-5049
[EMAIL PROTECTED]
http://lo-lands.ml.org
> -Original Message-
> From: Mike Brodbelt [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, December 17, 1998 1:03 PM
> To: Chris Mauritz; [EMAIL PROTECTED]
> Cc: Glaza, Lorenz
> Subject: Re: multiple scsi with raid
>
Chris Mauritz wrote:
> > the DPT card is passed over because it has been assigned the same
> > resources. Linux is recognizing the DPT card but skipping for the above
> > reason. Can I do an append in the lilo.conf file to force it?
> > Thanks,
>
> You should be able to disable the integrate
[EMAIL PROTECTED]]
> Sent: Thursday, December 17, 1998 11:48 AM
> To: Glaza, Lorenz
> Cc: [EMAIL PROTECTED]
> Subject: Re: multiple scsi with raid
>
> > From [EMAIL PROTECTED] Thu Dec 17 13:37:24
> 1998
> >
> > I know this may be more of a hardware question t
> From [EMAIL PROTECTED] Thu Dec 17 15:15:04 1998
>
> > You should be able to disable the integrated SCSI controller from the
> > motherboard BIOS configuration utility (usually by hitting DEL at boot
> > time).
>
> I think that misses the point, I think the goal was to get both going
> in order
> You should be able to disable the integrated SCSI controller from the
> motherboard BIOS configuration utility (usually by hitting DEL at boot
> time).
I think that misses the point, I think the goal was to get both going
in order to spread an md-device across them for performance...
At least,
> From [EMAIL PROTECTED] Thu Dec 17 13:37:24 1998
>
> I know this may be more of a hardware question than a specific RAID
> question, but here goes. I just got a DPT RAID controller, but my
> motherboard has a built-in scsi controller. So I have two scsi
> controllers. My problem is that I hav
I know this may be more of a hardware question than a specific RAID
question, but here goes. I just got a DPT RAID controller, but my
motherboard has a built-in scsi controller. So I have two scsi
controllers. My problem is that I have a resource conflict between the
RAID card and the on-board
