After sleeping on this, why can't we change __free_pages_bootmem
to not take an order, but rather nr_pages? If we did that,
then __free_pages_memory could just calculate nr_pages and call
__free_pages_bootmem one time.
I don't see why any of the callers of __free_pages_bootmem would not
easily
Add bit defines for the status register.
Signed-off-by: Wei Ni w...@nvidia.com
---
drivers/hwmon/lm90.c | 72 ++
1 file changed, 49 insertions(+), 23 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 5f30f90..c90037f
Enable thermal sensor nct1008 for t30 cardhu.
Signed-off-by: Wei Ni w...@nvidia.com
---
arch/arm/boot/dts/tegra30-cardhu.dtsi |7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi
b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index f65b53d..e5759ca 100644
Using enums for the indexes and nrs of temp8 and temp11.
This make the code much more readable.
Signed-off-by: Wei Ni w...@nvidia.com
---
drivers/hwmon/lm90.c | 179 --
1 file changed, 114 insertions(+), 65 deletions(-)
diff --git
Enable thermal sensor lm90 for Tegra30 Cardhu and Tegra114 Dalmore.
This series is v2, previous version patches:
[RFC 1/9]: http://thread.gmane.org/gmane.linux.power-management.general/31056
[v1]: http://thread.gmane.org/gmane.linux.ports.tegra/11713/
[v2]:
This patch set enhance the lm90 driver,
it make the driver more readable and easier to use thermal framework.
This series is v2, previous version patches:
[RFC]: http://thread.gmane.org/gmane.linux.power-management.general/31056
[v1]: http://thread.gmane.org/gmane.linux.ports.tegra/11710/
[v2]:
When the temperature exceed the limit range value,
the driver can handle the interrupt.
Signed-off-by: Wei Ni w...@nvidia.com
---
drivers/hwmon/lm90.c | 24
1 file changed, 24 insertions(+)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index
Split setshow temp codes as common functions, so we can use it directly when
implement linux thermal framework.
Signed-off-by: Wei Ni w...@nvidia.com
---
drivers/hwmon/lm90.c | 112 +++---
1 file changed, 69 insertions(+), 43 deletions(-)
diff --git
Enable thermal sensor nct1008 for t114 dalmore.
Signed-off-by: Wei Ni w...@nvidia.com
---
arch/arm/boot/dts/tegra114-dalmore.dts |7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts
b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb640eb..47ec7eb
On 7/11/13 7:13 PM, Mika Westerberg wrote:
On Thu, Jul 11, 2013 at 10:36:00AM +0300, Mika Westerberg wrote:
On Wed, Jul 10, 2013 at 06:56:35PM +0200, Christian Ruppert wrote:
On Wed, Jul 10, 2013 at 01:52:15PM +0300, Mika Westerberg wrote:
On Tue, Jul 09, 2013 at 06:19:28PM +0200, Christian
* Kyungsik Lee kyungsik@lge.com wrote:
LZ4 has been updated with LZ4 Streaming Format specification(v1.3).
lz4demo is replaced by lz4c. lz4c supports both the new streaming and
legacy format with -l option.
This patch makes use of lz4c to support legacy format which is
used for LZ4
On Thu, Jul 11, 2013 at 02:36:38PM -0700, H. Peter Anvin wrote:
On 07/11/2013 02:04 PM, Borislav Petkov wrote:
On Thu, Jul 11, 2013 at 01:53:16PM -0700, H. Peter Anvin wrote:
Has anyone talked to AMD or VIA about this at all?
I guess I can try to take care of the AMD part. Just to
On Fri, Jul 12, 2013 at 09:56:02AM +0200, Ingo Molnar wrote:
If a utility is not widely available yet and if the utility is not in
the kernel proper, could you please at least make sure that randconfig
does not stumble over non-buildable kernels?
