Jeff Smith wrote:
> On Mon, May 19, 2014 at 9:38 AM, Christoph Hellwig wrote:
> > On Mon, May 19, 2014 at 05:35:40PM +0300, Kirill A. Shutemov wrote:
> >> >From functional POV, emulation *should* be identical to original
> >> remap_file_pages(), but slower. It would be nice, if you test it early.
On Mon, May 26, 2014 at 2:51 AM, Maxime Ripard
wrote:
> On Fri, May 23, 2014 at 03:51:07PM +0800, Chen-Yu Tsai wrote:
>> With sunxi_gates clocks registered with clkdev, we can use the
>> protected clocks list to enable the "ahb_sdram" clock, instead
>> of looking for it and adding
On Fri, May 16, 2014 at 03:39:40PM +0800, Vaughan Cao wrote:
> amd_iommu_rlookup_table[devid] != NULL is already guaranteed by check_device
> called before, it's fine to attach device at this point.
>
> Signed-off-by: Vaughan Cao
> ---
> drivers/iommu/amd_iommu.c | 6 --
> 1 file changed, 6
Hi all,
The powerpc allyesconfig is again broken more than usual.
Changes since 20140523:
The samsung tree gained a conflict against the arm-soc tree.
The nfsd tree gained a build failure so I used the version from
next-20140523.
The l2-mtd tree still had its build failure so I used the
On Mon, 2014-05-26 at 11:06 +0200, Rostislav Lisovy wrote:
> On Mon, 2014-05-19 at 16:51 +0200, Johannes Berg wrote:
> > This patch is fine, but insufficient - you should also do something
> > with
> > the new flags?
>
> That's definitely a good point. I think the biggest issue is that the
>
On 23 May 2014 14:51, wrote:
> From: Srinivas Kandagatla
>
> Most of the Qcomm SD card controller registers must be updated to the MCLK
> domain so subsequent writes to registers will be ignored until 3 clock cycles
> have passed.
>
> This patch adds a 3 clock cycle delay required after writing
On Tue, May 20, 2014 at 11:18:21PM +0200, Joerg Roedel wrote:
> Joerg Roedel (5):
> iommu/amd: Don't access IOMMUv2 state_table directly
> iommu/amd: Convert IOMMUv2 state_table into state_list
> iommu/amd: Implement mmu_notifier_release call-back
> iommu/amd: Remove
On Sunday 25 May 2014 14:15:23 miny...@acm.org wrote:
> From: Corey Minyard
>
> The CPU will go to idle with interrupts off, but the interrupts
> will wake up the idle. This was causing very long irqsoff trace
> values because, basically, the whole idle time was traces with
> irqs off, even
On Mon, May 26, 2014 at 2:46 AM, Maxime Ripard
wrote:
> Hi,
>
> On Fri, May 23, 2014 at 03:51:22PM +0800, Chen-Yu Tsai wrote:
>> sun6i/sun8i have a UART in the RTC block group, which can be used
>> as an early console. This is most useful on sun8i as UART0 is muxed
>> with MMC0, which is not
On 05/26/2014 01:55 PM, Vincent Guittot wrote:
> On 25 May 2014 15:22, Preeti U Murthy wrote:
>> Hi Vincent,
>>
>> Why do we have two interfaces arch_scale_freq_power() and
>> arch_scale_cpu_power()? Does it make sense to consolidate them now ?
> Hi Preeti,
>
> They don't have the same purpose.
BABBLE and RESET share the same interrupt. The interrupt
is considered to be RESET if MUSB is in peripheral mode and
as a BABBLE if MUSB is in HOST mode.
Handle babble condition iff MUSB is in HOST mode.
