the latest winTV NOVA cards).
I just want to monitor FE_READ_BER, FE_READ_SIGNAL_STRENGTH, FE_READ_SNR
and FE_READ_UNCORRECTED_BLOCKS from the frontend device (some extra read
ioctl's n
can't reboot the receiver remotely which makes him unusable!
How can we further investigate this problem. Don't hesitate to ask
additional information.
> > > }-Original Message-
> > >From: [EMAIL PROTECTED]
> > >[mailto:[EMAIL PROTECTED]]On
Original Message
Subject: "Resource temporarily unavailable" with latest CVS driver
Date: Tue, 08 Jan 2002 21:47:11 +0100
From: Paul Adriaenssens <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED], Ralph Metzler <[EMAIL PROTECTED]>,
Jon Folland <[EMAIL
ith "ntuxzap -c"
or "szap -n" to avoid long uptime problems?
Can we get more logging from the dvb API to get more details about the
reason for this problem?
We are using siemens_dvb-0.9.3 and Linux 2.4.9-13.
Thanks,
Paul
> Original Message
>
ith "ntuxzap -c"
or "szap -n" to avoid long uptime problems?
Can we get more logging from the dvb API to get more details about the
reason for this problem?
We are using siemens_dvb-0.9.3 and Linux 2.4.9-13.
Thanks,
Paul
Original Message
Subject: [linux-dv
te them via the eth0 interface to
machines behind my dvb receiver machine.
- which mrouted version + patch should be used?
- which entries should be configured in mrouted.conf?
- for which multicast address? (ifconfig -a dvb0_0)
- other important settings?
Thank you
Paul Adriaenssens
--
Info:
T
control the signal strength (or
signal/data lock, or Bit Error Rate) under linux. I can use both of the
Hauppauge cards, DVB-S or NOVA.
Thank you,
Paul Adriaenssens
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
1 - 100 of 108 matches
Mail list logo
