Hi all,
after haveing solved my TFTP-problem, error messges goes on. Now everything
with the kernel works fine. But then LTSP tries to insmod 8139too.o,
successfully.
After that following output appears:
eth0: RealTek RTL8139 Fast Ethernet at 0xc2807000, 00:c1:26:0b:1f:e8, IRQ 11
Running dhclie
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Sonntag, 15. Dezember 2002 10:41 schrieb
[EMAIL PROTECTED]:
Hi,
> startup script. Instead it's started from inetd or xinetd, depending on
> which you have installed.
inetd
> Check that you have inetd installed and running:
>
> rpm -q inetd
> ps
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Samstag, 14. Dezember 2002 21:47 schrieb Anselm Martin Hoffmeister:
Hi,
> GW> So I think tftpd is running. The hint for RedHat in the manual isn't
> for my GW> problem/system.
> Test it by running
> tftp localhost
> get /lts/vmlinuz-2.4.9-ltsp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am Samstag, 14. Dezember 2002 21:40 schrieb Anselm Martin Hoffmeister:
Hi,
> GW> shared-network WORKSTATIONS {
> GW> subnet 192.168.0.0 netmask 255.255.255.0 {
>
> And which range of addresses should be given to the client machines
> not defined
Antwort auf E-Mail von rob apodaca vom Freitag, 13. Dezember 2002 16:02
Hi,
> I believe that on your redhat system, tftp is controlled by
> xinetd...not initd.
You misunderstood something: I have a SuSE 8.1 machine running, and there's no
xinetd in /etc...
So the hint in the manual doen't conce
Hi,
sorry for bothering you again, but I have another problem on my SuSE 8.1
machine: Now DHCP works fine and the correct IPs are assigned. My client is
192.168.0.3 and my server 192.168.0.1.
Now LTSP stops when trying to load the kernel over network.
There's following message:
Loading 192.168.0.1
Hi,
after I installed LTSP on my SuSE 8.1 machine successfully, I have some
problems when trying to boot over my network.
I have a RTL8139 chip on my network-card, but no ROM. So I generated a
boot-ROM on www.rom-o-matic.net with a boot-header for disks. Then I wrote
this on a disk.
When I try
Hi,
is there any patch for using SuSE 8.1 with LTSP? When I try to start
install.sh I get the message, that SuSE 8.1 isn't supported, yet... but I
think there are not too much differences to the 8.0.
Thanks for your help!
--
Regards,
Gregor
http://linux.waluga.de
---