We set up some machines pretty much the same as you:
rackmount, with an ASUS P3B-F mainboard, 4 promise ultra-66 cards,
and 8 Seagate ST328040A drives within hot-swap boxes. We used
a Sliger case (C489-0814-PX-BK), in which everything fits, but
it is a bit tight to route the cables, even using
remo strotkamp wrote:
Hi raider out there,
We kept getting error messages under 'heavy' load ( RAID resync, e2fsck,
copying
a 2GB directory tree..) which looked as follows:
Jan 21 16:42:45 freshkills kernel: hdk: dma_intr: status=0x51 {
DriveReady SeekComplete Error }
Jan 21 16:42:45
On Mon, Jan 24, 2000 at 02:16:58PM +, Glenn McGrath wrote:
I have been having these sorts of problems for a fair while, my opinon (and
thats all it is) is that raid cant handle much more than 40MB/s,
irespective of your setup, i think theres some other limiting factor
I've seen 60MB/s
Hi raiders again,
I have been having these sorts of problems for a fair while, my opinon (and
thats all it is) is that raid cant handle much more than 40MB/s,
irespective of your setup, i think theres some other limiting factor
Ive gotten ~35MB/s with 3 udma33 drives, each its own
Hi raider out there,
We have a fileserver with software RAID-5 here. It's a rackmountable
case
with 1 hardisk for the OS on one of the two onboard IDE controllers and
8
DNJA 20GB harddisk in CRU Dataport V cases connected to 4 Promise Ultra
66
cards (each has 2 buses).
So we installed a RAID5