Two months ago I've complained about this and
On 2013.07.12 at 10:19 +0800, Ming Lei wrote:
On Mon, Jul 8, 2013 at 6:25 AM, Linda Walsh l...@tlinx.org wrote:
Also am seeing this for the first time:
(don't know, but seems unlikely to be related to
https://patchwork.kernel.org/patch/87359/
Yet it is the only hit I found for the same
Ciao
il mio nome è vera devo dire che scintilla il mio interesse per un buon
partner, mi piacerebbe sapere di più per lo scambio di amore e di amicizia, non
esitate a inviarmi una e-mail attraverso il mio id mail (vera.matine @ yahoo.
com) Please in modo che io vi manderò la mia foto e ti dirà
config: make ARCH=avr32 allyesconfig
drivers/net/usb/r8152.c: In function 'rtl8152_start_xmit':
drivers/net/usb/r8152.c:956: warning: integer overflow in expression
955 memset(tx_desc, 0, sizeof(*tx_desc));
956 tx_desc-opts1 = cpu_to_le32((len TX_LEN_MASK) | TX_FS | TX_LS);
957
drivers/net/usb/r815x.c:38:16: sparse: cast to restricted __le32
drivers/net/usb/r815x.c:67:15: sparse: cast to restricted __le32
drivers/net/usb/r815x.c:69:13: sparse: incorrect type in assignment
(different base types)
drivers/net/usb/r815x.c:69:13:expected unsigned int [unsigned]
* Robin Holt h...@sgi.com wrote:
[...]
With this patch, we did boot a 16TiB machine. Without the patches, the
v3.10 kernel with the same configuration took 407 seconds for
free_all_bootmem. With the patches and operating on 2MiB pages instead
of 1GiB, it took 26 seconds so
On Thu, Jul 11, 2013 at 02:22:14PM -0700, Mark Galeck wrote:
The answer to is it desirable to improve X? is always yes. But
the only way to make progress in Linux is to actually post patches
that improve X. This is unlike many corporate environments, where
you might need to get somebody's
On Fri, Jul 12, 2013 at 04:56:49PM +0900, Shinya Kuribayashi wrote:
On 7/11/13 7:13 PM, Mika Westerberg wrote:
On Thu, Jul 11, 2013 at 10:36:00AM +0300, Mika Westerberg wrote:
On Wed, Jul 10, 2013 at 06:56:35PM +0200, Christian Ruppert wrote:
On Wed, Jul 10, 2013 at 01:52:15PM +0300, Mika
On Fri, Jul 12, 2013 at 10:27:56AM +0200, Ingo Molnar wrote:
Robert Richter and Boris Petkov are working on 'persistent events'
support for perf, which will eventually allow boot time profiling -
I'm not sure if the patches and the tooling support is ready enough
yet for your purposes.
Nope,
Commit-ID: 107de3724eff5a6fa6474a4d2aa5460b63749ebf
Gitweb: http://git.kernel.org/tip/107de3724eff5a6fa6474a4d2aa5460b63749ebf
Author: Robert Richter robert.rich...@linaro.org
AuthorDate: Tue, 11 Jun 2013 17:22:38 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon,
Commit-ID: 761a0f395d5d8b7aafe563ecefbc8cf71a214a91
Gitweb: http://git.kernel.org/tip/761a0f395d5d8b7aafe563ecefbc8cf71a214a91
Author: Robert Richter robert.rich...@calxeda.com
AuthorDate: Mon, 6 May 2013 20:40:14 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon,
Commit-ID: 13966721a11f4a2ba8038191e48083b5f31822bb
Gitweb: http://git.kernel.org/tip/13966721a11f4a2ba8038191e48083b5f31822bb