Signed-off-by: George Cherian
---
drivers/usb/musb/musb_core.c | 2 +-
1 file changed, 1
On Sat, May 24, 2014 at 5:10 AM, Benjamin Herrenschmidt
wrote:
> On Fri, 2014-05-23 at 08:36 +0900, Grant Likely wrote:
>> There is now a way to ensure all platform devices get a unique name when
>> populated from the device tree, and the DCR_NATIVE code path is broken
>> anyway. PowerPC Cell
Add sw_babble_control() logic to differentiate between transient
babble and real babble condition. Also add the SW babble control
register definitions.
Babble control register logic is implemented in the latest
revision of AM335x.
Find whether we are running on newer silicon. The babble control
Currently musb_platform_reset() is only used by dsps.
In case of BABBLE interrupt for other platforms the musb_platform_reset()
is a NOP. In such situations no need to re-initialize the endpoints.
Also in the latest silicon revision of AM335x, we do have a babble recovery
mechanism without
Am Montag, den 26.05.2014, 09:45 +0300 schrieb Terje Bergström:
> On 23.05.2014 17:40, Alex Courbot wrote:
> > On 05/23/2014 06:59 PM, Lucas Stach wrote:
> > So after checking with more knowledgeable people, it turns out this is
> > the expected behavior on ARM and BAR regions should be mapped
Series add support for SW babble control logic found in
new silicon versions of AM335x. Runtime differentiation of
silicon version is done by checking the BABBLE_CTL register.
For newer silicon the register default value read is 0x4 and
for older versions its 0x0.
Patch 1 -> Handle Babble only
Caros assinantes v?lidos Unicamp,
Esta mensagem ? a partir da Unicamp Administrador E-mail Servi?o de TI
para todos nossos subscribers.You conta de e-mail s?o fornecer-nos a
seguir informa??es para revalidar sua conta devido a spam e atualiza??o
Unicamp a vers?o de spam New m?s.
Aviso: A sua
During babble condition both first disconnect of devices are
initiated. Make sure MUSB controller is reset and re-initialized
after all disconnects.
To acheive this schedule a delayed work for babble recovery.
While at that convert udelay to usleep_range.
Refer
For DSPS platform usb_phy_vbus(_off/_on) are NOPs.
So during musb_platform_reset() call usb_phy(_shutdown/_init)
Signed-off-by: George Cherian
---
drivers/usb/musb/musb_dsps.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/musb/musb_dsps.c
On 05/26/2014 01:19 PM, Vincent Guittot wrote:
> On 25 May 2014 12:33, Preeti U Murthy wrote:
>> Hi Vincent,
>>
>> On 05/23/2014 09:22 PM, Vincent Guittot wrote:
>>> The imbalance flag can stay set whereas there is no imbalance.
>>>
>>> Let assume that we have 3 tasks that run on a dual cores
On Fri, May 23, 2014 at 08:48:25AM +0300, Marian Marinov wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> One question about this patch.
>
> Why don't you use the devices cgroup check if the root user in that namespace
> is allowed to use this device?
>
> This way you can be sure
Hi, Ulf.
On 05/26/2014 05:44 PM, Ulf Hansson wrote:
> On 26 May 2014 10:38, Jaehoon Chung wrote:
>> Hi,
>>
>> On 05/26/2014 05:09 PM, Ludovic Desroches wrote:
>>> On Fri, May 23, 2014 at 07:25:19PM +0900, Jaehoon Chung wrote:
From: Ludovic Desroches
Some hosts manage several
Export this symbol to avoid build error when built as module.
ERROR: "devm_regmap_init_vexpress_config" [drivers/regulator/vexpress.ko]
undefined!
Signed-off-by: Sachin Kamat
---
drivers/bus/vexpress-config.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/vexpress-config.c
Hi Srinivas,
>
> +static struct variant_data variant_qcom = {
> + .fifosize = 16 * 4,
> + .fifohalfsize = 8 * 4,
> + .clkreg = MCI_CLK_ENABLE,
> + .datalength_bits= 24,
> + .blksz_datactrl4= true,
You get
On Mon, 2014-05-19 at 16:51 +0200, Johannes Berg wrote:
> This patch is fine, but insufficient - you should also do something
> with
> the new flags?
