Hi,
I have been able to setup Linux HA tested and successfully running it.
Couple of questions
1) I have configured the Virtual IP as a alias to the eth0 on the primary
node. is that correct ?
2) I am stuck with adding resources in my setup. I have referred to the
linux-ha.org website too. But I a
I am trying to install Oracle 11g on Linux HA but there is no document to guide
us in Linux cluster configurations.
Please if you can give a link to this i will appreciate it.
Thanks
Femi
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
htt
Hi all,
I'm having difficulties in understanding the full power of linux-ha v2 xml.
Is there any good book about it?
Or is it possible if someone can guide me for some $?
Thank you very much.
--
Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial
http://linux2.arinet.org
11:15am up 8:34, 2
Hello,
We are planning to have a ha for our solution with linux-ha. we need to have
ip address takeover and mac address takeover.
our solution makes use of 1 WAN(eth0) and 1 LAN-eth1 (and also virtual
eth1:1) for its purpose. Since both the nics will be used up, planning to
use the serial port fo
Am Dienstag, 28. April 2009 18:52:27 schrieb Kaushal Shriyan:
> Hi,
>
> I have been able to setup Linux HA tested and successfully running it.
> Couple of questions
> 1) I have configured the Virtual IP as a alias to the eth0 on the primary
> node. is that correct ?
> 2) I am stuck with adding reso
Fajar Priyanto wrote:
> Hi all,
> I'm having difficulties in understanding the full power of linux-ha v2 xml.
Trust me, you're not alone!
> Is there any good book about it?
> Or is it possible if someone can guide me for some $?
> Thank you very much.
There are people who provide consulting on
On Saturday 14 April 2007 12:45, Alan Robertson wrote:
> > Is there any good book about it?
> > Or is it possible if someone can guide me for some $?
> > Thank you very much.
>
> There are people who provide consulting on release 2, and some that
> offer training. But, there are not yet any books,
Fajar Priyanto wrote:
> On Saturday 14 April 2007 12:45, Alan Robertson wrote:
>>> Is there any good book about it?
>>> Or is it possible if someone can guide me for some $?
>>> Thank you very much.
>> There are people who provide consulting on release 2, and some that
>> offer training. But, ther
Hello all,
I am new to Linux-HA and trying to assess whether or not it will suit our
needs. After searching the mailing list archive, I could not find a thread
that was totally relevant, except one that had not been answered. I am
trying to find an IP failover solution for our 'active-active' apac
Hi all,
We in the implementation of heartbeat with squid. we done the script for
starting squid during heartbeat takeover. But when the service (squid in
this case) is stopped, the heartbeat will not takeover. I saw that there
are some resource monitoring solutions are available, but i don't k
After more than 10 years as the Linux-HA project leader, I've decided to
create a new leadership structure.
One of my original success criteria for the project was that it eventually
would not need me. In the last few years, it has seemed more and more
likely that we'd reached this plateau of
Hello list members,
I have a bunch of servers running Linux HA 2.1.3 using a simple version
1 configuration with a 2 node cluster with a shared IP address managed
using the IPaddr2 resource script.
I was wondering if it is possible to perform a live upgrade to a version
2 CRM-based configuration,
Hi all,
while reading michaels book i was wondering if there is a complete treeview
abailable for the ha mib? I have looked that the file itself but it did not
help. How do I get from LHALiveNodeCount to .1.2.0. I guess snmpwalk is used
for that but sill it gives me
LINUX-HA-MIB::LHALiveNodeCount
Dear list members,
at the moment I try to setup a linux cluster of 2 firewalls that should
both be online and only one should run virtual ip addresses of all
network segments.
My configuration looks like the following:
master fw is linux (uname) and slave is idefix. I generated a
resource
Hello,
We are planning to have a ha for our solution with linux-ha. we need to
have ip address takeover and mac address takeover.
our solution makes use of 1 WAN(eth0) and 1 LAN-eth1 (and also virtual
eth1:1) for its purpose. Since both the nics will be used up, planning
to use the serial port for
Hi,
Hi,
as far as I understood, Linux-HA / pacemaker should also compile on a non-
Linux OS. Does it compile under OpenSolaris? Any experience? Is this code
still working?
