Hi Junko-san,
I looked at your patch, but shouldn't the dump_dir attribute be
referenced as $OCF_RESKEY... ?
Thanks,
Dejan
On Mon, Mar 16, 2009 at 07:22:02PM +0900, Junko IKEDA wrote:
Hi,
I run the new xen0 on domU now,
and need an additional feature for a dump destination.
I have
It should not since xen0 isn't an OCF RA but Stonith external plugin.
On Wed, Mar 18, 2009 at 9:50 AM, Dejan Muhamedagic deja...@fastmail.fm wrote:
Hi Junko-san,
I looked at your patch, but shouldn't the dump_dir attribute be
referenced as $OCF_RESKEY... ?
Thanks,
Dejan
On Mon, Mar 16,
Hi Serge,
On Wed, Mar 18, 2009 at 10:15:44AM -0600, Serge Dubrouski wrote:
It should not since xen0 isn't an OCF RA but Stonith external plugin.
Oops. I'll include the patch then.
Thanks,
Dejan
___
Linux-HA-Dev:
Hi,
On Mon, Mar 16, 2009 at 07:22:02PM +0900, Junko IKEDA wrote:
Hi,
I run the new xen0 on domU now,
and need an additional feature for a dump destination.
I have RHEL5.2 x86_64 and xen 3.1.
This would dump the core file into /var/lib/xen/dump as default.
Ex.)
# ls -lh
Hi Dejan, Serge,
Thank you for your following up!
Regards,
Junko
-Original Message-
From: linux-ha-dev-boun...@lists.linux-ha.org
[mailto:linux-ha-dev-boun...@lists.linux-ha.org] On Behalf Of Dejan
Muhamedagic
Sent: Thursday, March 19, 2009 4:56 AM
To: High-Availability Linux
Hello All,
I made an OCF RA for syslog-ng and attached it to this message.
I confirmed that it can work with no problem in the following cases.
* Creating a resource instance
- This RA can invoke a new syslog-ng process as an OCF resource
with starting Heartbeat. This works independently
Hi,
where can I find information about the latest DTD. I am especially interested
in information about the crm_config section.
The two sources of information I found were:
http://hg.clusterlabs.org/pacemaker/dev/file/tip/xml/crm-1.0.dtd
http://www.linux-ha.org/ciblint/crm_config
which somehow
Hi,
As far as I know pingnodes have to be configured in heartbeat. heartbeat pings
the nodes and updates the CIB.
Where can I configure pingnodes, when I use OpenAIS as the cluster stack?
Thanks.
--
Dr. Michael Schwartzkopff
MultiNET Services GmbH
Addresse: Bretonischer Ring 7; 85630
Michael Schwartzkopff wrote:
Hi,
As far as I know pingnodes have to be configured in heartbeat. heartbeat
pings
the nodes and updates the CIB.
Where can I configure pingnodes, when I use OpenAIS as the cluster stack?
Create a pingd clone resource in the CIB. It's the preferred way of
Do you still really need heartbeat v1???
There are some advanced SAP Resource-Agents for heartbeat v2, which
also include monitoring and service restarts.
The problem with your own(?) RA is it could damage your data, if the
unmounts are not work properly (failing due to open files). This could
Hi Fabian,
no, I don't need v1. You mean v2 has SAP Agents? Oh, I think I have to set
up a test cluster with v2-Style and the rpms from
http://download.opensuse.org/repositories/server:/ha-clustering/SLES_10.
Thank you for the Information.
Gruß
Andreas Reschke
On Tue, Mar 17, 2009 at 16:10, Nicholas Dronen ndro...@gmail.com wrote:
Hi:
I'm writing scripts to dynamically add, remove, manage, and unmanage
resources from the CIB. We already have scripts that start and stop
heartbeat. What I'm doing is updating our code so we can use V2. To
add
On Tue, Mar 17, 2009 at 21:30, lllact...@gmx.net lllact...@gmx.net wrote:
Andrew Beekhof wrote:
And where is the SLE-11-HAE to be found? Looked at opensues.org,
linux-ha.org, clusterlabs.org and Novell.com; or has it something
to do with Novell's PlateSpin Orchestrate 2.0 High
On Wed, Mar 18, 2009 at 02:33, Junko IKEDA ike...@intellilink.co.jp wrote:
I found the following stonithd behavior.
It might be an expected one, but I'm just wondering.
My operation is here;
(1) start Heartbeat 2.1.4 on two nodes(dom-d1, dom-2).
