Any other links to this three-wheeler? Looks minimalist, but fun.
-=Doug
- Original Message -
From: lyle sloan [EMAIL PROTECTED]
To: EM.net listserv@electricmotorcycles.net
Sent: Sunday, October 21, 2007 11:34 PM
Subject: [ElectricMotorcycles] more EM pics on Flickr
Electric
Are you familiar with the Vortex? http://vortexplans.com/
We have a large Yahoo group (shameless plug) for the vehicle and two on the
road (except the owner/builder of the one in NC just passed away after fighting
cancer). The plans set includes the electric mods/plans. The vehicle is
Wow. Mike when you kill 'em, you kill 'em dead as a hammer.
One of the things on my list to do after this course on Electric Machines is
over (next week is finals) is look over the Etek and analyse it more before
employing it. A PM motor is considered a special case of a separately
excited
To decompose this thread a little more...
A DC breaker is a safety device.
A DC disconnect is a switch.
It is similar to the old machinst adage You can drill on a mill, but you
shouldn't mill on a drill.
I had an site that regularly used a circuit breaker as a switch. It failed
prematurely
Apparently they use them only to burn up tires.
Tsk, tsk. grin
Was that a clipped low-budget promo?
- Original Message -
From: lyle sloan [EMAIL PROTECTED]
To: EM.net listserv@electricmotorcycles.net
Sent: Sunday, March 11, 2007 1:00 PM
Subject: [ElectricMotorcycles] Another Youtube
That Spec Anny sounds interesting. Are you trying to
have one operate on a computer? Or are you trying to
make a smaller version?
It is a modification of the Spectrum Analyzer from Kanga US
http://www.bright.net/~kanga/kanga/w7zoi/products/spectrum_analyzer.htm
I am limiting the bandwidth to
The software from Alltax works like a charm and both the other
terminal programs I'm using receive some data when the controller
first comes online. I think this is an 'I'm okay' signal the
controller sends when it first activates.
And...
The docs for RealTerm in particular seem to be
Ok, I bit the bullet and spent some hard earned eBay dollars on a new Etek
from Capt. America. (I hope none of his enemies come to exact revenge
grin). Does anyone have a dxf format of the motor? I will search around
more, but don't remember seeing one on the Briggs Stratton site. I found a
dxf
I thought you could just hook one up to a
standard 9 volt battery for programming. I tried this and don't get
the results I'm after. No lights and no communication to the PC.
What am I missing?
http://electricmotorcycles.net/modules/listserv/temp/img_2896_th.jpg
Seems like a resonable
Mike asked:
You speak German, Doug?
I studied it two years and had a german buddy in college in Florida. We both
had 69 Mustangs and would spend the weekend wrenching on them. I helped him
restore his BSA (don't remember which one, but a 250 single jug). We would
also buzz around on his dad's
10 matches
Mail list logo
