Hi,
I'm testing out my raid by pulling the plug on one of the drives before
rebooting and I get an error.
when I plug the drive back in it boots just fine.
I get this message:
/dev/md5 unexpected inconsitancy
/dev/md5: the filesystem size (according to the superblock) is 4480119
blocks
the p
Hi,
got raid working, got lilo all set up, now how should I set up swap in
/etc/fstab?
I have 2 scsi drives set up as a raid1- this has / and /boot and the rest of
the system.
I also have an IDE drive for storage and backup.
all 3 drives have a partition set up to be swap
Right now swap is o
I'm right at the end of a similar process.
check the owner and permissions of /tmp (and other directories) on your raid
compare it to the original on the IDE drive. copying with graphical tools
like KDE will screw up the ownership and things like suid. I had problems
with that.
If your copied wi
on 5/30/00 6:52 PM, Michael wrote:
>> this brings me back to my original post in this thread. I get an
>> error when I try to specify the "real" device and the MBR does not
>> get written. do I have to stop the raid for the boot partition and
>> mount the partitions as individual sdx ? I w
Hi, I have a raid level 1 on 2 scsi drives and an IDE drive.
I'm trying to set MBR on all my drives so if the first one goes down the
system will still boot.
I followed advice from this list's archive and set up a lilo.conf file for
each drive:
lilo.conf.hda
lilo.conf.sda
lilo.conf.sdb
when I tr
n 2
> stage, with ramdisk and initrd, but *much more* complicated).
>
> HTH
>
> -TheAl
>
>> -Message d'origine-
>> De: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]De la part de Gavin Clark
>> Date: vendredi, 26. mai 2000 11:35
>> À: [EMA
I can't get the module aic7xxx to mount at startup.
could someone who has this working send me an example of thier
/etc/conf.modules file
I have tried:
alias eth0 eepro100
alias parport_lowlevel parport_pc
pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq
pre-install pcmcia_