Thanks.
--
Dr. Michael Schwartzkopff
MultiNET Services GmbH
Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany
Tel:
Hi All
I am attempting to get a DRBD 2 node active passive cluster up and running
as a proof of concept in the job with the plan to remove some win systems,
as a result I have to have everything GUI based for the other admins who
are all win based.
I have been trying to get the Linux HA M
Hi,
I work in a large organization in Israel and currently we are examining
a z/Linux environment implementing Heartbeat as a High Availability
solution.
Since we are talking about a large scale organization we need an
official support for this product.
We contacted IBM Israel to check a possible
Hi -
I am looking for the source of LINUX-HA-MIB and an implementation of it.
Is the implementation of the mandatory groups included in linux ha binary
distribution?
Thanks,
/U
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-h
Hi All,
May i know the license of Linux-Ha. based on the page it is under GPL or LGPL.
but what is the version number?
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also: http://li
Hi All,
Hope everyone is well.
I am having a problem with my test cluster in that it keeps starting up with
Linux-HA without quorum. I've cleared all cib information but still the same
thing.
Any help would be appreciated. I am using the hb_gui
Thanks
--
Timothy Carr
Technical Specialist
Univ
Hi All,
I have configured the resource stickiness attribute for a simgle resource
which has not been added to a group and this works 100%. I then recreated
the resource under a group, applied the stickiness to the group but when a
node boots up and joins the cluster it shuts down the resource and
Hi,
I'm newbie in Linux HA. I want to configure Linux HA with MySQL using
heartbeat version 2. Kindly provide me some links so I can configure it.
--
Regards,
Ahmed Munir
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org
Am Mittwoch, 12. September 2007 01:31 schrieb Jordan Mendler:
> Hello all,
>
> I am new to Linux-HA and trying to assess whether or not it will suit our
> needs. After searching the mailing list archive, I could not find a thread
> that was totally relevant, except one that had not been answered. I
I saw that. Can linux-ha do that with multiple servers/IP addresses, say 5
or 10? I know v2 is supposed to add support for more than 2 IPs, but not
sure if it applies to this type of config.
Thanks<
Jordan
On 9/11/07, Michael Schwartzkopff <[EMAIL PROTECTED]> wrote:
>
> Am Mittwoch, 12. September
On 9/12/07, Jordan Mendler <[EMAIL PROTECTED]> wrote:
> I saw that. Can linux-ha do that with multiple servers/IP addresses, say 5
> or 10? I know v2 is supposed to add support for more than 2 IPs, but not
> sure if it applies to this type of config.
it does
just add more nodes and more resources
On 9/12/07, Jordan Mendler <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> I am new to Linux-HA and trying to assess whether or not it will suit our
> needs. After searching the mailing list archive, I could not find a thread
> that was totally relevant, except one that had not been answered. I am
> tr
Hallo,
> We in the implementation of heartbeat with squid. we done the script for
> starting squid during heartbeat takeover. But when the service (squid in
> this case) is stopped, the heartbeat will not takeover. I saw that there
> are some resource monitoring solutions are available, but i d
Hello Thomas,
Thanks for your help..
I'm using HA-2 only.
but i have to know which files to be modified.. and where to place the
cradmin script. I just workout with apache first., but if i append your
script in the init file, it's not working.
please tell me what are the files to be modifie
Hello,
> the only thing i have to know is that the CIB file configuration. (where to
> place that xml file)
you load the configuration into the cluster manager using the following
command. After that it gets replicated using heartbeat infrastructure to
the other nodes.
cibadmin -U -x /p
Am Donnerstag, 3. Januar 2008 11:28 schrieb Jayaprakash:
> Hello Thomas,
>
> Thanks for your help..
>
> I'm using HA-2 only.
Did you read
http://www.linux-ha.org/GettingStartedV2
> but i have to know which files to be modified.. and where to place the
> cradmin script. I just workout with apache
Hi Michael and all,
Thanks for the detailed explanation you gave.
Now only i got some basic information for the resource monitoring. I
explain my scenario below. Please tell me the possible way to configure
the Linux-HA.
