On 01/02/2015 03:40 AM, Erico Nunes wrote:
PVR version code was missing in the cpu_ver_lookup table for the following
versions: 8.50.b 8.50.c 9.2 9.3
This caused /proc/cpuinfo to display CPU-Ver: Unknown for these versions.
This was detected and the patch tested with MicroBlaze version
Add missing target architectures - virtex7, ultrascale virtex
and ultrascale kintex.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
arch/microblaze/kernel/cpu/cpuinfo.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c
b/arch/microblaze/kernel
On 12/19/2014 07:21 PM, Soren Brinkmann wrote:
Just pass on error codes instead of overriding them.
Signed-off-by: Soren Brinkmann soren.brinkm...@xilinx.com
---
arch/microblaze/kernel/intc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
On 01/11/2015 10:38 PM, Linus Walleij wrote:
On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
soren.brinkm...@xilinx.com wrote:
Add pinctrl descriptions to the zc702 and zc706 device trees.
Signed-off-by: Soren Brinkmann soren.brinkm...@xilinx.com
Tested-by: Andreas Färber afaer...@suse.de
On 01/11/2015 10:36 PM, Linus Walleij wrote:
On Fri, Jan 9, 2015 at 4:43 PM, Soren Brinkmann
soren.brinkm...@xilinx.com wrote:
Select pinctrl and the Zynq pinctrl driver.
Signed-off-by: Soren Brinkmann soren.brinkm...@xilinx.com
Tested-by: Andreas Färber afaer...@suse.de
---
Changes
On 01/11/2015 10:31 PM, Pavel Machek wrote:
On Sun 2015-01-11 21:58:00, Konrad Zapalowicz wrote:
On 01/11, Pavel Machek wrote:
On Sun 2015-01-11 17:24:26, Konrad Zapalowicz wrote:
On 01/11, atull wrote:
On Sat, 10 Jan 2015, Konrad Zapalowicz wrote:
On 01/06, at...@opensource.altera.com
On 01/12/2015 09:45 AM, Pavel Machek wrote:
On Sun 2015-01-11 10:29:00, atull wrote:
On Sat, 10 Jan 2015, Pavel Machek wrote:
On Sat 2015-01-10 10:10:51, Pantelis Antoniou wrote:
Hi Pavel,
On Jan 9, 2015, at 22:56 , Pavel Machek pa...@denx.de wrote:
On Fri 2015-01-09 13:14:24, atull
))) __gu_val; \
__gu_err; \
})
Applied.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http
); \
int __pu_err = 0; \
\
Applied.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel
parallella - Use reference instead of hardcoded path
(linux,stdout-path)
stdout-path is used by bootloader to identify console.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
U-Boot driver model requires stdout-path.
---
arch/arm/boot/dts/zynq-parallella.dts | 3 ++-
arch
Add missing alias node.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
arch/arm/boot/dts/zynq-parallella.dts | 5 +
arch/arm/boot/dts/zynq-zybo.dts | 5 +
2 files changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-parallella.dts
b/arch/arm/boot/dts/zynq
On 02/12/2015 03:58 PM, Sören Brinkmann wrote:
On Thu, 2015-02-12 at 12:01PM +0100, Michal Simek wrote:
On 02/12/2015 11:54 AM, Mark Rutland wrote:
On Thu, Feb 12, 2015 at 10:42:47AM +, Michal Simek wrote:
Add OCM node for all zynq boards. OCM location
can changed but for all current
On 02/12/2015 04:07 PM, Mark Rutland wrote:
On Thu, Feb 12, 2015 at 02:58:36PM +, Sören Brinkmann wrote:
On Thu, 2015-02-12 at 12:01PM +0100, Michal Simek wrote:
On 02/12/2015 11:54 AM, Mark Rutland wrote:
On Thu, Feb 12, 2015 at 10:42:47AM +, Michal Simek wrote:
Add OCM node for all
;\
cmpu %0, %1, %2;\
yes - you are right.
Thanks for reporting this. Will fix it.
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu
From: Nathan Rossi nathan.ro...@xilinx.com
When building specific DTBs out of the kernel tree the vendor subdirs
(boot/dts/vendor) are not created, ensure that they are before
building the DTB.