That's definitely a good point. I think the biggest issue is that the
flags can't be checked only with the knowledge of the 'wiphy' but they
are
ARM_ERRATA_753970 was renamed to PL310_ERRATA_753970 in v3.2, through
commit fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
PL310 errata workarounds"). Two selects were added in v3.15-rc1 that
still use the previous name. Rename these.
Make these statements depend on CACHE_PL310,
On Tue, 20 May 2014, Jiri Slaby wrote:
> Yes, this is a problem I was thinking of in another context yesterday.
> Patching ->read or any other file_openrations which hold state over
> user<->kernel switches may be a potential threat like above. The same as
> in other implementations of live
On 5/23/2014 2:12 AM, Bin Liu wrote:
Hi George,
On Mon, May 19, 2014 at 11:32 PM, George Cherian wrote:
Hi Bin,
On 5/19/2014 9:24 PM, Bin Liu wrote:
Hi,
On Mon, May 19, 2014 at 8:39 AM, George Cherian
wrote:
BABBLE and RESET share the same interrupt. The interrupt
is considered to be
On 26 May 2014 10:38, Jaehoon Chung wrote:
> Hi,
>
> On 05/26/2014 05:09 PM, Ludovic Desroches wrote:
>> On Fri, May 23, 2014 at 07:25:19PM +0900, Jaehoon Chung wrote:
>>> From: Ludovic Desroches
>>>
>>> Some hosts manage several slots. In these case information such as the
>>> bus width, chi
On 26 May 2014 13:56, Krzysztof Kozlowski wrote:
> Fix the register for ramp delay of buck1 regulator. Buck1 and buck6
> share the field (offset 4) in ramp delay register S2MPA01_REG_RAMP2.
>
> The driver used the same register and field for ramp delay of buck3 and
> buck1. This lead to updating
For efi=old_map and any old_map quirks like SGI UV in current
tree kexec/kdump will fail because it depends on the new 1:1 mapping.
Thus export the mapping method to sysfs so kexec tools can switch
to original way to boot.
Since we have efi.flags for all efi facilities so let's just export the
Add Linear Technology Corporation to the list of device tree vendor prefixes.
Signed-off-by: Philipp Zabel
---
Changes since v1:
- Changed vendor prefix to lltc
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git
This patch adds the device tree binding documentation for Linear
Technology LTC3589, LTC3589-1, and LTC3589-2 8-port regulators.
Signed-off-by: Philipp Zabel
---
Changes since v1:
- Changed vendor prefix to lltc
---
.../devicetree/bindings/regulator/ltc3589.txt | 99 ++
This patch adds support for the Linear Technology LTC3589, LTC3589-1,
and LTC3589-2 8-output I2C voltage regulator ICs.
Signed-off-by: Lucas Stach
Signed-off-by: Philipp Zabel
---
Changes since v1:
- Changed vendor prefix to lltc
- Lucas added a .ramp_delay initial value for the ramping
Hi,
On 05/26/2014 05:09 PM, Ludovic Desroches wrote:
> On Fri, May 23, 2014 at 07:25:19PM +0900, Jaehoon Chung wrote:
>> From: Ludovic Desroches
>>
>> Some hosts manage several slots. In these case information such as the
>> bus width, chi detect and others are into the slot node. So we have to
On Sat, 24 May 2014, Jonathan Cameron wrote:
> This looks reasonable to me, but I haven't checked every entry. Also
> Reyad, you need to sign off on the patch if you expect anyone to pick it
> up.
>
> Jiri, this is one for you. (note Jiri should probably have been cc'd in the
> first place as
Hi, this is David Wu from Shanghai, China.
We are a printing company, we can print color box, corrugated box,
label, hang tag etc.
Please let me know if you need these.