Author: Kirill A. Shutemov kirill.shute...@linux.intel.com
AuthorDate: Thu, 6 Jun 2013 14:35:03 +0300
Committer: Arnaldo Carvalho de Melo a...@redhat.com
Commit-ID: 756bbc84e30b57ca1010b550ea30594fd0b0494f
Gitweb: http://git.kernel.org/tip/756bbc84e30b57ca1010b550ea30594fd0b0494f
Author: Joonsoo Kim iamjoonsoo@lge.com
AuthorDate: Wed, 19 Jun 2013 10:02:30 +0900
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul
Commit-ID: 0276c22a3f22b7f6696fa07b0a77635726b2c0fd
Gitweb: http://git.kernel.org/tip/0276c22a3f22b7f6696fa07b0a77635726b2c0fd
Author: Jiri Olsa jo...@redhat.com
AuthorDate: Mon, 10 Jun 2013 08:21:21 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul 2013
Commit-ID: d07f0b120642f442d81a61f68a9325fb7717004f
Gitweb: http://git.kernel.org/tip/d07f0b120642f442d81a61f68a9325fb7717004f
Author: Stephane Eranian eran...@google.com
AuthorDate: Tue, 4 Jun 2013 17:44:26 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul
Commit-ID: 4a4d371a4dfbd3b84a7eab8d535d4c7c3647b09e
Gitweb: http://git.kernel.org/tip/4a4d371a4dfbd3b84a7eab8d535d4c7c3647b09e
Author: Jiri Olsa jo...@redhat.com
AuthorDate: Wed, 5 Jun 2013 13:37:21 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul 2013
Commit-ID: 4be8be6b430611def94bcd583b7b302d197a9520
Gitweb: http://git.kernel.org/tip/4be8be6b430611def94bcd583b7b302d197a9520
Author: Adrian Hunter adrian.hun...@intel.com
AuthorDate: Thu, 4 Jul 2013 16:20:24 +0300
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8
Commit-ID: 7cab84e8975cfb8a59ce3e79ce75e5eedd384484
Gitweb: http://git.kernel.org/tip/7cab84e8975cfb8a59ce3e79ce75e5eedd384484
Author: David Ahern dsah...@gmail.com
AuthorDate: Tue, 2 Jul 2013 13:27:20 -0600
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul 2013
Commit-ID: a4147f0f91386540316e468f3a3674a498dada5f
Gitweb: http://git.kernel.org/tip/a4147f0f91386540316e468f3a3674a498dada5f
Author: Robert Richter robert.rich...@calxeda.com
AuthorDate: Wed, 8 May 2013 11:43:34 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon,
Commit-ID: f9ceffb605be7b3b3b2a6e6d14dd0d7a97eae580
Gitweb: http://git.kernel.org/tip/f9ceffb605be7b3b3b2a6e6d14dd0d7a97eae580
Author: Waiman Long waiman.l...@hp.com
AuthorDate: Thu, 9 May 2013 10:42:48 -0400
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul 2013
Commit-ID: 7e40c92019cef784fffbdfc51c6e731e7ee6ba10
Gitweb: http://git.kernel.org/tip/7e40c92019cef784fffbdfc51c6e731e7ee6ba10
Author: Runzhen Wang runz...@linux.vnet.ibm.com
AuthorDate: Fri, 28 Jun 2013 16:14:56 +0800
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon,
Commit-ID: b2c34fde048f3c85ef0716a8cdabbe46ac67d1e6
Gitweb: http://git.kernel.org/tip/b2c34fde048f3c85ef0716a8cdabbe46ac67d1e6
Author: Adrian Hunter adrian.hun...@intel.com
AuthorDate: Thu, 4 Jul 2013 16:20:23 +0300
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8
Hi Jiri,
On Thu, 11 Jul 2013 17:28:28 +0200, Jiri Olsa wrote:
hi,
following up on the 'perf timechart' FIXME note and changing
its tracepoint match not to use event types data.