Signed-off-by: Nathan Rossi nathan.ro...@xilinx.com
Signed-off-by: Michal Simek michal.si
think this is impact performance a lot.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT
On 02/27/2015 04:09 PM, Josh Cartwright wrote:
By making use of the restart_handler chain mechanism, the SLCR-based
reset mechanism can be prioritized amongst other mechanisms available on
a particular board.
Choose a default high-ish priority of 192 for this restart mechanism.
On 03/19/2015 03:24 PM, Josh Cartwright wrote:
By making use of the restart_handler chain mechanism, the SLCR-based
reset mechanism can be prioritized amongst other mechanisms available on
a particular board.
Choose a default high-ish priority of 192 for this restart mechanism.
On 03/19/2015 02:33 PM, Josh Cartwright wrote:
By making use of the restart_handler chain mechanism, the SLCR-based
reset mechanism can be prioritized amongst other mechanisms available on
a particular board.
Choose a default high-ish priority of 192 for this restart mechanism.
On 03/19/2015 01:44 PM, Josh Cartwright wrote:
On Thu, Mar 19, 2015 at 11:44:23AM +0100, Michal Simek wrote:
On 02/27/2015 04:09 PM, Josh Cartwright wrote:
[..]
+++ b/arch/arm/mach-zynq/slcr.c
@@ -15,6 +15,7 @@
*/
#include linux/io.h
+#include linux/reboot.h
#include linux/mfd
Enable the xilinx driver for ARM64.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v2:
- Based on discussion with Marc and Jean enable this driver just for
ARM64.
BTW: Jean suggested to enable it for all ARM platforms
On 03/09/2015 02:55 PM, Marc Kleine-Budde wrote:
On 03/09/2015 02:53 PM, Jean Delvare wrote:
Le Monday 09 March 2015 à 10:56 +0100, Marc Kleine-Budde a écrit :
On 03/09/2015 10:52 AM, Michal Simek wrote:
On 03/09/2015 10:13 AM, Marc Kleine-Budde wrote:
On 03/09/2015 09:58 AM, Michal Simek
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v3:
- Add the missing GIC maintenance interrupt
Reported-by Marc Zyngier marc.zyng...@arm.com
- Fix PPI interrupt mask
Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
Test for all archs done by Kbuild test robot without any problem.
---
drivers/watchdog/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers
Remove Kconfig dependency and enable driver for
all ARCHs.
Also update help description.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v2:
- Remove ARM and ARM64 in Kconfig
Test for all archs done by Kbuild test robot
Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Test for all archs done by Kbuild test robot without any problem.
---
drivers/net/can/Kconfig | 1 -
1 file changed, 1 deletion
On 03/09/2015 09:50 AM, Marc Kleine-Budde wrote:
On 03/09/2015 09:48 AM, Michal Simek wrote:
Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Test for all archs done
)
Microblaze patches for 4.0-rc4
- Fix syscall error recovery
Jamie Garside (1):
microblaze: Fix syscall error recovery for invalid syscall IDs
Michal Simek (1):
microblaze: Coding style
From: Punnaiah Choudary Kalluri punnaiah.choudary.kall...@xilinx.com
ZynqMP soc has single interrupt for all the queue events. So,
passing the IRQF_SHARED flag for interrupt registration call.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal Simek michal.si
From: Punnaiah Choudary Kalluri punnaiah.choudary.kall...@xilinx.com
Include multi queue support for the ethernet IP version in xilinx ZynqMP
SoC.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Nicolas Ferre nicolas.fe
On 03/09/2015 10:13 AM, Marc Kleine-Budde wrote:
On 03/09/2015 09:58 AM, Michal Simek wrote:
On 03/09/2015 09:50 AM, Marc Kleine-Budde wrote:
On 03/09/2015 09:48 AM, Michal Simek wrote:
Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: Michal Simek michal.si
Hi Mark,
On 03/27/2015 06:53 PM, Mark Brown wrote:
On Fri, Mar 27, 2015 at 11:55:49AM +0100, Michal Simek wrote:
Please fix your mail client to word wrap within paragraphs at less than
80 columns - this makes your mails easier to read and reply to.
