do, quite a joy.
Anthony
- Message d'origine
De : howard posner
À : Lute List
Envoyé le : Ven 14 janvier 2011, 7h 04min 46s
Objet : [LUTE] Re: New to the list
> On Jan 13, 2011, at 9:08 PM, Claudia Funder wrote:
>
>> For last few days I haven't been able to tur
lute-...@cs.dartmouth.edu [mailto:lute-...@cs.dartmouth.edu] On Behalf
Of howard posner
Sent: Friday, January 14, 2011 6:21 PM
To: Lute List
Subject: [LUTE] Re: New to the list
On Jan 14, 2011, at 10:16 AM, Roland Hayes wrote:
> So if you won't get a good turner soon, or if you're still afraid of
bre
Hi All,
While on the subject of those pesky pegs I thought I might pass on some
ideas about tuning:
1. Think about the tension on the string between the peg and the nut as
well as the tension between the nut and the bridge. Ideally they should
be equal. So, when you want to raise the pitch
Mark Seifert wrote:
I have used chalk for decades to stop my pegs from
slipping, and am worried now that I am doing something stupid,
especially after the instructor mentioned above vehemently and
without further comment rejected a chalk stick which I offered him
when his own peg slipped just be
Dear Claudia,
Looking ahead 6 months to a drier future down under, and borrowing trouble
therefrom, may I share experience of having just the opposite problem in bone
dry semiarid inland southern CA. At the LSA meeting someone whipped out a
plastic peg tuner and I asked "what the h is that?" T
risk of breaking the peg, or, worse, the
pegbox.
g
Original-Nachricht
> Datum: Fri, 14 Jan 2011 10:04:21 -0800
> Von: Stephen Fryer
> An: lute@cs.dartmouth.edu
> Betreff: [LUTE] Re: New to the list
> On 14/01/2011 8:43 AM, Edward Mast wrote:
> > When I rec
On Jan 14, 2011, at 10:16 AM, Roland Hayes wrote:
> So if you won't get a good turner soon, or if you're still afraid of breaking
> the peg, you could try this instead, or let your builder do it for you
Of course, Claudia's builder would need arms 11,000 miles long to do this.
To get on or o
al Message-
From: lute-...@cs.dartmouth.edu [mailto:lute-...@cs.dartmouth.edu] On Behalf Of
Anthony Hind
Sent: Friday, January 14, 2011 12:46 PM
To: Claudia Funder; howardpos...@ca.rr.com
Cc: lute@cs.dartmouth.edu
Subject: [LUTE] Re: New to the list
"Now that it's summer I am also experienci
On 14/01/2011 8:43 AM, Edward Mast wrote:
When I received a lute that had sticking pegs (it hadn't been played
in a long while) I didn't want to order and then wait for a peg winder.
I used pliers. Two caveats, though: put enough tape on the jaws to keep
them from marring the pegs, and be careful
n they work well, as mine usually do, quite a joy.
Anthony
- Message d'origine
De : howard posner
À : Lute List
Envoyé le : Ven 14 janvier 2011, 7h 04min 46s
Objet : [LUTE] Re: New to the list
> On Jan 13, 2011, at 9:08 PM, Claudia Funder wrote:
>
>> For last few days I
When I received a lute that had sticking pegs (it hadn't been played in a long
while) I didn't want to order and then wait for a peg winder. I used pliers.
Two caveats, though: put enough tape on the jaws to keep them from marring the
pegs, and be careful not to let the pliers slip, fall and
a safer option than mine.
Helen
-Original Message-
From: Margaret Munck
Sent: 14 January 2011 10:30
To: Claudia Funder
Cc: lute@cs.dartmouth.edu
Subject: [LUTE] Re: New to the list
Stephen Gottlieb offers a peg turner here:
[1]http://www.editor.net/lutemaker/a
those
pegs!
Helen
-Original Message-
From: Margaret Munck
Sent: 14 January 2011 10:30
To: Claudia Funder
Cc: lute@cs.dartmouth.edu
Subject: [LUTE] Re: New to the list
Stephen Gottlieb offers a peg turner here:
[1]http://www.editor.net/lutemaker/accessories.html
$
"Occasionall
Stephen Gottlieb offers a peg turner here:
[1]http://www.editor.net/lutemaker/accessories.html
$
"Occasionally pegs are very stiff, or simply a little small, and a peg
turner is a useful accessory. This is a very simple tool, a turned
wooden handle with a leather padded slot for t
Welcome, Claudia.
Peg turners are fine as a way of protecting your fingers in the course
of everyday tuning, but I worry about their use as a violent solution
for sticking pegs. Apart from breaking the pegs, you could (even more
expensively) break the pegbox as well. I think once your pegs h
Dear Claudia,
with compassion I have followed the weather problems in Australia -
slowly but steadily one asks oneself what will happen if the 2 degrees
additional earth warming that seem to be accepted as inevitable among
the world leaders and others have occurred soon in the futur
> On Jan 13, 2011, at 9:08 PM, Claudia Funder wrote:
>
>> For last few days I haven't been able to turn the pegs at all. I've tried
>> the heat/drying technique suggested but given it hasn't really helped.
>> (Actually, I might try a hair dryerHmm)
>
>
> Welcome, Claudia. I hope you unde
uot;
Sent: Thursday, March 23, 2006 3:47 AM
Subject: [LUTE] Re: New to the List
> dear rob -
>
> welcome to the list - a pleasure to read your
> introductory letter.
>
> your "clean shop" reference brought this to mind:
>
> http://www.mikeouds.com/messageboard/viewthre
> your "clean shop" reference brought this to mind:
>
> http://www.mikeouds.com/messageboard/viewthread.php?tid=3497
>
:-) I especially love the smile on the man's face. One happy guy!
Brings to mind a certain workshop in London. Great lutes, great mess. Some
makers I know have very _very_ 'clean
dear rob -
welcome to the list - a pleasure to read your
introductory letter.
your "clean shop" reference brought this to mind:
http://www.mikeouds.com/messageboard/viewthread.php?tid=3497
i don't know if you're interested in ouds or not but
the luthier (mohamed fadel) shown seated amongst the
On Thursday 23 March 2006 03:34, Rob Dorsey wrote:
> I have two lutes Bob built for me, a 13 crs Dieffopruchar style at 76cm and
> a 140/76cm Edlinger style theorbo. This theorbo is perhaps one of Bob's
> most spectacular instruments and we collaborated on the design. It is in
> ebony with ivory sp
Dear Rob
Welcome to the club, I thinks you'll enjoy it here, and I'm sure we can all
learn something from your lute making experience.
David
David van Ooijen
Email: [EMAIL PROTECTED]
Http://www.davidvanooijen.nl
-
22 matches
Mail list logo