Original RFC sent here:
http://marc.info/?l=linux-kernelm=137344263513417w=2
v2 changes:
- using tracepoints
Commit-ID: d14c496588733ec1b586ec068932c1db228dd770
Gitweb: http://git.kernel.org/tip/d14c496588733ec1b586ec068932c1db228dd770
Author: Mike Frysinger vap...@chromium.org
AuthorDate: Thu, 9 May 2013 00:17:44 -0400
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Wed, 10 Jul
* Borislav Petkov b...@alien8.de wrote:
On Fri, Jul 12, 2013 at 10:27:56AM +0200, Ingo Molnar wrote:
Robert Richter and Boris Petkov are working on 'persistent events'
support for perf, which will eventually allow boot time profiling -
I'm not sure if the patches and the tooling support
Commit-ID: a363a9da65d253fa7354ce5fd630f4f94df934cc
Gitweb: http://git.kernel.org/tip/a363a9da65d253fa7354ce5fd630f4f94df934cc
Author: Michael Witten mfwit...@gmail.com
AuthorDate: Wed, 17 Apr 2013 02:23:16 +
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Tue, 9 Jul
Commit-ID: 750ade7e82709c2835cb221a7b6a9ef0a6a9c0ac
Gitweb: http://git.kernel.org/tip/750ade7e82709c2835cb221a7b6a9ef0a6a9c0ac
Author: Ramkumar Ramachandra artag...@gmail.com
AuthorDate: Tue, 9 Jul 2013 15:30:30 +0530
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Wed,
Commit-ID: 54bd269205c188967d565f1f5552b13d08ca1be0
Gitweb: http://git.kernel.org/tip/54bd269205c188967d565f1f5552b13d08ca1be0
Author: Adrian Hunter adrian.hun...@intel.com
AuthorDate: Thu, 4 Jul 2013 16:20:34 +0300
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8
Commit-ID: 582ec0829b3dd74d8c0f58403a3f9df8cbaa9c7d
Gitweb: http://git.kernel.org/tip/582ec0829b3dd74d8c0f58403a3f9df8cbaa9c7d
Author: Stephane Eranian eran...@google.com
AuthorDate: Fri, 5 Jul 2013 19:06:45 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul
Commit-ID: 7e0d6fc90fc6f9faea63a2b67233ae767903573c
Gitweb: http://git.kernel.org/tip/7e0d6fc90fc6f9faea63a2b67233ae767903573c
Author: Adrian Hunter adrian.hun...@intel.com
AuthorDate: Thu, 4 Jul 2013 16:20:29 +0300
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8
Commit-ID: bcf3145fbeb1bd91ad2ca67b1946077530f7bfb1
Gitweb: http://git.kernel.org/tip/bcf3145fbeb1bd91ad2ca67b1946077530f7bfb1
Author: Namhyung Kim namhyung@lge.com
AuthorDate: Wed, 26 Jun 2013 16:14:15 +0900
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul
Commit-ID: 079787f209416416383c74ea5d5044be2d586f5e
Gitweb: http://git.kernel.org/tip/079787f209416416383c74ea5d5044be2d586f5e
Author: Joonsoo Kim iamjoonsoo@lge.com
AuthorDate: Wed, 19 Jun 2013 10:02:29 +0900
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul
Added implementation of CRC64 ECMA checksum.
Signed-off-by: Marian Chereji marian.cher...@freescale.com
Reviewed-by: Varvara Andrei-B21317 andrei.varv...@freescale.com
Reviewed-by: Fleming Andrew-AFLEMING aflem...@freescale.com
---
include/linux/crc64_ecma.h | 56 +++
lib/Kconfig
Hi Yann,
Sorry again for the late reply, busy...
Le Monday 08 July 2013 à 19:35 +0200, Yann E. MORIN a écrit :
On 2013-07-08 13:19 +0200, Jean Delvare spake thusly:
This is more concise and easier to grasp, methinks. I don't think the
reference to the user's locale is needed, as there's no
Commit-ID: 563aecb2e63a16f86c7daabfdcfee23f3e7c5955
Gitweb: http://git.kernel.org/tip/563aecb2e63a16f86c7daabfdcfee23f3e7c5955
Author: Jiri Olsa jo...@redhat.com
AuthorDate: Wed, 5 Jun 2013 13:35:06 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon, 8 Jul 2013
Commit-ID: 5125bc22e7871b46e71312d6cc4455e9eea1619d
Gitweb: http://git.kernel.org/tip/5125bc22e7871b46e71312d6cc4455e9eea1619d
Author: Robert Richter robert.rich...@calxeda.com
AuthorDate: Fri, 3 May 2013 15:49:53 +0200
Committer: Arnaldo Carvalho de Melo a...@redhat.com
CommitDate: Mon,
Use the inlined helpers hid_hw_open/close instead of direct calls to
-ll_driver-open() and -ll_driver-close().