You are the first one who had problem
On 03/29/2015 10:57 PM, Olof Johansson wrote:
On Wed, Mar 18, 2015 at 01:20:04PM +, Will Deacon wrote:
On Wed, Mar 18, 2015 at 12:39:07PM +, Michal Simek wrote:
From: Nathan Rossi nathan.ro...@xilinx.com
When building specific DTBs out of the kernel tree the vendor subdirs
(boot/dts
From: Nathan Rossi nathan.ro...@xilinx.com
When building specific DTBs out of the kernel tree the vendor subdirs
(boot/dts/vendor) are not created, ensure that they are before
building the DTB.
Signed-off-by: Nathan Rossi nathan.ro...@xilinx.com
Signed-off-by: Michal Simek michal.si
On 03/31/2015 07:47 AM, Mark Brown wrote:
On Mon, Mar 30, 2015 at 08:46:10AM +0200, Michal Simek wrote:
On 03/27/2015 06:53 PM, Mark Brown wrote:
On Fri, Mar 27, 2015 at 11:55:49AM +0100, Michal Simek wrote:
Please fix your mail client to word wrap within paragraphs at less than
80 columns
of_property_read_bool for
these properties.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT
On 03/31/2015 01:16 PM, Mark Brown wrote:
On Tue, Mar 31, 2015 at 10:16:57AM +0200, Michal Simek wrote:
On 03/31/2015 07:47 AM, Mark Brown wrote:
num-cs *is* a software setting.
ok - what to do with that? Remove it because it shouldn't be passed via DT?
Well, there's a lot of existing
Hi Mark,
On 03/08/2015 08:00 PM, Mark Brown wrote:
On Fri, Jan 16, 2015 at 01:55:14PM +0100, Michal Simek wrote:
Use standard num-cs binding property and setup
xlnx,num-ss-bits as deprecated.
Why? These properties mean different things - num-cs is a bit confused
and is the total number
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v2:
- move timer out of amba_apu bus because it is not on bus
Reported by Mark
- FIC GICC and GICV addresses
Hi Nicolas,
On 03/05/2015 02:04 PM, Michal Simek wrote:
From: Punnaiah Choudary Kalluri punnaiah.choudary.kall...@xilinx.com
Include multi queue support for the ethernet IP version in xilinx ZynqMP
SoC.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal
bit value limit.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/cadence/macb.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb.h
b/drivers/net/ethernet
Hi Thomas,
On 03/05/2015 03:03 PM, Thomas Petazzoni wrote:
Dear Michal Simek,
On Thu, 5 Mar 2015 14:53:34 +0100, Michal Simek wrote:
+pmu {
+compatible = arm,armv8-pmuv3;
+interrupts = 0 143 4,
+ 0 144 4,
+ 0
On 03/04/2015 10:28 AM, Nielsen, David Marqvar wrote:
Prevent auto-enabling of IRQ - the firmware should do this when ready
Signed-off-by: David Marqvar Nielsen david.niel...@cobham.com
---
drivers/remoteproc/zynq_remoteproc.c | 2 ++
1 file changed, 2 insertions(+)
please ignore this
Hi Marc,
On 03/05/2015 03:05 PM, Marc Zyngier wrote:
Hi Michal,
On 05/03/15 13:53, Michal Simek wrote:
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v2
a syscall/trap */
Looks reasonable and I have also tested it.
I have fixed subject, coding style and I have create one more
patch to fix that coding style issue.
The patches should be in linux-next.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0
From: Nathan Rossi nathan.ro...@xilinx.com
When building specific DTBs out of the kernel tree the vendor subdirs
(boot/dts/vendor) are not created, ensure that they are before
building the DTB.
Signed-off-by: Nathan Rossi nathan.ro...@xilinx.com
Signed-off-by: Michal Simek michal.si
From: Punnaiah Choudary Kalluri punnaiah.choudary.kall...@xilinx.com
Include multi queue support for the ethernet IP version in xilinx ZynqMP
SoC.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/cadence
From: Punnaiah Choudary Kalluri punnaiah.choudary.kall...@xilinx.com
ZynqMP soc has single interrupt for all the queue events. So,
passing the IRQF_SHARED flag for interrupt registration call.
