Yao,
Glad you have the correct modules working now. Can you explain why you are
employing the virtual disk driver with osd-zfs?
Capacities with Lustre-ZFS are estimated as zfs has functions like
compression that can change "capacity". As ZFS volumes are used and filled
as Lustre volumes their
Yao,
Either add the required kernel-{devel,debuginfo} so the osd-ldiskfs kernel
modules can be built against your kernel or remove lustre-all-dkms package
and replace with lustre-zfs-dkms and build ZFS only Lustre modules.
--Jeff
On Wed, Jun 28, 2023 at 8:45 AM Yao Weng wrote:
> I have error
I have error when installing lustre-all-dkms-2.15.3-1.el8.noarch
Loading new lustre-all-2.15.3 DKMS files...
Deprecated feature: REMAKE_INITRD (/usr/src/lustre-all-2.15.3/dkms.conf)
Building for 4.18.0-477.15.1.el8_8.x86_64 4.18.0-477.10.1.el8_lustre.x86_64
Building initial module for
Thank Jeff:
My installation steps are
step1: set local software provision (
https://wiki.lustre.org/Installing_the_Lustre_Software)
I download all rpm from
https://downloads.whamcloud.com/public/lustre/lustre-2.15.3/el8.8/server
Did you install the Lustre server RPMs?
Your email lists both server and client repositories.
Are you using DKMS? Did you install and built lustre-zfs-dkms or
lustre-all-dkms packages?
It doesn’t appear that you have any Lustre server kernel modules loaded,
which makes me suspect you didn’t
Hi:
I follow https://wiki.lustre.org/Installing_the_Lustre_Software to install
lustre.
My kernel is
$ uname -r
4.18.0-477.13.1.el8_8.x86_64
I install
https://downloads.whamcloud.com/public/lustre/lustre-2.15.3/el8.8/server
Hi
We are trying to make Ubuntu 22.04 as Lustre Client for x86_64
Lustre Version we are using is 2.15.1
But the packages available here are for amd64
https://downloads.whamcloud.com/public/lustre/lustre-2.15.1/ubuntu2204/client/
>From where can we get packages for Ubuntu?
Thanks and Regards
thank you for the prompt reply!
On 16/03/22 09:46, Shaun Tancheff via lustre-discuss wrote:
On 3/16/22 00:23, Bedosti Francesco wrote:
Dear all,
I'm trying to install Lustre client (version 2.15.0-RC2, but seems that older
releases give same results) on Debian 11 hosts with kernel version
On 3/16/22 00:23, Bedosti Francesco wrote:
Dear all,
I'm trying to install Lustre client (version 2.15.0-RC2, but seems
that older releases give same results) on Debian 11 hosts with kernel
version 5.10.0-12
I used Lustre extensively on Debian 10 without problems in the past.
The build of
15, 2022 8:23 PM
To: lustre-discuss@lists.lustre.org
Subject: [lustre-discuss] lustre installation on debian 11
Dear all,
I'm trying to install Lustre client (version 2.15.0-RC2, but seems that older
releases give same results) on Debian 11 hosts with kernel version 5.10.0-12 I
used Lustre e
Dear all,
I'm trying to install Lustre client (version 2.15.0-RC2, but seems that older
releases give same results) on Debian 11 hosts with kernel version 5.10.0-12
I used Lustre extensively on Debian 10 without problems in the past.
The build of packages goes well with:
sh autogen.sh &&
m/angebote-loesungen/hpc.html
-Ursprüngliche Nachricht-
Von: lustre-discuss Im
Auftrag von Thomas Roth
Gesendet: Donnerstag, 6. Februar 2020 15:51
An: lustre-discuss@lists.lustre.org
Betreff: Re: [lustre-discuss] LUSTRE - Installation on D
1 977-1750
Internet: https://www.uni-potsdam.de/de/zim/angebote-loesungen/hpc.html
-Ursprüngliche Nachricht-
Von: lustre-discuss Im Auftrag
von Thomas Roth
Gesendet: Donnerstag, 6. Februar 2020 15:51
An: lustre-discuss@lists.lustre.org
Betreff: Re: [lust
Auftrag von
Thomas Roth
Gesendet: Donnerstag, 6. Februar 2020 15:51
An: lustre-discuss@lists.lustre.org
Betreff: Re: [lustre-discuss] LUSTRE - Installation on DEBIAN 10.x
Hi Matthias,
last time we tried this (Debian Wheezy + Lustre 2.5) we had to use the Redhat
kernel _in_ Debian.