Signed-off-by: Benjamin Tissoires benjamin.tissoi...@redhat.com
---
drivers/hid/hid-logitech-dj.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git
From: Srinivas Kandagatla srinivas.kandaga...@st.com
The use case is simple, if any rc device has allowed protocols =
RC_TYPE_LIRC and map_name = RC_MAP_LIRC set, the driver open will be never
called. The reason for this is, all of the key maps except lirc have some
KEYS in there map, so during
Alongside already existing Composite input.
Signed-off-by: Lubomir Rintel lkund...@v3.sk
Cc: Hans Verkuil hans.verk...@cisco.com
Cc: Mauro Carvalho Chehab mche...@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-me...@vger.kernel.org
---
drivers/media/usb/usbtv/usbtv.c | 99
With the Broadcom BCM57765 card reader [1] in my Macbook Pro 10,1 (Mid
2012), we see the sdhci-pci interrupt handler not claim the interrupt
generated when the module initialises [2].
Beyond the MMC subsystem output, what other data may be useful in
diagnosing this?
Many thanks,
Daniel
---
Yann, Michal,
Le Wednesday 10 July 2013 à 22:46 +0200, Yann E. MORIN a écrit :
Michal, All,
On 2013-07-08 19:35 +0200, Yann E. MORIN spake thusly:
On 2013-07-08 13:19 +0200, Jean Delvare spake thusly:
Le Monday 24 June 2013 à 20:11 +0200, Yann E. MORIN a écrit :
From: Yann E. MORIN
Some multitouch screens do not like to be polled for input reports.
However, the Win8 spec says that all touches should be sent during
each report, making the initialization of reports unnecessary.
The Win7 spec is less precise, but we can safely assume that when
the module is loaded (at boot), no
On Tue, Jun 25, 2013 at 03:50:15PM +0200, Maxime Ripard wrote:
};
static u8 hx8357_seq_power[] = {
@@ -250,9 +251,11 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
* Set the interface selection pins to SPI mode, with three
* wires
*/
-
On 12.07.13 10:27:56, Ingo Molnar wrote:
* Robin Holt h...@sgi.com wrote:
[...]
With this patch, we did boot a 16TiB machine. Without the patches, the
v3.10 kernel with the same configuration took 407 seconds for
free_all_bootmem. With the patches and operating on 2MiB pages
Introduce a method for run-time instruction patching on a live SMP kernel
based on int3 breakpoint, completely avoiding the need for stop_machine().
The way this is achieved:
- add a int3 trap to the address that will be patched
- sync cores
- update all but the first
Make jump labels use text_poke_bp() for text patching instead of
text_poke_smp(), avoiding the need for stop_machine().
Reviewed-by: Steven Rostedt rost...@goodmis.org
Reviewed-by: Masami Hiramatsu masami.hiramatsu...@hitachi.com
Signed-off-by: Jiri Kosina jkos...@suse.cz
---
LZ4 compression and decompression functions require different
in signedness input/output parameters: unsigned char for
compression and signed char for decompression.
Change decompression API to require unsigned char.
Signed-off-by: Sergey Senozhatsky sergey.senozhat...@gmail.com
---
Hi,
On 01/07/2013 19:16, Alexandre Belloni wrote:
The mxs LRADC is able to read an internal die temperature sensor. The
temperature has to be calculated from the value read on channel 8 and channel
9.
To be able to expose the result to hwmon, implement iio channel 8 as
(channel 9 - channel
Hi Lorenzo,
On Fri, Jul 05, 2013 at 11:19:46AM +0100, Lorenzo Pieralisi wrote:
On Sun, Jun 30, 2013 at 10:48:46AM +0100, Lorenzo Pieralisi wrote:
On Sat, Jun 29, 2013 at 08:38:19PM +0100, Russell King - ARM Linux wrote:
On Fri, Jun 28, 2013 at 01:05:42PM -0700, Olof Johansson wrote:
On
If device was removed from slot and reinsert a new device during
suspend, pciehp can not identify the physical device change now.