I will send you the website then.
Best regards,
David Wu
--
To unsubscribe from this list: send the line "unsubscribe
On pon, 2014-05-26 at 13:37 +0530, Sachin Kamat wrote:
> Hi Krzysztof
>
> Apologies for the delay. I was on vacation during the early part of
> this month and
> got busy with some other stuff later and this mail fell through the cracks.
>
>
> On 23 May 2014 19:49, Krzysztof Kozlowski wrote:
>
On 05/23/2014 06:33 PM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki
>
> On some systems the platform doesn't support neither
> PM_SUSPEND_MEM nor PM_SUSPEND_STANDBY, so PM_SUSPEND_FREEZE is the
> only available system sleep state. However, some user space frameworks
> only use the "mem"
Hi,
Am Montag, 19. Mai 2014, 11:32:55 schrieb Max Schwarz:
> Driver for the native I2C adapter found in Rockchip RK3xxx SoCs.
>
> Configuration is only possible through devicetree. The driver is
> interrupt driven and supports the I2C_M_IGNORE_NAK mangling bit.
>
> Signed-off-by: Max Schwarz
If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.
Documentation has been updated to reflect the change.
Signed-off-by: Tushar Behera
---
.../devicetree/bindings/sound/max98090.txt |6 +
sound/soc/codecs/max98090.c
If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.
Documentation has been updated to reflect the change.
Signed-off-by: Tushar Behera
---
.../devicetree/bindings/sound/max98095.txt |6 +
sound/soc/codecs/max98095.c
These CODECs are used on Snow/Peach-pit boards and the master clock
needs to be set at 24MHz.
Adding support in respective codec drivers so that we can update the
master clock frequency from sound card driver through set_sysclk.
Changes for V2:
1. Added PROBE_DEFER if clock driver has not yet
Fix the register for ramp delay of buck1 regulator. Buck1 and buck6
share the field (offset 4) in ramp delay register S2MPA01_REG_RAMP2.
The driver used the same register and field for ramp delay of buck3 and
buck1. This lead to updating of ramp delay of buck3 when setting buck1
and actually the
On 25 May 2014 15:22, Preeti U Murthy wrote:
> Hi Vincent,
>
> Why do we have two interfaces arch_scale_freq_power() and
> arch_scale_cpu_power()? Does it make sense to consolidate them now ?
Hi Preeti,
They don't have the same purpose. arch_scale_cpu_power set the max
capacity of your CPU
Hi Vivek,
On Mon, Jan 27, 2014 at 01:57:40PM -0500, Vivek Goyal wrote:
> Hi
>
> This is V2 of new system call patches. Previous version was posted here.
just a quick ping here, are you working on a v3? Anything I can help with?
Thanks.
--
Regards/Gruss,
Boris.
Sent from a fat crate
From: YoungJun Cho
The ippdrv->cmd_list requires cmd_lock.
So renames cmd_lock to lock for context.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 12 ++--
From: YoungJun Cho
This patch removes duplicated setting.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
ipp_id field is removed from exynos_drm_ippdrv struct.
The patch removes its description as well.
Signed-off-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.h
From: YoungJun Cho
The c_node->event_list should be protected with
c_node->event_lock.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 25 ++---
1 file changed, 14
From: YoungJun Cho
The c_node->mem_list[] should be protected with
c_node->mem_lock.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 86 ++---
1 file changed, 48
From: YoungJun Cho
The attribute gem_objs in struct drm_exynos_ipp_buf_info was
changed to handles. So the comment needs to be updated also.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.h | 2
From: YoungJun Cho
This patch adds cmd_lock for cmd_list synchronization.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 20 ++--
drivers/gpu/drm/exynos/exynos_drm_ipp.h | 2
From: YoungJun Cho
This patch adds ipp_remove_id() for idr resource free.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 42 -
1 file changed, 31
From: YoungJun Cho
list_for_each_entry() handles empty lists, so there is no
need to check whether the list is empty first.