Heartbeat version used : 2.1.2
Setup:
---
I Configured 2 servers w
Hello again,
> haresources
>
> squid-1.mydomain.com 192.168.1.100 squid
delete this file. This file is for ha-1. It works in ha-2, too. But it
doesn't monitor your ressources. If you want to monitor your ressources
you have to use the xml format. Take the xml section I posted earlier
Hello again,
so here is step by step guide. I just did it to stay in training. I used
Debian etch:
On both nodes:
/etc/init.d/heartbeat stop
rm /var/lib/heartbeat/crm/* (Don't do this in production it
wipes your c
Hi Thomas,
Thanks a lot for the detailed description.
i start to configure it now and i revert you if i have any more doubts.
i think this is much enough :-)
Thanks,
Jayaprakash S
Thomas Glanzmann wrote:
Hello again,
so here is step by step guide. I just did it to stay in training. I used
D
Hello Thomas,
I configured the 2 machines using the steps you provided.
and tested it.. in the first step it is ok. But it give some errors
while running cibadmin.
~~
#crm_mod -1 -r
Last updated: Fri Jan 4 10:37:18 20
Hello Jayaprakash,
> I Place the new script in
> /usr/lib/ocf/resource.d/heartbeat/.ocf-shellfuncs and execute the
> following commands.
hopefully you did not but from the output I can tell that you didn't.
You put it where it belongs.
> If possible come to online, we discuss in detailed.. My id
Heoo Jayaprakash,
> I execute these commands in both the machines in the stop state of
> heartbeat
> One more doubt please, i have to just copy the squid ocf file to
> /usr/lib/ocf/resource.d/heartbeat/squid alone or have to append the
> squid init script file and the ocf script file to
> /usr/li
Hello Jayaprakash,
[ RESEND: Forgot to attach the verbose version of the ocf agent ]
> I execute these commands in both the machines in the stop state of
> heartbeat
> One more doubt please, i have to just copy the squid ocf file to
> /usr/lib/ocf/resource.d/heartbeat/squid alone or have to a
Hello Thomas,
Sure
I execute these commands in both the machines in the stop state of heartbeat
One more doubt please, i have to just copy the squid ocf file to
/usr/lib/ocf/resource.d/heartbeat/squid alone
or have to append the squid init script file and the ocf script file to
/usr/lib/ocf
Hello Jayaprakash,
could you please provide the output of the following commands in that
order. Get sure that you stop heartbeat on both machines before you
start:
ls -al /etc/init.d/squid
ls -al /usr/lib/ocf/resource.d/heartbeat/squid
/usr/lib/ocf/resource.d/heartbeat/squ
Hi Thomas,
I Place the new script in
/usr/lib/ocf/resource.d/heartbeat/.ocf-shellfuncs and execute the
following commands.
If possible come to online, we discuss in detailed.. My id
Yahoo/gmail/msn id : jp.aspm
Which Linux Distribution do you use?
I'm using Fedora 7 and Heartbeat Vers
Ok i just play with that tomorow and also run with frdora init script
and tell the result
--JP
Thomas Glanzmann wrote:
Hello,
just to keep the list posted. The problem wasn't the Fedora 7 init
script but a self written init script. 20 E-Mails later the ocf
ressource agent more or less works (t
Hello,
just to keep the list posted. The problem wasn't the Fedora 7 init
script but a self written init script. 20 E-Mails later the ocf
ressource agent more or less works (the monitor actions is still
missing). Hopefully it gets resolved quickly.
Thomas
__
Hello Thomas,
I Tested the apache configuration with heartbeat and it is running now...
So your guess is perfectly correct.
so i plan to modify the fedora's native squid init script and test with
your ocf script.
i keep you posted once i complete that Task.
Thanks,
Jayaprakash S
Thomas Glanz
At my organization, we have been putting a lot of work into Linux-HA
implementation. I have even wrote an OCF Resource Agent for exporting
NFS shares using exportfs.
I have 2 concerns with Linux-HA
1. I heard that Linux-HA is moving away from resource groups. To me
this doesn't seem to make sense
I have a 2 node, active/passive DRBD/HA setup using Redhat ES5, fully
patched.
One of my clients is running a process that needs to create a .lck file.
According to everything I've read, I should be able to setup the
/etc/hosts.allow file with the IP addresses of my nfs clients, and lockd
should
Hello list readers!