However
We're running 2.13.0 server on Ubuntu Bionic 18.04 with 4.15 kernel in
our test setup. Has been working without any real problems for a couple
of weeks. But it is a small test setup so...
For clients we have 2.10.7 from DDN on our production Ubuntu Xenial
systems (with HWE kernel so 4.15)
On
Hi Matthias,
last time we tried this (Debian Wheezy + Lustre 2.5) we had to use the Redhat
kernel _in_ Debian.
However, nowadays there is the patchless-ldiskfs-server, and of course the server based on ZFS, both of which would require only to compile the proper
modules.
My guess is that you
Hello everybody,
I am new here on this platform and I have a question about LUSTRE –
Installation on DEBIAN 10.x …..
It is possible to install this on this LINUX – Version & if yes: which version
of LUSTRE does it work and how?
Best regards….
Matthias Krawutschke, Dipl. Inf.
modprobe.d/lustre.conf
mount -t lustre [IP ADDRESS OF MGS SERVER]@tcp0:/ZFS01 /mnt/lustre
Hope this helps.
From: lustre-discuss [mailto:lustre-discuss-boun...@lists.lustre.org] On Behalf
Of Devendra Patil
Sent: Friday, January 27, 2017 5:06 AM
To: lustre-discuss@lists.lustre.org
Subject: [lustre-d
Hello,
I'm newbie to lustre. Currently I'm facing issue while installing lustre on
CentOs 7.2. Can anyone guide me which OS to use and compatible lustre
version for it.
Thank you,
Devendra Patil
___
lustre-discuss mailing list
You should probably be trying 2.4.x or 2.5.x available here:
https://wiki.hpdd.intel.com/display/PUB/Lustre+Releases
On Tue, Mar 4, 2014 at 2:40 AM, omar o...@nearinc.com wrote:
Dear community,
Has anyone installed Lustre on openSUSE 12.3 64-bit with kernel
3.7.10-1.28-dektop? If so, could
Dear community,
Has anyone installed Lustre on openSUSE 12.3 64-bit with kernel
3.7.10-1.28-dektop? If so, could you share the how-to so I can implement
it on my environment? I have been trying to install Lustre 1.8.7 with
the pre-compiled binaries, but I am unable to boot to the pre-compiled
I have a redhad linx5 running under VMWare. I tried to install Lustre 1.8.7
on that linux. I followed their tutorial
http://www.linuxjournal.com/content/lustre-distributed-filesystem?page=0,0
First I installed patched kernel and rebooted to make sure the new kernel
is loaded. Then I started to
Huh... :( Sorry to bug you guys again...
I am planning to make a fresh start now as nothing seems to have worked for
me. If you have any comments/feedback please share them.
I would like to confirm installation order before I make a fresh start. From
Arden's experience:
And is there any specific installation order for patchless client? Could
someone please share it with me?
-
CS.
On Wed, Jun 17, 2009 at 10:18 AM, Carlos Santana neu...@gmail.com wrote:
Huh... :( Sorry to bug you guys again...
I am planning to make a fresh start now as nothing seems to have
Sent: June 17, 2009 11:21 AM
To: lustre-discuss@lists.lustre.org
Subject: Re: [Lustre-discuss] Lustre installation and configuration
problems
And is there any specific installation order for patchless client? Could
someone please share it with me?
-
CS.
On Wed, Jun 17, 2009 at 10:18 AM
http://blogs.sun.com/manoj/entry/lustre_demo_flash
http://blogs.sun.com/manoj/entry/lustre_installation_multi_node
Carlos Santana wrote:
And is there any specific installation order for patchless client?
Could someone please share it with me?
-
CS.
On Wed, Jun 17, 2009 at 10:18 AM, Carlos
Carlos Santana wrote:
Thanks Cliff.
The depmod -a was successful before as well. I am using CentOS 5.2
box. Following are the packages installed:
[r...@localhost tmp]# rpm -qa | grep -i lustre
lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp
Carlos -
The installation procedures for Lustre 1.6 and 1.8 are the same. The
manual's installation procedure includes a table that shows which
packages to install on servers and clients (I've attached a PDF of the
table). The procedure also describes the installation order for packages
? If the later
are the client packages for linux somewhat redundant? When will the real
client .exe for windows become available?