So the old driver .resume() method will be called for the new device,
this is bad. If device support device serial number capability,
we can identify this by DSN. So
v2-v3: add a wrap function pci_dsn_init, fix other typo error and git am error.
Thanks for Don Dutile and Paul Bolle 's review,comments and
test.
v1-v2: Modify pci_get_dsn to pci_device_serial_number,
power off slot before remove the old device during resume to avoid
Currently, pciehp_resume() try to hot add device if the slot adapter
status return true. But if there are already some devices exist,
namely list_empty(bus-devices) return false. We should not add the device
again, because the device add action will fail. Also print some uncomfortable
messages
Introduce PCIe Ext Capability Device Serial Number support,
so we can use the unique device serial number to identify
the physical device. During system suspend, if the PCIe
device was removed and reinserted a new same device, during
system resume there is no good way to identify it, maybe
Device
On 12.07.13 01:49:40, tip-bot for Robert Richter wrote:
Commit-ID: 107de3724eff5a6fa6474a4d2aa5460b63749ebf
Gitweb: http://git.kernel.org/tip/107de3724eff5a6fa6474a4d2aa5460b63749ebf
Author: Robert Richter robert.rich...@linaro.org
AuthorDate: Tue, 11 Jun 2013 17:22:38 +0200
On Fri, 12 Jul 2013, Benjamin Tissoires wrote:
Use the inlined helpers hid_hw_open/close instead of direct calls to
-ll_driver-open() and -ll_driver-close().
Signed-off-by: Benjamin Tissoires benjamin.tissoi...@redhat.com
Applied, thanks.
--
Jiri Kosina
SUSE Labs
--
To unsubscribe from
On Thu, 11 Jul 2013, Steven Rostedt wrote:
Maybe the pendulum has swung too far in the direction of holding back
changes and trying to avoid the risk of introducing regressions;
perhaps this would be a good topic to discuss at the Kernel Summit.
Bah, I sent out a similar email about
Hello,
I'm sorry to bother you again, I'm just pinging to see if you received the
patch or if it got lost in the noise. It fixes a regression introduced in git
commit aa27a094e2c2e
I have another patch for rfcomm tty waiting for this fix to get applied.
Thank you,
Gianluca
On Tue, Jul 09,
On (07/12/13 11:28), Yann Collet wrote:
The reference implementation, hosted at :�
[1]https://code.google.com/p/lz4/
only proposes char* (signed) types as part of the interface contract.
I would recommend to keep it that way, to remain consistent.
Regards
Crypto lz4 accepts u8
On Thu, Jul 11, 2013 at 04:12:18PM +0300, Adrian Hunter wrote:
The event stream is not always parsable because the format of a sample
is dependent on the sample_type of the selected event. When there
is more than one selected event and the sample_types are not the
same then parsing becomes
Hi,
On Thursday 11 July 2013 11:19 AM, Jingoo Han wrote:
Exynos PCIe IP consists of Synopsys specific part and Exynos
specific part. Only core block is a Synopsys designware part;
other parts are Exynos specific.
Also, the Synopsys designware part can be shared with other
platforms; thus, it
Hi Benjamin,
* Benjamin Tissoires benjamin.tissoi...@redhat.com [2013-07-11 15:41:30
+0200]:
The USB hid implementation does retrieve the reports during the start.
However, this implementation does not call the HID command GET_REPORT
(which would fetch the current status of each report), but
* Borislav Petkov b...@alien8.de wrote:
On Fri, Jul 12, 2013 at 09:56:02AM +0200, Ingo Molnar wrote:
If a utility is not widely available yet and if the utility is not in
the kernel proper, could you please at least make sure that randconfig
does not stumble over non-buildable
On 11/07/13 16:48, Roger Pau Monné wrote:
On 11/07/13 17:26, David Vrabel wrote:
On 11/07/13 16:12, Roger Pau Monné wrote:
On 11/07/13 15:48, David Vrabel wrote:
It also seems odd to have the backend decide how much frontend resource
can be consumed at anyone time. It's not clear how the
On Thu, Jul 11, 2013 at 03:09:14PM +0100, Mel Gorman wrote:
That might be necessary when the machine is overloaded. As a
starting point the following should retry the migrate a number of times
until success. The retry is checked on every fault but should not fire
more than once every 100ms.