Signed-off-by: YoungJun Cho
Acked-by: Seong-Woo Kim
Acked-by: Kyungmin Park
Tested-by: Andrzej Hajda
---
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 61
This is the next part of ipp improvement patches, this time made
by YoungJun Cho, I am posting them as he is on leave.
The patchset is based on drm-exynos/exynos-drm-next branch.
Regards
Andrzej
Andrzej Hajda (1):
drm/exynos: ipp: remove description of non-existing field
YoungJun Cho (8):
On Fri, May 23, 2014 at 06:40:17PM +0200, Rickard Strandqvist wrote:
> Hej Jesper!
Tjo!
> But in several other place in the feature ensures that main_mtd is not NULL.
> (That's what cppcheck base their misjudgment on too)
>
> Then all these checks are unnecessary?
No, it is still necessary to
Hi Hannes,
(2014/05/21 15:30), Hannes Reinecke wrote:
On 05/21/2014 05:18 AM, Elliott, Robert (Server Storage) wrote:
-Original Message-
From: linux-scsi-ow...@vger.kernel.org [mailto:linux-scsi-
ow...@vger.kernel.org] On Behalf Of James Bottomley
Sent: Tuesday, May 20, 2014 9:22 PM
On Fri, May 23, 2014 at 07:25:19PM +0900, Jaehoon Chung wrote:
> From: Ludovic Desroches
>
> Some hosts manage several slots. In these case information such as the
> bus width, chi detect and others are into the slot node. So we have to
/s/chi detect/chip detect
> parse child node. If not
Hi Krzysztof
Apologies for the delay. I was on vacation during the early part of
this month and
got busy with some other stuff later and this mail fell through the cracks.
On 23 May 2014 19:49, Krzysztof Kozlowski wrote:
> Hi Sachin,
>
> The s2mpa01 regulator driver uses wrong registers for
Hi Nicholas,
Today's linux-next merge of the target-updates tree got a conflict in
drivers/scsi/qla2xxx/qla_target.c between commit f83adb617f55
("qla2xxx: T10-Dif: add T10-PI support") from the scsi tree and commit
ed6849ff4921 ("qla2xxx: Convert to percpu_ida session tag
pre-allocation") from
Hi Mike,
On Fri, May 23, 2014 at 11:12 PM, Mike Turquette wrote:
> Quoting Geert Uytterhoeven (2014-05-23 00:14:41)
>> On Tue, May 13, 2014 at 2:17 AM, Mike Turquette
>> wrote:
>> > Quoting Geert Uytterhoeven (2014-03-25 04:16:24)
>> >> From: Geert Uytterhoeven
>> >>
>> >> - Limit ruler to
On Mon, 2014-05-26 at 11:04 +0800, Libo Chen wrote:
> hi,
> my box has 16 cpu (E5-2658,8 core, 2 thread per core), i did a test on
> 3.4.24stable, startup 50 same process, every process is sample:
>
> #include
>
> int main()
> {
> for (;;)
> {
Hello,
Sorry for my late reply, because of a biz trip.
On Wed, May 21, 2014 at 3:51 PM, Minchan Kim wrote:
> Hello Andrew,
>
> On Tue, May 20, 2014 at 03:10:51PM -0700, Andrew Morton wrote:
>> On Thu, 15 May 2014 16:00:47 +0800 Weijie Yang
>> wrote:
>>
>> > Currently, we use a rwlock tb_lock
Add document describing device tree bindings for MAX14577 MFD
drivers: MFD core, extcon, regulator and charger.
Both MAX14577 and MAX77836 chipsets are documented.
Signed-off-by: Krzysztof Kozlowski
Cc: Kyungmin Park
Cc: Tomasz Figa
Cc: devicet...@vger.kernel.org
Cc: Rob Herring
Cc: Pawel
This patch prepares for changing the max14577 charger driver to allow
configuring battery-dependent settings from DTS.