[EMAIL PROTECTED] wrote on 24.06.2008 15:26:47:
> After more than 10 years as the Linux-HA project leader, I've decided to
> create a new leadership structure.
...
> These people are: Keisuke MORI <[EMAIL PROTECTED]>
> Dave Blaschke <[EMAIL PROTECTED]>
>
Hi Alan,
THANK YOU VERY MUCH FOR YOUR GREAT WORK !
GOOD LUCK !
Nikita Michalko
Am Dienstag, 24. Juni 2008 15:26 schrieb Alan Robertson:
> After more than 10 years as the Linux-HA project leader, I've decided to
> create a new leadership structure.
>
> One of my original success criteria for
On Wed, Jul 9, 2008 at 22:54, Eric Blau <[EMAIL PROTECTED]> wrote:
> Hello list members,
>
> I have a bunch of servers running Linux HA 2.1.3 using a simple version
> 1 configuration with a 2 node cluster with a shared IP address managed
> using the IPaddr2 resource script.
>
> I was wondering if i
Ehlers, Kolja schrieb:
> Hi all,
>
> while reading michaels book i was wondering if there is a complete treeview
> abailable for the ha mib?
Thanks. I hope you also bought it ;-)
> I have looked that the file itself but it did not
> help. How do I get from LHALiveNodeCount to .1.2.0. I guess snm
Michael Schwartzkopff schrieb:
> Ehlers, Kolja schrieb:
>> Hi all,
>>
>(...)
> is defined a enterprises 4682, which is .1.2.5.1.4.1. Putting all
Sorry, wrong keys where I pressed the keyboard. enterprises is, of
course, 1.3.6.1.4.1
(...)
Michael.
___
L
I apologize in advance for the top posting and the horrible web based
e-mail I'm on the road.
I wrote a whitepaper/book about building Internet firewalls using Linux based
systems, and have been keeping it up until relatively recently. It includes a
chapter on using Heartbeat in order to
Hi Christof,
could you send me your last hb_report and a copy of your whitepaper in
DOC-Format ? I will take a look ...
Thanks !
Nikita Michalko
Am Donnerstag, 7. August 2008 17:26 schrieb [EMAIL PROTECTED]:
> I apologize in advance for the top posting and the horrible web based
> e-mail...
Am Mittwoch, 13. August 2008 13:23 schrieb Nikita Michalko:
> Hi Christof,
>
> could you send me your last hb_report and a copy of your whitepaper in
> DOC-Format ? I will take a look ...
>
>
> Thanks !
>
> Nikita Michalko
>
> >
> > I wrote a whitepaper/book about building Internet firewalls using
Hi Christof
could you send me a copy of your whitepaper in pdf-format??
Thanks in advance.
On Wed, Aug 13, 2008 at 1:29 PM, Michael Schwartzkopff <[EMAIL PROTECTED]>wrote:
> Am Mittwoch, 13. August 2008 13:23 schrieb Nikita Michalko:
> > Hi Christof,
> >
> > could you send me your last hb_repo
Hello Cristof,
I am working on a similar solution. Could you send me a copy of your
whitepaper ? I like to take a look about it.
Thank you!
Hi Christof
could you send me a copy of your whitepaper in pdf-format??
Thanks in advance.
On Wed, Aug 13, 2008 at 1:29 PM, Michael Schwartzko
,
Best regards,
Nicolas.
2008/8/28 Fernando Iglesias <[EMAIL PROTECTED]>
>
>
> -- Forwarded message --
> From: Adrian Chapela <[EMAIL PROTECTED]>
> Date: Thu, Aug 14, 2008 at 1:24 PM
> Subject: Re: [Linux-HA] Linux-ha for firewalls
> To: General L
Nagaraja, Madhukar (Madhukar) wrote:
> Hello,
> We are planning to have a ha for our solution with linux-ha. we need to
> have ip address takeover and mac address takeover.
>
> our solution makes use of 1 WAN(eth0) and 1 LAN-eth1 (and also virtual
> eth1:1) for its purpose. Since both the nics wil
active, the ip address
of the active has to be used by passive.
I will do more investigations and back with more querries :-)
Thanks.