Signed-off-by: Punnaiah Choudary Kalluri punn...@xilinx.com
Signed-off-by: Michal Simek michal.si
Use standard num-cs binding property and setup
xlnx,num-ss-bits as deprecated.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/spi/spi-xilinx.c | 11 +--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
From: Peter Crosthwaite peter.crosthwa...@xilinx.com
Modern TTC implementations can extend the timer width to 32 bit. This
feature is not self identifying so the driver needs to be made aware
via device tree.
Signed-off-by: Peter Crosthwaite peter.crosthwa...@xilinx.com
Signed-off-by: Michal
Remove Kconfig dependency and enable driver for
all ARCHs.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
Changes in v2:
- Remove ARCH checking reported by
Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com
- Change patch
Hi Andrew,
On 12/11/2014 10:00 AM, Michal Simek wrote:
It is better to use macros which are already available
because then there is just one location which needs to be change.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
FYI: Fengguang's testing system doesn't show any build
,
- cpuinfo.pvr_user1,
- cpuinfo.pvr_user2);
+ seq_printf(m, Page size:\t%lu\n, PAGE_SIZE);
- count += seq_printf(m, Page size:\t%lu\n, PAGE_SIZE);
return 0;
}
Acked-by: Michal Simek mon...@monstr.eu
Do you want to add it to microblaze next
Add device tree binding documentation for the Microblaze remoteproc
on Xilinx Zynq.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
Changes in v2:
- Applied changed reported by Mark Rutland here
https://lkml.org/lkml/2015/1/19/198
.../bindings/remoteproc/mb_remoteproc.txt
Hi Mark,
On 02/14/2015 06:35 AM, Mark Brown wrote:
On Wed, Feb 11, 2015 at 12:07:20PM +0100, Michal Simek wrote:
2015-01-16 13:55 GMT+01:00 Michal Simek michal.si...@xilinx.com:
Use standard num-cs binding property and setup
xlnx,num-ss-bits as deprecated.
Any update on this one
Xilinx Microblaze is placed in programmable logic on Xilinx
Zynq architecture. Driver requires specific HW setting
described in DT binding.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
Changes in v2:
- Rebase on 4.0-rc1
- remove DEBUG_SG dependency - Reported-by: Nathan Lynch
Hi Arun,
On 02/20/2015 12:45 PM, Arun Chandran wrote:
On Thu, Feb 19, 2015 at 5:52 PM, Michal Simek mon...@monstr.eu wrote:
On 02/18/2015 12:29 PM, Arun Chandran wrote:
This patch converts all __raw_readl and __raw_writel function calls
to their corresponding readl_relaxed and writel_relaxed
the patch via
git send-email with proper description and SoB line. Then I will look at it.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel
Hi Mark,
On 02/24/2015 07:38 PM, Mark Rutland wrote:
Hi Michal,
I have a few minor comments below, but generally this is looking like
one of the best dts submissions I've seen!
thanks appreciate it.
[...]
+/ {
+ model = ZynqMP EP108;
+
+ aliases {
+
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
arch/arm64/Kconfig | 5 +
arch/arm64/boot/dts/Makefile| 1 +
arch/arm64/boot/dts/xilinx
This driver is used on new Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index
On 02/24/2015 09:08 AM, Mark Brown wrote:
On Tue, Feb 24, 2015 at 08:44:01AM +0100, Michal Simek wrote:
This driver is used on new Xilinx ZynqMP SoC.
Why does this have an architecture dependence at all?
Let me push this to my repo and run Fenguang's system on it if there
is any build error
This driver is used on new Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
---
drivers/net/ethernet/cadence/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence
On 02/24/2015 03:42 PM, Rob Herring wrote:
On Tue, Feb 24, 2015 at 1:56 AM, Michal Simek michal.si...@xilinx.com wrote:
Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
On 02/24/2015 01:12 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
On Feb 24, 2015, at 3:45 PM, Michal Simek michal.si...@xilinx.com wrote:
This driver is used on new Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek michal.si...@xilinx.com
Acked-by: Sören Brinkmann soren.brinkm...@xilinx.com
On 02/24/2015 05:29 PM, Rob Herring wrote:
On Tue, Feb 24, 2015 at 8:58 AM, Michal Simek michal.si...@xilinx.com wrote:
On 02/24/2015 03:42 PM, Rob Herring wrote:
On Tue, Feb 24, 2015 at 1:56 AM, Michal Simek michal.si...@xilinx.com
wrote:
Initial version of device tree for Xilinx ZynqMP SoC
endian mode.