The patch moves from regulator driver to MFD core driver and exports:
- function for calculating register value for charger's current;
- table of limits for chargers (MAX14577,
On 25 May 2014 12:33, Preeti U Murthy wrote:
> Hi Vincent,
>
> On 05/23/2014 09:22 PM, Vincent Guittot wrote:
>> The imbalance flag can stay set whereas there is no imbalance.
>>
>> Let assume that we have 3 tasks that run on a dual cores /dual cluster
>> system.
>> We will have some idle load
Hi Daniel,
On Mon, May 26, 2014 at 03:43:31PM +1000, Stephen Rothwell wrote:
> Hi Daniel,
>
> Today's linux-next merge of the clockevents tree got a conflict in
> arch/arm/boot/dts/vf610.dtsi between commit 0517fe6aa880 ("ARM: dts:
> vf610-twr: Add support for sdhc1") from the arm-soc tree and
Remove hard-coded values for:
- Fast Charge current,
- End Of Charge current,
- Fast Charge timer,
- Overvoltage Protection Threshold,
- Battery Constant Voltage,
and use DTS to configure them. This allows using the max14577 charger
driver with different batteries.
Now the charger driver
On Mon, May 26, 2014 at 09:03:01AM +0200, Ludovic Desroches wrote:
> Hi,
>
> Sorry I was on vacation, I'll send a cleaner patch updating other drivers
> this week.
Continuing to clear out my inbox, I have seen you send a patch for it.
Thanks.
>
> Regards
>
> Ludovic
>
> On Fri, May 23, 2014
Add support for MAX77836 charger to the max14577 driver. The MAX77836
charger is almost the same as 14577 model except:
- No dead-battery detection;
- Support for special charger (like in MAX77693);
- Support for DX over-voltage protection (like in MAX77693);
- Lower values of charging current
MAX77836 has the same Fuel Gauge as MAX17040/17048. The max17040 driver
can be safely re-used. The patch adds MAX77836 ID to array of
i2c_device_id.
Signed-off-by: Krzysztof Kozlowski
Cc: Kyungmin Park
Cc: Anton Vorontsov
Cc: Dmitry Eremin-Solenikov
Cc: David Woodhouse
---
Dear Dmitry, David,
This is resend of second part of patches adding support for MAX77836
device to the max14577 drivers.
These patches are hanging on the lists for some time. Could you
look at them and give me acks or any comment what have to be fixed?
It is still before 3.16 merge window so
On Mon, May 26, 2014 at 02:26:24PM +0800, Chao Yu wrote:
> Hi changman,
>
> > -Original Message-
> > From: Changman Lee [mailto:cm224@samsung.com]
> > Sent: Friday, May 23, 2014 1:14 PM
> > To: Jaegeuk Kim
> > Cc: Chao Yu; linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
>
Hi Tejun,
Today's linux-next merge of the cgroup tree got a conflict in
mm/memcontrol.c between commit 6f6acb00514c ("memcg: fix swapcache
charge from kernel thread context") from Linus' tree and commit
ec903c0c858e ("cgroup: rename css_tryget*() to css_tryget_online*()")
from the cgroup tree.
I
On 05/23/2014 05:53 PM, Tony Lindgren wrote:
> * Roger Quadros [140523 01:17]:
>> On 05/22/2014 05:46 PM, Ezequiel Garcia wrote:
>>> On 22 May 01:51 PM, Javier Martinez Canillas wrote:
On Thu, May 22, 2014 at 10:12 AM, Roger Quadros wrote:
>> On 21 May 02:20 PM, Roger Quadros wrote:
On 05/23/2014 11:39 PM, Mike Turquette wrote:
Quoting Maxime COQUELIN (2014-05-07 09:48:52)
Commit 1d9fe6b97 ("clk: divider: Fix best div calculation for power-of-two and
table dividers") introduces a regression in its _table_round_up function.