--
Message: 5
Date: Wed, 26 Nov 2008 11:26:14 +0100
From: Luis Motta Campos <[EMAIL PROTECTED]>
Subject: Re: [Linux-HA] Linux HA config qu
Nagaraja, Madhukar (Madhukar) wrote:
> Hello luis motta campos,
>
> Well I did not completely misunderstand.
> And your response cleared my understanding.
>
> Basically, I want all the eth interfaces to be part of the ha
> clustering. Bcos we the need the same ip addresses on both the active
> an
Hi,
On Thu, Nov 27, 2008 at 10:45:30AM +0100, Luis Motta Campos wrote:
> Nagaraja, Madhukar (Madhukar) wrote:
> > Hello luis motta campos,
> >
> > Well I did not completely misunderstand.
> > And your response cleared my understanding.
> >
> > Basically, I want all the eth interfaces to be part
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
Happy New Year 2009! :)
I've been using linux-ha for quite sometime now.
- From various tutorials and docs I manage to setup a 2-node hearbeat and
drbd. However, I'd like to know more.
Is there any comprehensive books about linux-ha?
And.. to A
On Tue, 20 Jan 2009, Michael Schwartzkopff wrote:
as far as I understood, Linux-HA / pacemaker should also compile on a non-
Linux OS. Does it compile under OpenSolaris? Any experience? Is this code
still working?
(Apologies for the delay...)
I think there might be bigger questions of princip
On Mon, Jan 26, 2009 at 18:11, David Lee wrote:
> On Tue, 20 Jan 2009, Michael Schwartzkopff wrote:
>
>> as far as I understood, Linux-HA / pacemaker should also compile on a non-
>> Linux OS. Does it compile under OpenSolaris? Any experience? Is this code
>> still working?
>
> (Apologies for the
David Lee schrieb:
On Tue, 20 Jan 2009, Michael Schwartzkopff wrote:
as far as I understood, Linux-HA / pacemaker should also compile on a
non-
Linux OS. Does it compile under OpenSolaris? Any experience? Is this
code
still working?
(Apologies for the delay...)
I think there might be bigge
Hi, Andrew. Thanks for the reply. Hope you are well.
On Mon, 26 Jan 2009, Andrew Beekhof wrote:
On Mon, Jan 26, 2009 at 18:11, David Lee wrote:
[...]
My guess (but it is
just a guess) is that pacemaker probably no longer builds on non-Linux
machines. Can anyone confirm/refute this?
If
On Tue, Jan 27, 2009 at 11:44, David Lee wrote:
>
>>> I've no idea whether there is any compatibility overlap between pacemaker
>>> and OHAC. I suspect, sadly, that there might not be (i.e. that the
>>> clustering world has split into two (or more) parts).
>>
>> Exactly what kind of split are yo
Try Novell, they support it in their SUSE Linux Enterprise Server
Cheers,
Sander
Alik Hochner schreef:
Hi,
I work in a large organization in Israel and currently we are examining
a z/Linux environment implementing Heartbeat as a High Availability
solution.
Since we are talking about a large s
Am Mittwoch, 11. Februar 2009 13:16:35 schrieb Alik Hochner:
> Hi,
>
> I work in a large organization in Israel and currently we are examining
> a z/Linux environment implementing Heartbeat as a High Availability
> solution.
> Since we are talking about a large scale organization we need an
> offic
Am Donnerstag, 12. Februar 2009 20:51:52 schrieb uma...@comcast.net:
> Hi -
>
> I am looking for the source of LINUX-HA-MIB and an implementation of it.
> Is the implementation of the mandatory groups included in linux ha binary
> distribution?
>
> Thanks,
>
> /U
No, since the softeware is a Agen
Hello..
Thanks for your response. I am looking for the MIB definition file.
Where do I download it off?
Vielen Dank,
/U
- Original Message -
From: Michael Schwartzkopff
To: General Linux-HA mailing list
Sent: Fri, 13 Feb 2009 13:17:31 + (UTC)
Subject: Re: [Linux-HA] LINUX-HA-MIB
Am Samstag, 14. Februar 2009 08:23:16 schrieb uma...@comcast.net:
> Hello..
>
> Thanks for your response. I am looking for the MIB definition file.