Arden
--- On Wed, 6/17/09, Sheila Barthel sheila.bart...@sun.com wrote:
From: Sheila Barthel sheila.bart...@sun.com
Subject: Re: [Lustre-discuss] Lustre installation
-discuss] Lustre installation and configuration problems
To: Carlos Santana neu...@gmail.com
Cc: Cliff White cliff.wh...@sun.com, lustre-discuss@lists.lustre.org
Date: Wednesday, June 17, 2009, 1:08 PM
Carlos -
The installation procedures for Lustre 1.6 and 1.8 are the
same. The manual's
...@lists.lustre.org] On Behalf Of Carlos Santana
Sent: June 17, 2009 11:21 AM
To: lustre-discuss@lists.lustre.org
Subject: Re: [Lustre-discuss] Lustre installation and configuration problems
And is there any specific installation order for patchless client? Could
someone please share it with me
Subject: Re: [Lustre-discuss] Lustre installation and configuration problems
And is there any specific installation order for patchless client? Could
someone please share it with me?
-
CS.
On Wed, Jun 17, 2009 at 10:18 AM, Carlos Santana neu...@gmail.com wrote:
Huh... :( Sorry to bug you
Hope that helps as that order has worked for me many times.
Arden
--- On Mon, 6/15/09, Carlos Santana neu...@gmail.com wrote:
From: Carlos Santana neu...@gmail.com
Subject: [Lustre-discuss] Lustre installation and configuration problems
To: lustre-discuss@lists.lustre.org
Date
, 6/15/09, Carlos Santana neu...@gmail.com
mailto:neu...@gmail.com wrote:
From: Carlos Santana neu...@gmail.com mailto:neu...@gmail.com
Subject: [Lustre-discuss] Lustre installation and configuration
problems
To: lustre-discuss@lists.lustre.org
mailto:lustre-discuss
Thanks Kevin..
I am referring to 1.8 manual, but I was also referring to HowTo page on wiki
which seems to be for 1.6. The HowTo page
http://wiki.lustre.org/index.php/Lustre_Howto#Using_Supplied_Configuration_Toolsmentions
abt lmc, lconf, and lctl.
The modules are installed in the right place.
Carlos Santana wrote:
Thanks Kevin..
Please read:
http://manual.lustre.org/manual/LustreManual16_HTML/ConfiguringLustre.html#50401328_pgfId-1289529
Those instructions are identical for 1.6 and 1.8.
For current lustre, only two commands are used for configuration.
mkfs.lustre and mount.
I was able to run lustre_rmmod and depmod successfully. The '$lctl
list_nids' returned the server ip address and interface (tcp0).
I tried to mount the file system on a remote client, but it failed with the
following message.
--- ---
[r...@localhost ~]# mount -t lustre 10.0.0...@tcp0:/lustre
Carlos Santana wrote:
I was able to run lustre_rmmod and depmod successfully. The '$lctl
list_nids' returned the server ip address and interface (tcp0).
I tried to mount the file system on a remote client, but it failed with
the following message.
--- ---
[r...@localhost ~]# mount -t
The lctlt ping and 'net up' failed with the following messages:
--- ---
[r...@localhost ~]# lctl ping 10.0.0.42
opening /dev/lnet failed: No such device
hint: the kernel modules may not be loaded
failed to ping 10.0.0...@tcp: No such device
[r...@localhost ~]# lctl network up
opening /dev/lnet
Carlos Santana wrote:
The lctlt ping and 'net up' failed with the following messages:
--- ---
[r...@localhost ~]# lctl ping 10.0.0.42
opening /dev/lnet failed: No such device
hint: the kernel modules may not be loaded
failed to ping 10.0.0...@tcp: No such device
[r...@localhost ~]# lctl
The '$ modprobe -l lustre*' did not show any module on a patchless client.
modprobe -v returns 'FATAL: Module lustre not found'.
How do I install a patchless client?
I have tried lustre-client-modules and lustre-client-ver rpm packages in
both sequences. Am I missing anything?
Thanks,
CS.
On
Thanks Cliff.
The depmod -a was successful before as well. I am using CentOS 5.2
box. Following are the packages installed:
[r...@localhost tmp]# rpm -qa | grep -i lustre
lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp
lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp
[r...@localhost tmp]#
Hello list,
I am struggling to install Lustre 1.8 on a CentOS 5.2 box. I am referring to
Lustre manual http://manual.lustre.org/index.php?title=Main_Page and Lustre
HowTo http://wiki.lustre.org/index.php/Lustre_Howto guide. Following is the
installation order and warning/error messages (if any)
many times.
Arden
--- On Mon, 6/15/09, Carlos Santana neu...@gmail.com wrote:
From: Carlos Santana neu...@gmail.com
Subject: [Lustre-discuss] Lustre installation and configuration problems
To: lustre-discuss@lists.lustre.org
Date: Monday, June 15, 2009, 2:07 PM
Hello list,
I am struggling
44 matches
Mail list logo