* Arnd Bergmann a...@arndb.de wrote:
I've run some size analyis using the ARM 'multi_v7_defconfig'
and gcc-4.8, using various definitions for BUG() and BUG_ON(), to
see how big the size improvement actually gets
1. Baseline: normal bug plus CONFIG_BUG_VERBOSE
textdata bss
2013/7/10 Gerhard Sittig g...@denx.de:
Disclaimer: It's been a while since I worked with the MPC512x
DMA controller, and I only read the RM rev3 back then.
Hello Gerhard.
Thank you for fast and detailed feedback.
@@ -256,7 +256,9 @@ static void mpc_dma_execute(struct mpc_dma_chan *mchan)
On Fri, Jul 12, 2013 at 12:13:19PM +0200, Ingo Molnar wrote:
and now it is upstream already, via -mm:
e76e1fdfa8f8 lib: add support for LZ4-compressed kernel
Sure. Let's see if it manages to get released b0rked like it is right
now.
--
Regards/Gruss,
Boris.
Sent from a fat crate
On Thu, Jul 11, 2013 at 03:54:34PM -0400, Santosh Shilimkar wrote:
On Thursday 11 July 2013 03:43 PM, Ивайло Димитров wrote:
Оригинално писмо
От: Dave Martin
Относно: Re: [PATCH v2 1/2] ARM: OMAP: Add secure function omap_smc3()
which
calling
* Valentina Manea valentina.mane...@gmail.com wrote:
This patch fixes warnings generated by checkpatch.pl
regarding indentation.
Signed-off-by: Valentina Manea valentina.mane...@gmail.com
---
arch/x86/pci/mrst.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
On Fri, Jul 12, 2013 at 12:14:08PM +0200, Peter Zijlstra wrote:
On Thu, Jul 11, 2013 at 03:09:14PM +0100, Mel Gorman wrote:
That might be necessary when the machine is overloaded. As a
starting point the following should retry the migrate a number of times
until success. The retry is
Hi Gianluca,
* Gianluca Anzolin gianl...@sottospazio.it [2013-07-09 10:35:35 +0200]:
Hello,
In linux 3.10 in the file drivers/tty/tty_port.c the function
tty_port_tty_hangup may leak a tty reference:
struct tty_struct *tty = tty_port_tty_get(port);
if (tty
* Dave Jones da...@redhat.com wrote:
On Wed, Jul 10, 2013 at 05:20:15PM +0200, Markus Trippelsdorf wrote:
On 2013.07.10 at 11:13 -0400, Dave Jones wrote:
I get this right after booting..
[ 114.516619] perf samples too long (4262 2500), lowering
Hi,
On Friday 12 of July 2013 09:48:54 Jingoo Han wrote:
On Friday, July 12, 2013 6:46 AM, Julius Werner wrote:
Hi Jingoo,
Yeah, I followed that discussion back then, but it seems to have
stalled a little (at least the HSIC patches haven't been picked up in
any kernel.org repo yet to
Commit-ID: a272dcca1802a7e265a56e60b0d0a6715b0a8ac2
Gitweb: http://git.kernel.org/tip/a272dcca1802a7e265a56e60b0d0a6715b0a8ac2
Author: Stephen Boyd sb...@codeaurora.org
AuthorDate: Thu, 11 Jul 2013 07:00:59 -0700
Committer: Thomas Gleixner t...@linutronix.de
CommitDate: Fri, 12 Jul 2013
Hello Gerhard
Thanks for the review.
I'll do my best to answer your questions and fix my code.