> Where do I download it off?
>
> Vielen Dank,
>
> /U
After installtion: /usr/share/snmp/mibs
Sourcecode: In deirectory snmp_subagent of pacemace-pyg
Hi all, i'm using Alan Robertson linux-ha script for DB2.
A few days ago, our database team has migrated their version of DB2 from 9.1
to 9.5 and now the script fails to startup the database.
I think the troubles are at lines 247/248 of db2 script:
pscount=`runasdb2 $db2bin/db2_local_ps | cut -c
Am Dienstag, 25. August 2009 10:27:40 schrieb Timothy Carr:
> Hi All,
>
> Hope everyone is well.
>
> I am having a problem with my test cluster in that it keeps starting up
> with Linux-HA without quorum. I've cleared all cib information but still
> the same thing.
> Any help would be appreciated.
Hi
Its a 2 node test cluster running HA 2.1.4 on SLES 10SP2 . I am not sure
what you mean by "expected-votes attribute"
Tim
On Tue, Aug 25, 2009 at 10:42 AM, Michael Schwartzkopff
wrote:
> Am Dienstag, 25. August 2009 10:27:40 schrieb Timothy Carr:
> > Hi All,
> >
> > Hope everyone is well.
>
Am Dienstag, 25. August 2009 10:49:32 schrieb Timothy Carr:
> Hi
>
> Its a 2 node test cluster running HA 2.1.4 on SLES 10SP2 . I am not sure
> what you mean by "expected-votes attribute"
>
> Tim
Ok. 2.1.4 does not have this attribute.
But then I am out of my guesses. Sorry. Cannot help you furthe
Hi
I figured out the problem.
I deleted the node information using cibadmin -D -X '' to remove the lightbulb machines. I suspect it could
not calculate the quorum because of those additional uname -n entries.
I then deleted the /var/lib/heartbeat/hostcache file and restarted
heartbeat. Working n
On Tue, Aug 25, 2009 at 11:18 AM, Timothy
Carr wrote:
> Hi
>
> I figured out the problem.
>
> I deleted the node information using cibadmin -D -X ' uname="node-name"/>' to remove the lightbulb machines. I suspect it could
> not calculate the quorum because of those additional uname -n entries.
>
>
It stays on the same node ..
tim
On Wed, Aug 26, 2009 at 3:21 PM, Andrew Beekhof wrote:
> On Wed, Aug 26, 2009 at 2:02 PM, Timothy
> Carr wrote:
> > Hi All,
> >
> > I have configured the resource stickiness attribute for a simgle resource
> > which has not been added to a group and this works
On Wed, Aug 26, 2009 at 3:24 PM, Timothy
Carr wrote:
> It stays on the same node ..
Can you _attach_ the logs from that node?
What version is this?
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
On Wed, Aug 26, 2009 at 2:02 PM, Timothy
Carr wrote:
> Hi All,
>
> I have configured the resource stickiness attribute for a simgle resource
> which has not been added to a group and this works 100%. I then recreated
> the resource under a group, applied the stickiness to the group but when a
> nod
I've managed to resolve the issue with the resource stickiness problem.
What was happening was that the linux systems was not deactivating the LV's
when booting up. I disabled boot.lvm from the /etc/init.d scripts on both
hosts and got linux HA to do the activation via its OCF resource agents.
Th
On Thu, Aug 27, 2009 at 9:59 AM, Timothy
Carr wrote:
> I've managed to resolve the issue with the resource stickiness problem.
>
> What was happening was that the linux systems was not deactivating the LV's
> when booting up. I disabled boot.lvm from the /etc/init.d scripts on both
> hosts and got
Hi Ahmed,
You need to first look at what you would like to achieve with Linux HA and
what you have to provide for Linux HA
Some of the things you need to consider are listed below
1. Will you have a shared disk system presented to your HA nodes ?
2. Will you be using LVM for your disks ?
3. You w
6, 2009 at 12:00 AM, wrote:
>
>
> Date: Fri, 25 Sep 2009 18:32:52 +0200
> From: Timothy Carr
> Subject: Re: [Linux-HA] Linux HA for MYSQL
> To: General Linux-HA mailing list
> Message-ID:
>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi Ahmed,
>
&
using heartbeat version 2.