Signed-off-by: Arun Chandran achand...@mvista.com
---
This patch is tested on xilinx ZC702 evaluation board with
CONFIG_CPU_BIG_ENDIAN=y and booting NFS rootfs
Added on the fly IP endianness detection according to
comments from Michal Simek
when the CPU is configured in big endian mode.
Signed-off-by: Arun Chandran achand...@mvista.com
It seems okay:
Acked-by: Nicolas Ferre nicolas.fe...@atmel.com
Tested on Zynq zc702 on LE and BE.
Tested-by: Michal Simek michal.si...@xilinx.com
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng
mode.
Signed-off-by: Arun Chandran achand...@mvista.com
---
This patch is tested on xilinx ZC702 evaluation board with
CONFIG_CPU_BIG_ENDIAN=y and booting NFS rootfs
Added on the fly IP endianness detection according to
comments from Michal Simek.
---
---
drivers
)
and bridge to axi. Then depends on Linux kernel how IO functions are
implemented.
That's why it is hard to say yes/no.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt
[] = {
+static const struct of_device_id xemaclite_of_match[] = {
{ .compatible = xlnx,opb-ethernetlite-1.01.a, },
{ .compatible = xlnx,opb-ethernetlite-1.01.b, },
{ .compatible = xlnx,xps-ethernetlite-1.00.a, },
Acked-by: Michal Simek michal.si...@xilinx.com
Thanks,
Michal
Hi Greg,
On 04/13/2015 07:00 PM, Greg Kroah-Hartman wrote:
On Mon, Apr 13, 2015 at 04:35:27PM +0200, Michal Simek wrote:
Do not probe all serial drivers by of_serial.c which are using
device_type = serial; property. Only drivers which have valid
compatible strings listed in the driver should
On 04/13/2015 05:50 PM, Peter Hurley wrote:
[ + Arnd ]
Hi Michal,
On 04/13/2015 10:35 AM, Michal Simek wrote:
Do not probe all serial drivers by of_serial.c which are using
device_type = serial; property. Only drivers which have valid
compatible strings listed in the driver should
for xilinx_uartps and because
of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking
for irq with request_irq() EINVAL is returned.
Signed-off-by: Michal Simek michal.si...@xilinx.com
CC: sta...@vger.kernel.org
---
Changes in v2:
- Extend patch description
drivers/tty/serial
On 04/14/2015 09:38 AM, Greg Kroah-Hartman wrote:
On Tue, Apr 14, 2015 at 07:10:07AM +0200, Michal Simek wrote:
Hi Greg,
On 04/13/2015 07:00 PM, Greg Kroah-Hartman wrote:
On Mon, Apr 13, 2015 at 04:35:27PM +0200, Michal Simek wrote:
Do not probe all serial drivers by of_serial.c which
here should be also. Kbuild system just reported this
problem.
#include linux/of.h
For the rest
Tested-by: Michal Simek michal.si...@xilinx.com
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze
On 04/24/2015 09:24 PM, Guenter Roeck wrote:
Commit 937abe88aea3 (dmaengine: xilinx-dma: move header file to common
location) moved xilinx_dma.h to a common location but neglected to reflect
this move in all its users.
This causes compile errors for several builds.
Fix kernel-doc format:
- Add gpio-width description
- Remove additional inited variable description
- Add return value description - xgpio_remove
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/gpio/gpio-xilinx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff
Hi David,
On 05/06/2015 01:35 AM, David Miller wrote:
Series applied to net-next.
Thanks.
Next time, you should give an initial [PATCH 00/nn] posting
describing overall at a high level what the series is doing.
That way I can use that information in the commit message of
a merge
From: Michal Simek mon...@monstr.eu
Use one return statement instead of two to simplify the code.
