Hi all.
i'm trying to use the above card , and here is what i get:[root@server
/root]# modprobe hisax type=12 protocol=2 irq=11 io=0x0100
ISDN subsystem Rev: 1.55/1.47/1.55/1.33/1.10/1.2 loaded
ISDNLink: IRQ(11) getting no interrupts during init 1
ISDNLink: IRQ(11) getting no interrupts during in
Try cat /proc/interrupts.
CIGAN.
On Sun, 16 May 1999, Alex Dubrovsky wrote:
|Hi all.
|i'm trying to use the above card , and here is what i get:[root@server
|/root]# modprobe hisax type=12 protocol=2 irq=11 io=0x0100
|ISDN subsystem Rev: 1.55/1.47/1.55/1.33/1.10/1.2 loaded
|ISDNLink: IRQ(11) g
On Sat, 15 May 1999, Liran Zvibel wrote:
> I remember reading (In tomshardware, IIRC) that the Rage 128 cards heat to
> something close to 100 degrees. The ATI people said that the cards can handle
> that temperature, but I'm not sure about the rest of my cards, my motherboard
> and the CPU. Do
On Sat, 15 May 1999, Barid Bel Medar wrote:
> I got linux redhat 6.0, running on celeron 266, 64MB ram,
> linux native partition 1.5 GB and linux swap partition 850Mb
woha again ! like it was said here earlier - a 2.2 kernel can handle more
then 128 MB of swap , but Y would you want to do that
> erez katz wrote:
>
> hello.
> I am wish to connect a linux box with a complete installation of
> RedHat6.0 to a NT LAN.
> I searched for a tutorial about it in the web but wasn't i too
> successfull with finding one.
> I would be most appreciative for any help weather links or some
> guidelines
Beginners will also find SWAT useful, RH comes preconfigured
with it. Just browse http://yourhost:901/ and use
your root's password (tsk!). SWAT is a web-based
Samba administration tool.
Boaz Rymland wrote:
>
> > erez katz wrote:
> >
> > hello.
> > I am wish to connect a linux box with a complet
--- Ben Nes Michael <[EMAIL PROTECTED]> wrote:
> Your floppy disk is dead
ok, but what do i do?!
PLEASE!!! help me!
_
Do You Yahoo!?
Free instant messaging and more at http://messenger.yahoo.com
Hi,
Does any one know how can i check if a varible contain any data ,using
sh script.
something like if ($param ne ""){} in perl.
Thanks.
Mike Almogy
Mofet System Administrator.
Pho :972-03-6901417
Cel :972-052-562237
Fax :972-03-6901414
Mike Almogy <[EMAIL PROTECTED]> writes:
> Does any one know how can i check if a varible contain any data ,using
> sh script.
>
> something like if ($param ne ""){} in perl.
man test?
E.g.
if [ "$PARAM" != "" ]
then ...
else ...
fi
or
if [ -z "$PARAM" ]
then ...
else ...
fi
the rookie wrote:
> > Your floppy disk is dead
>
> ok, but what do i do?!
> PLEASE!!! help me!
You can write a new diskette in windows using a utility called RAWRITE and a
linux boot image, which might be found on your Linux CD.
Why were you using floppys anyway? They die a lot.
--
Itamar -
Hello,
I've tried to install Linux Server in the Network with
Novell 3.
But I found that Novell 3 Server is connected to 2 different
HUBs with 2 different Eth. cards.
This way every computer sees Novell 3 Server but PCs on
different Hubs do not see each other.
When I connect together both Hubs, N
hello.
I am wish to connect a linux box with a complete
installation of RedHat6.0 to a NT LAN.
I searched for a tutorial about it in the web but wasn't
i too successfull with finding one.
I would be most appreciative for any help weather links
or some guidelines to get me start with it.
Before you go to vote for politics, vote for Linux!
If you want an English-Hebrew-Engish translation for Linux (native!
not Wine/VMWare/DOSEmu/Twine/FreeMWare/SoftWindows/MainWin/etc.),
browse to the following HTML form:
http://www.babylon.com/heb/support/mac.html
You know what to do...
Eli Marmor <[EMAIL PROTECTED]> wrote:
> http://www.babylon.com/heb/support/mac.html
>
> If you can't read the Hebrew letters
.. then just replace "heb" with "eng" in the URL :)
Regards,
Evgeny
--
/ Evgeny Stambulchik <[E
> > http://www.babylon.com/heb/support/mac.html
> >
> > If you can't read the Hebrew letters
>
> .. then just replace "heb" with "eng" in the URL :)
No, no, no!
The URL I mentioned is for English-Hebrew translation; I'm not sure
the "eng" is for Hebrew too.
In addition, if everybody will se
Eli Marmor <[EMAIL PROTECTED]> wrote:
> > > http://www.babylon.com/heb/support/mac.html
> > >
> > > If you can't read the Hebrew letters
> >
> > .. then just replace "heb" with "eng" in the URL :)
>
> No, no, no!
>
> The URL I mentioned is for English-Hebrew translation; I'm not sur
Evgeny Stambulchik <[EMAIL PROTECTED]> wrote:
>
> Hmm... The source of the form (the Hebrew one) contains:
>
> http://www.babylon.com/redirects/platforms.cgi">
>
> ..
>
>
>
> Unless they count votes based on the referer document, I'm afraid we're
> out
> of luck :-) BTW, the Japa
Hello,
I heard somewhere that KDE has Hebrew support, but
I didn't find any information on their website.
I was wondering what kind of support there is and
how I can take advantage of it?
Any help would be appreciated.
Thanks,
- Oren
On Sun, 16 May 1999, Alex Rier wrote:
AR>HUBs with 2 different Eth. cards.
AR>This way every computer sees Novell 3 Server but PCs on
AR>different Hubs do not see each other.
AR>When I connect together both Hubs, Novell 3 Server gets crazy
AR>saying "...router configuration error detected."
AR>
A
On Sun, 16 May 1999, Oren Shomron wrote:
> I heard somewhere that KDE has Hebrew support, but
> I didn't find any information on their website.
There;s no information about it in their website, nor there is about the
other 30 or so languages that KDE supports.
> I was wondering what kind of sup
20 matches
Mail list logo