>
> Kindly help me up in this problem.
>
> On Sat, Sep 26, 2009 at 12:00 AM, wrote:
>
> >
> >
> > Date: Fri, 25 Sep 2009 18:32:52 +0200
> > From: Timothy Carr
> > Subject: Re: [Linux-HA] Linux HA for MYSQL
> > To: General L
Hi,
I am really interested in getting Linux HA working on a Solaris 10 SPARC
zone. I have downloaded Heartbeat-STABLE-2-1-STABLE-2.1.4 and executed
as root ./ConfigureMe configure and got a long list of output ending in
the following:
configure: WARNING: The following recommended components n
Hi All,
I have gone through various docs how-to-configure-linux-HA. In every doc
this is written that you should have two NIC or one NIC + Null Modem Cable.
one NIC will be used for Service and Second NIC used for Heart-Beat.
Do we really need of second NIC for heart-beat. Can't we use main NIC f
I am having an issue with getting my linux-ha to work. I use crm_mon
to see whats going on and i see a message:
Not connected: Refresh 1s
I also checked the permissions of my ha.cf, authkeys, and cib.xml
files. They look fine.
Also, when i do a "service heartbeat restart", everything says ok.
Hello to all my wonderful friends at Linux-HA, how are
you all today ?
Can anyone confirm the following to be a mistake:
At http://linux-ha.org/OCFResourceAgent
"Writing your own OCF Resource Agent:"
"Actions: Normal OCF Resource Agents are required to
have these actions:
...
. status - test if
Hi,
I've been using RHCS for a while but for a couple of projects I need to
evaluate some other solutions.
I download/installed and configured (for what I could understand)
heartbeat but I'm haveing some problems.
Thank in advance for help.
Goal is to have a two cluster node with an active
hi all,
I've been trying for the last few days to get heartbeat working with a basic
drbd configuration. I was initially using heartbeat 2.0.8, but eventually
upgraded to 2.1.3. the symptoms exhibited by each version of heartbeat were
completely different, so here I'll focus on 2.1.3, as that
On Wed, Mar 26, 2008 at 12:20 AM, Jason Wright <[EMAIL PROTECTED]> wrote:
> At my organization, we have been putting a lot of work into Linux-HA
> implementation. I have even wrote an OCF Resource Agent for exporting
> NFS shares using exportfs.
>
> I have 2 concerns with Linux-HA
>
> 1. I hear
Hi,
this post is a follow up to a discussion on this list beginnig of April.
Does anybody did setup a Linux-HA Cluster on a OpenVZ virtual system? I ran
into trouble using the IPaddr2 resource.
Since a OpenVZ virtual machine is not able to set its own IP address the
resource IP for the virtual
Fajar Priyanto schrieb:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
Happy New Year 2009! :)
I've been using linux-ha for quite sometime now.
- From various tutorials and docs I manage to setup a 2-node hearbeat and
drbd. However, I'd like to know more.
Is there any comprehensive books
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Schwartzkopff wrote:
> as far as I know only one book is available. See:
> http://www.oreilly.de/catalog/linuxhaclusterger/
>
> Sorry, it is on German. But if you call O'Reilly or write them an email,
> perhaps they decide to translate it.
>
Fajar Priyanto schrieb:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Schwartzkopff wrote:
as far as I know only one book is available. See:
http://www.oreilly.de/catalog/linuxhaclusterger/
Sorry, it is on German. But if you call O'Reilly or write them an email,
perhaps they decide
On Sat, Jan 3, 2009 at 4:55 AM, Michael Schwartzkopff wrote:
> Fajar Priyanto schrieb:
>
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Michael Schwartzkopff wrote:
>>
>>
>>> as far as I know only one book is available. See:
>>> http://www.oreilly.de/catalog/linuxhaclusterger/
>>>
>>> S
Karl W. Lewis schrieb:
On Sat, Jan 3, 2009 at 4:55 AM, Michael Schwartzkopff wrote:
Fajar Priyanto schrieb:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Schwartzkopff wrote:
as far as I know only one book is available. See:
http://www.oreilly.de/catalog/linuxhaclus
1 - 100 of 168 matches
Mail list logo