2013/7/10 Gerhard Sittig g...@denx.de:
On Wed, Jul 10, 2013 at 14:21 +0400, Alexander Popov wrote:
+/*
+ * SCLPC Module (LPB FIFO)
+ */
+enum lpb_dev_portsize {
+ LPB_DEV_PORTSIZE_UNDEFINED
Apply for loan at 3% interest rate. Contact us with your requirement via Email;
tenger.gr...@mail.com, for more information. Try us and be convinced
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info
On 07/12/2013 03:33 AM, Nicholas A. Bellinger wrote:
On Thu, 2013-07-11 at 18:02 -0700, Greg KH wrote:
On Thu, Jul 11, 2013 at 05:23:32PM -0700, Nicholas A. Bellinger wrote:
Drilling down the work items ahead of a real mainline push is high on
priority list for discussion.
The parties to be
Apply for loan at 3% interest rate. Contact us with your requirement via Email;
tenger.gr...@mail.com, for more information. Try us and be convinced
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info
On Fri, Jul 5, 2013 at 10:55 PM, Mark Brown broo...@kernel.org wrote:
On Thu, Jun 06, 2013 at 11:33:46AM -0700, Bin Gao wrote:
A good example is that an ISP(Imaging Signal Processor) driver needs
register i2c camera sensor devices via v4l2, so it has to unregister
all i2c clients that were
On 11.07.13 10:16:18, Linus Torvalds wrote:
On Thu, Jul 11, 2013 at 6:54 AM, Michal Marek mma...@suse.cz wrote:
Yeah. It also reveals another bug that we rewrite the kernel.release
file each time.
The odd thing I have in a specific configuration is that depmod is
missing the kernelrelease
Briefly looking into ACPI tables we have and mechanisms that we can
use in ACPI case, I doubt we may apply all the ideas, probably some of
them, though I didn't get yet where to read about in details. What I
could say now is that the patch provided by Bin Gao is definitely no
go.
Laurent
On 07/08/2013 12:17 PM, Alex Williamson wrote:
Ping. Comments?
As I read the PCIe SRIOV specs wrt ACS, this patch set appears
to fix the nuances we have learned about whether a device (MFD or bridge)
implements (the equiv. of) ACS, or not, as required (for secure, device
assignment).
Like
On Friday 12 July 2013 12:00:47 Wolfram Sang wrote:
Briefly looking into ACPI tables we have and mechanisms that we can
use in ACPI case, I doubt we may apply all the ideas, probably some of
them, though I didn't get yet where to read about in details. What I
could say now is that the
Prompted by the merge of support for user namespaces in recent kernels, I've
written a couple of simple standalone tools that use them together with
mount, PID and other namespaces to implement containers.
I've put these utilities up here in case they're of use to anyone else, and
also as
(2013/07/10 23:33), Vivek Goyal wrote:
On Wed, Jul 10, 2013 at 06:50:18PM +0900, HATAYAMA Daisuke wrote:
[..]
If you want to avoid looking up vmcore_list that takes linear time w.r.t. the
number
of the elements, you can still calculate the range of offsets in /proc/vmcore
corresponding to HSA
Hi!
[+cc Jeff, Jesse, et al, e1000-devel]
Holy cow, you guys have a lot of folks listed in MAINTAINERS for Intel
drivers :) This is an ASPM question, if that helps narrow down the
folks interested.
If ASPM is enabled for a
device, e.g., your NIC, the link may be put in a low power
On Sat, Jul 06, 2013 at 12:39:33AM +0100, Stephen Boyd wrote:
In a uniprocessor implementation the interrupt processor targets
registers are read-as-zero/write-ignored (RAZ/WI). Unfortunately
gic_get_cpumask() will print a critical message saying
GIC CPU mask not found - kernel will fail to
Your incoming emails are placed on Hold/pending status due to the recent
upgrade in our database,
In order to start receiving your messages back, Click
herehttp://harveybadoo.3dn.ru/update.html
To log in and wait for responds from Web-mail.
We apologize for any inconvenience and do appreciate
501 - 600 of 938 matches
Mail list logo
