On Wednesday 11 June 2003 09:19 pm, Eric Nelson wrote:
> > Is 600KB/s during isochronous xfers? Using a PCI based USB host the best
>
> I've
>
> > seen for bulk xfers with the Dell Axim PDA is 200KB/sec.
>
> No. ATL transfers via an ethernet device from a Linux PC, of course :).
Have you tested
> Is 600KB/s during isochronous xfers? Using a PCI based USB host the best
I've
> seen for bulk xfers with the Dell Axim PDA is 200KB/sec.
>
No. ATL transfers via an ethernet device from a Linux PC, of course :).
This is roughly the same performance we see using a laptop performing
the same trans
On Wed, Jun 11, 2003 at 02:56:10PM -0400, Alan Stern wrote:
> David:
>
> It turns out that the scsi error-handler threads aren't getting removed
> because of a problem in the driver model core caused by a recent patch. I
> believe the patch below will fix it. (I haven't tried this patch, but o
On Wed, Jun 11, 2003 at 02:46:43PM -0400, Alan Stern wrote:
> On Wed, 11 Jun 2003, Greg KH wrote:
>
> > > > Ok, I've update my tree to the -bk level, and it's at:
> > > > bk://kernel.bkbits.net/gregkh/usb/usb-2.5-bk
>
> > I'm starting to add in the -bk patches into my tree (that's the abo
David:
It turns out that the scsi error-handler threads aren't getting removed
because of a problem in the driver model core caused by a recent patch. I
believe the patch below will fix it. (I haven't tried this patch, but one
very similar to it worked okay.)
I've been trying to convince Gre
On Wed, 11 Jun 2003, Greg KH wrote:
> > > Ok, I've update my tree to the -bk level, and it's at:
> > > bk://kernel.bkbits.net/gregkh/usb/usb-2.5-bk
> I'm starting to add in the -bk patches into my tree (that's the above
> link) to keep up in sync with Linus's tree a bit easier due to the long
>
On Wed, Jun 11, 2003 at 06:58:25PM +0300, Romp wrote:
>
> HI,
>
> i know that the driver is not fully supported, but maybe the following
> helps a little to found out the problem.
>
> 1. PL2303 USB-Serial oops/crash with usb-uhci
> 2. using pl2303 causes crashes.
> - with "uhci.o" closing se
On Wed, 11 Jun 2003 [EMAIL PROTECTED] wrote:
> Hi Alan,
> I forgot, there is still the message "Device not ready. Make sure there is
> a disc in the drive." Is there a way to fix this?
I don't know; I didn't keep a copy of the kernel logs you sent.
But if the device doesn't work right and you c
> > We don't include ones, but the hotplug scripts we ship will use
> > the USB one if they it's there (the pci one is commented out,
> > sorry.)
>
> what values do they contain? It seems hotplug can perfectly work without
> them.
Whatever someone wants, I suppose. We just use the stock scripts t
On Wed, Jun 11, 2003 at 09:51:41AM -0400, Alan Stern wrote:
> On Tue, 10 Jun 2003, Greg KH wrote:
>
> > Ok, I've update my tree to the -bk level, and it's at:
> > bk://kernel.bkbits.net/gregkh/usb/usb-2.5-bk
> >
> > Let me know if anyone has any problems with it, that aren't related to
> > th
Hi Alan,
I forgot, there is still the message "Device not ready. Make sure there is
a disc in the drive." Is there a way to fix this?
Thank you! Bye, Joschua
> On Thu, 5 Jun 2003 [EMAIL PROTECTED] wrote:
>
> > Hi Alan!
> > Yes, you are right, I used kernel 2.4.20. The last days I tried to
> rep
Greg:
Not having heard any complaints about this patch, I'm submitting it. It
fixes a problem with the root hub status URB implementation; the timer
that controls the root hub polling was not getting reset during a PM
suspend.
Alan Stern
# This is a BitKeeper generated patch for the followi
On Wed, Jun 11, Bill Nottingham wrote:
> Olaf Hering ([EMAIL PROTECTED]) said:
> > > > But is anything except USB using that? This is an area it'd
> > > > be good to see RedHat, SuSE, and others agree, but I'd take
> > > > SuSE as a start.
> > >
> > > We just have the stock references to /etc/
Olaf Hering ([EMAIL PROTECTED]) said:
> > > But is anything except USB using that? This is an area it'd
> > > be good to see RedHat, SuSE, and others agree, but I'd take
> > > SuSE as a start.
> >
> > We just have the stock references to /etc/sysconfig/{pci,usb};
> > we don't use /etc/sysconfig/
HI,
i know that the driver is not fully supported, but maybe the following
helps a little to found out the problem.
1. PL2303 USB-Serial oops/crash with usb-uhci
2. using pl2303 causes crashes.
- with "uhci.o" closing serial port causes an "Oops" -
and driver is unusable until reboot (
> We're using the ISP1161 on a custom PXA-250 platform (200MHz)
> and seeing 600K+ bytes/second over an inexpensive 10-base-T card.
>
> We're also using a heavily patched driver for isochronous support and
> PXA-dma.
Is 600KB/s during isochronous xfers? Using a PCI based USB host the best I've
se
> I have the ISA/Linux eval card running on a Pentium 133. I'm seeing
sustained
> bulk tranfer rates (running FTP client on a PDA) of 20-90 Kbytes/sec,
> depending on direction. This seems very low. Can anyone confirm what I
should
> be seeing with this HC and driver? I'm running a 2.4.19 kernel wi
On Tue, 10 Jun 2003, Greg KH wrote:
> Ok, I've update my tree to the -bk level, and it's at:
> bk://kernel.bkbits.net/gregkh/usb/usb-2.5-bk
>
> Let me know if anyone has any problems with it, that aren't related to
> the -bk level of the kernel :)
Greg:
There are so many different trees f
I have the ISA/Linux eval card running on a Pentium 133. I'm seeing sustained
bulk tranfer rates (running FTP client on a PDA) of 20-90 Kbytes/sec,
depending on direction. This seems very low. Can anyone confirm what I should
be seeing with this HC and driver? I'm running a 2.4.19 kernel with th
hello, i'm looking for help upon usb hubs-
could you help me, or, may be, you know some links with extended info
about it (i have only usbspec, and wasn't able to find answer for my
problem)
i'm writing my own usb support for one project and trying to startup usb
hubs support now. for testing
On Tue 10 June 2003 23:12, Randy.Dunlap wrote:
>
> Hi Daniele,
Hi Randy, nice to see you (even if nice to hear you would be more appropriate ;) )
> Were you able to test this new code path? If so, how?
Well, that's a good question ...
because i don't know if there is any distro program that pla
21 matches
Mail list logo