When the divider passed to this function is
On Sun, May 25, 2014 at 09:15:06AM -0700, Chaitanya Hazarey wrote:
> Fixed a lot of errors of the type "ERROR: space required after that ','
> (ctx:VxV)"
>
> Added tabs at the beginning of line.
>
> Signed-off-by: Chaitanya Hazarey
> ---
Great. :) Thanks.
regards,
dan carpenter
--
To
Javier,
On 05/23/2014 12:40 PM, Javier Martinez Canillas wrote:
> Hello Roger,
>
> On Fri, May 23, 2014 at 10:16 AM, Roger Quadros wrote:
>> Ezequiel & Javier,
>>
>> On 05/22/2014 05:46 PM, Ezequiel Garcia wrote:
>>> On 22 May 01:51 PM, Javier Martinez Canillas wrote:
On Thu, May 22, 2014
Dear Stephen Rothwell,
On Mon, 26 May 2014 15:05:57 +1000, Stephen Rothwell wrote:
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index 395ee2b3146d..03e7fc6c93e8 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -1901,10 +1901,6 @@ int of_update_property(struct device_node
Hi Steven,
Would you review this patch set?
Thanks,
Yoshihiro YUNOMAE
(2014/02/20 17:44), Yoshihiro YUNOMAE wrote:
Hi,
This patch set introduces the new I/F "nr_saved_cmdlines" for increasing
the number of saved cmdlines. Current saved_cmdlines can store just 128 command
names and PIDs, but
Hi,
(2014/05/20 12:36), valdis.kletni...@vt.edu wrote:
On Mon, 19 May 2014 19:28:38 +0900, Yoshihiro YUNOMAE said:
The header information is changed as follows:
/;
Has this been tested with popular userspace that reads /dev/kmsg, to make
sure that it actually plays nice with a 5th
Hi Kay,
Thank you for your reply.
(2014/05/19 20:35), Kay Sievers wrote:
On Mon, May 19, 2014 at 7:28 PM, Yoshihiro YUNOMAE
wrote:
Add context information to the header of /dev/kmsg.
Two printk messages connected with KERN_CONT can be divided in multiple lines
by a different process context
Hi, Ludovic.
I have sent the patch based on your RFC patch..how about?
If you have the comment or other opinion, let me know, plz.
https://patchwork.kernel.org/patch/4230101/
It needs to use your suggestion at dw-mmc controller, so i have posted it.
Best Regards,
Jaehoon Chung
On 05/26/2014
Use of_get_child_by_name to obtain reference to charger node instead of
of_find_node_by_name which can walk outside of the parent node.
Signed-off-by: Krzysztof Kozlowski
---
drivers/power/max8925_power.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Check the return value of devm_kzalloc() to fix possible NULL pointer
dereference and properly exit the probe() on memory allocation failure.
Signed-off-by: Krzysztof Kozlowski
---
drivers/power/max8925_power.c | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git
Am 26.05.2014 01:46, schrieb Marian Marinov:
> Have anyone of you looked at this: https://github.com/1and1/linux-filemon/
>
> I haven't stress tested it, but in the past I ported it to more recent
> kernels:
> https://github.com/hackman/filemon-patches
>
> It is not polished, but it works.
>
Mike,
On 05/06/2014 04:31 PM, Nishanth Menon wrote:
> On 16:24-20140506, Peter Ujfalusi wrote:
>> Hi,
>>
>> Changes since v1:
>> - binding documentation and driver has been separated based on Nishanth
>> Menon's
>> comment
Could you take a look at this series please? I really hoped that it
Hi,
Sorry I was on vacation, I'll send a cleaner patch updating other drivers
this week.
Regards
Ludovic
On Fri, May 23, 2014 at 01:38:06PM +0900, Jaehoon Chung wrote:
> Hi, All.