(2) start the resource on active
On Wed, Mar 18, 2009 at 07:27, Michael Schwartzkopff mi...@multinet.de wrote:
Hi,
where can I find information about the latest DTD. I am especially interested
in information about the crm_config section.
The two sources of information I found were:
Thanks boyack. But this still didn't work. After I run this script, I checked
the routing table, the column device is still 0, I think it should be 0:0, is
that correct?
Date: Tue, 10 Mar 2009 19:51:53 -0600
From: t...@nrel.colostate.edu
To: linux-ha@lists.linux-ha.org
Subject: Re:
2009/3/17 lllact...@gmx.net lllact...@gmx.net:
Andrew Beekhof wrote:
On Tue, Mar 17, 2009 at 18:17, Ciro Iriarte cyru...@gmail.com wrote:
2009/3/17 lllact...@gmx.net lllact...@gmx.net:
I have installed SLES 11 RC4. There are no packages for openAIS on the
DVD, neither any sign of
you can use ip route with src parameter to effect source ip of
interface.
you could add higher metric default route, or change the default.
Alternatively you can set $APPLICATION to bind to the floating IP,
presumign it starts after the IP is bound.
Trent
On 18/03/2009, at 10:40 PM,
Ciro Iriarte wrote:
2009/3/17 lllact...@gmx.net lllact...@gmx.net:
Andrew Beekhof wrote:
On Tue, Mar 17, 2009 at 18:17, Ciro Iriarte cyru...@gmail.com wrote:
2009/3/17 lllact...@gmx.net lllact...@gmx.net:
I have installed SLES 11 RC4. There are no
Hi,
Anybody using the following stonith plugins:
cyclades
drac3
nw_rpc100s
rcd_serial
rps10
wti_nps
If so, what's your experience with them?
Cheers,
Dejan
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
I think Trent just supplied a great piece of this puzzle! I wasn't aware
of the 'ip' command. You are right that both before and after running
that script, something like 'netstat -rn' will show a default route
going out eth0, and not show you anything regarding 0:0. I thought it
should too, but
On Wed, Mar 18, 2009 at 00:18, Patrick LeBoutillier
patrick.leboutill...@gmail.com wrote:
Hi,
I'd like to run multiple independant instances of heartbeat on some hosts.
After looking at the source, it seems the path to the config dir is hardcoded.
Is there are way to do this?
possibly in a
Hi,
On Tue, Mar 17, 2009 at 11:56:04AM +0530, Arun G wrote:
Hi,
I observed below error message when I upgraded drbd to drbd-8.3.0 in
heartbeat 2.1.4 cluster on 2.6.18-8.el5xen.
crmd[4242]: 2009/03/16_06:38:17 info: do_lrm_rsc_op: Performing
op=resource_drbd:0_start_0
i set up the example apache cluster of document
http://www.clusterlabs.org/wiki/DRBD_HowTo_1.0
but used mysql server instead of apache server. crm of my test cluster
looks like this:
node $id=8df8447f-6ecf-41a7-a131-c89fd59a120d lenny1
node $id=f13aff7b-6c94-43ac-9a24-b118e62d5325 lenny2
Dejan Muhamedagic wrote:
Hi,
On Tue, Mar 17, 2009 at 11:56:04AM +0530, Arun G wrote:
Hi,
I observed below error message when I upgraded drbd to drbd-8.3.0 in
heartbeat 2.1.4 cluster on 2.6.18-8.el5xen.
-- snip --
Thanks for the patch. But do all supported drbd versions have the
role
No, only 8.3 has the change. 8.2 supports the old state argument, but
typo: this should have read: 8.3 supports the old state argument..
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See
Am Mittwoch, 18. März 2009 10:56:49 schrieb Andrew Beekhof:
On Wed, Mar 18, 2009 at 07:27, Michael Schwartzkopff mi...@multinet.de
wrote:
Hi,
where can I find information about the latest DTD. I am especially
interested in information about the crm_config section.
The two sources of
You won't need any iLO license for just power control. I'm quite sure
about that.
--binghe
On 2009-3-11, at 20:23, Adrian Chapela wrote:
One more time.
I have decided to use external/riloe as my stonith device but I have
some doubts. My system will be a cluster of two nodes.
First, Do
HI,
I'd like to run multiple independant instances of heartbeat on some hosts.
After looking at the source, it seems the path to the config dir is
hardcoded.
why do you think you need to do this? it may be that it's not needed with
the newer (2.x) versions of heartbeat.
Here's what I'm
29 matches
Mail list logo