Both are returning the same value.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions
On 05/07/2015 05:30 PM, Julia Lawall wrote:
On Thu, 7 May 2015, Michal Simek wrote:
From: Michal Simek mon...@monstr.eu
Use one return statement instead of two to simplify the code.
Both are returning the same value.
Signed-off-by: Michal Simek michal.si...@xilinx.com
The from should
Use one return statement instead of two to simplify the code.
Both are returning the same value.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
Changes in v2:
- Use the same SoB as sender address - Reported-by: Julia Lawall
drivers/net/ethernet/xilinx/ll_temac_main.c | 4 +---
1 file
On 05/11/2015 04:42 PM, Joe Perches wrote:
On Mon, 2015-05-11 at 16:05 +0200, Michal Simek wrote:
Use one return statement instead of two to simplify the code.
Both are returning the same value.
trivia and FYI:
But still correct right?
I think there are about 100 of these in kernel tree
On 05/11/2015 05:39 PM, Joe Perches wrote:
On Mon, 2015-05-11 at 17:26 +0200, Michal Simek wrote:
On 05/11/2015 04:42 PM, Joe Perches wrote:
On Mon, 2015-05-11 at 16:05 +0200, Michal Simek wrote:
Use one return statement instead of two to simplify the code.
Both are returning the same value
stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
b/drivers/net/ethernet/xilinx
From: Srikanth Thokala srikanth.thok...@xilinx.com
Synchronize names with other drivers
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 47 ---
1 file changed, 24
This patch remove kernel-doc warnings.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet.h | 6 +++-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 38 ++-
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 6
There is rule for network drivers with comments blocks
which is newly checked by checkpatch.pl script.
Let's fix it.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet.h | 93 ---
drivers/net/ethernet/xilinx
From: Srikanth Thokala srikanth.thok...@xilinx.com
Removed checkpatch.pl errors and warnings.
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++--
drivers/net
in the h/w
design.
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet.h | 9 ++---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 46 +++
2 files changed, 27
From: Srikanth Thokala srikanth.thok...@xilinx.com
This patch adds proper checks to handle the PHY-less case.
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +-
1 file
...@xilinx.com
Acked-by: Michal Simek michal.si...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
b/drivers/net
From: Srikanth Thokala srikanth.thok...@xilinx.com
Synchronize names with other drivers.
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 14 +++---
1 file changed, 7
From: Srikanth Thokala srikanth.thok...@xilinx.com
Use of_property_* calls
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 35 ++-
1 file changed, 15 insertions
are cleared. In this case its possible for the ISR to clear
an unhandled interrupt (leading to potential deadlock).
Signed-off-by: Peter Crosthwaite peter.crosthwa...@xilinx.com
Tested-by: Jason Wu hua...@xilinx.com
Acked-by: Michal Simek michal.si...@xilinx.com
Signed-off-by: Michal Simek michal.si
From: Srikanth Thokala srikanth.thok...@xilinx.com
use devm_* calls
Signed-off-by: Srikanth Thokala stho...@xilinx.com
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 54 +++
1 file changed, 27 insertions(+), 27
On 05/05/2015 03:57 PM, Joe Perches wrote:
On Tue, 2015-05-05 at 11:25 +0200, Michal Simek wrote:
From: Peter Crosthwaite peter.crosthwa...@xilinx.com
The AXI-DMA rx-delay interrupt can sometimes be triggered
when there are 0 outstanding packets received. This is due
to the fact
DMA allocates skb-len instead of headlen
which is used for DMA.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c
b/drivers/net
On 05/12/2015 08:03 AM, Julia Lawall wrote:
On Tue, 12 May 2015, Michal Simek wrote:
DMA allocates skb-len instead of headlen
which is used for DMA.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 4 ++--
1 file changed, 2
DMA allocates skb-len instead of headlen
which is used for DMA.
Signed-off-by: Michal Simek michal.si...@xilinx.com
---
Changes in v2:
- Align the later argument with the right side of the parenthesis
Reported-by: Julia Lawall julia.law...@lip6.fr
drivers/net/ethernet/xilinx/ll_temac_main.c
1001 - 1100 of 4230 matches
Mail list logo