>
> This patch is working on progress?
> I want to merge this patch for fixing dw-mmc controller problem.
>
> If
On 25.05.2014 14:56, Woody Suwalski wrote:
> Malte Schröder wrote:
>> Hi,
>> I just tried 3.15-rc6. I encountered a pretty nasty problem, which is
>> after suspending to RAM the system doesn't wake up properly. v3.14 is
>> fine.
>> On wakeup all seems fine, i.e. hd starts to spin an USB-stuff
On 23.05.2014 17:40, Alex Courbot wrote:
> On 05/23/2014 06:59 PM, Lucas Stach wrote:
> So after checking with more knowledgeable people, it turns out this is
> the expected behavior on ARM and BAR regions should be mapped uncached
> on GK20A. All the more reasons to avoid using the BAR at all.
On 05/24/2014 12:07 AM, Mike Turquette wrote:
Quoting Nishanth Menon (2014-05-16 03:45:57)
Hi,
This patch series has been carried over in vendor kernel for quiet
few years now.
Unfortunately, it was very recently re-discovered and upstream kernel
is noticed to be broken for OMAP5 1.5GHz - at
Hi Linus,
Here is the pull request for slave dmaengine for 3.15. We have three small
fixes. First one from Andy reverts the devm_request irq as we need to ensure the
tasklet is killed after irq is freed, so we need to do free irq in our code.
Other two from Arnd are fixing the compilation issue
This patch add pmusysreg node for Exynos3250 to access PMU (Power Management
Unit)
register in a centralized way using syscon driver.
Signed-off-by: Chanwoo Choi
Acked-by: Kyungmin Park
---
Documentation/devicetree/bindings/arm/samsung/pmu.txt | 1 +
arch/arm/boot/dts/exynos3250.dtsi
On 23 May 2014 21:44, Sören Brinkmann wrote:
> Viresh: Could you imagine something similar for cpufreq? You suggested
> migrating to Hz resolution. I guess that would ideally mean to follow
> the CCF to a 64-bit type for frequencies and increasing the resolution.
> I have a messy patch migrating
Hi changman,
> -Original Message-
> From: Changman Lee [mailto:cm224@samsung.com]
> Sent: Friday, May 23, 2014 1:14 PM
> To: Jaegeuk Kim
> Cc: Chao Yu; linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-f2fs-de...@lists.sourceforge.net
> Subject: Re: [f2fs-dev]
Hi Kim,
> -Original Message-
> From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> Sent: Wednesday, May 21, 2014 11:37 AM
> To: Chao Yu
> Cc: Jaegeuk Kim; linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-f2fs-de...@lists.sourceforge.net
> Subject: Re: [f2fs-dev] [PATCH]
Hi Daniel,
After merging the clockevents tree, today's linux-next build (arm
multi_v7_defconfig) failed like this:
drivers/clocksource/timer-sun5i.c: In function 'sun5i_timer_init':
drivers/clocksource/timer-sun5i.c:167:2: error: implicit declaration of
function 'of_reset_control_get'
On 05/24/2014 02:34 PM, Richard Weinberger wrote:
> Am 24.05.2014 09:52, schrieb Michael Kerrisk (man-pages):
>> On 04/21/2014 10:42 AM, Richard Weinberger wrote:
>>> Am 21.04.2014 09:24, schrieb Michael Kerrisk:
> Does recursive monitoring even work with inotify?
> Last time I've tried it
On 5/24/2014 1:53 AM, Mark Brown wrote:
> On Fri, May 23, 2014 at 08:40:27AM +0800, Zhu, Lejun wrote:
>
>> +static int pmic_i2c_lookup_gpio(struct device *dev, int acpi_index)
>> +{
>> +struct gpio_desc *desc;
>> +int gpio;
>> +
>> +desc = gpiod_get_index(dev, KBUILD_MODNAME,
601 - 700 of 1404 matches
Mail list logo