Lars Gullik Bjønnes wrote:
Edwin Leuven [EMAIL PROTECTED] writes:
| is that it gets inserted with silly lines
Why are they silly?
i think that nobody uses line formatting like this. like paul the first
thing i do after inserting a table is selecting the whole thing and
unset all the lines.
Georg == Georg Baum [EMAIL PROTECTED] writes:
Georg Am Donnerstag, 1. Juni 2006 20:57 schrieb Peter Kümmel:
I haven't found a Makefile.am in /intl so I've done it like the
scon script.
Georg My mistake. I thought you were talking about a file in
Georg src/support. I have no idea about intl/.
Bo Peng wrote:
Hi, Peter, Abdel,
Please think a bit about what to include in the msvc project file(s).
A huge all-files-in project does not sound too clever.
Bo
Here i have a solution (.sln) with 10 (no itnl atm) projects:
the nine libraries (4 boost, support, controllers)
and
Bo Peng wrote:
Done.
Great. Then you will see intl support in scons/msvc.
config.h:
#if defined(MAKE_INTL_LIB) defined(_MSC_VER)
#define __attribute__(x)
#define inline
#define uintmax_t UINT_MAX
#endif
I think I was missing the define inline one.
Cheers,
Bo
inline it's
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
Great! On XP with correctly generated manifest files?
I'll test it.
There is one BIG change. namely, I am trying to use the glob module to
find source files, instead of listing all filenames. The
Martin Vermeer wrote:
Hmmm. Could this again be one of those cursor remains hanging in
mid-air things?
You replace a word (say, 5 characters) by an inset, i.e. a single
character. The cell length is reduced by 4. Should the cursor.pos() be
reset?
This sounds at least like a sensible
On Thursday 01 June 2006 21:53, Martin Vermeer wrote:
I remember that you had to log out and in again after installing qt for
the first time.
I would expect only to be necessary to start a new shell where those
environment variables will be read.
Garst did you succeed compiling 1.3.7?
On Friday 02 June 2006 07:10, Edwin Leuven wrote:
Lars Gullik Bjønnes wrote:
Edwin Leuven [EMAIL PROTECTED] writes:
| is that it gets inserted with silly lines
Why are they silly?
i think that nobody uses line formatting like this. like paul the first
thing i do after inserting a table
Paul A. Rubin [EMAIL PROTECTED] writes:
| Lars Gullik Bjønnes wrote:
| Edwin Leuven [EMAIL PROTECTED] writes:
| | is that it gets inserted with silly lines
| Why are they silly?
|
| I think it's generally considered bad form to have many horizontal
| lines, or *any* vertical lines, in a
Bo Peng [EMAIL PROTECTED] writes:
| Please test the attached patch. msvc2005 works here, with intl support.
|
| There is one BIG change. namely, I am trying to use the glob module to
| find source files, instead of listing all filenames. The performance
| penalty should not be noticable. This
Lars Gullik Bjønnes wrote:
Note that I am not against this change, I just want us to be aware of
implications and have well founded reasons for the change.
That said, IMHO we should make the behaviour in LyX as close as
possible to what you get from using the LaTeX styles/classes manually.
So
Peter Kümmel wrote:
Have you dropped the os/2 file from the source list?
+source = globSource(dir = env.subst('$TOP_SRC_DIR/intl'), pattern = '*.c',
+ exclude = ['vasnprintf.c', 'printf-parse.c', 'printf-args.c',
'os2compat.c'],
+ build_dir = '$BUILDDIR/intl')
Peter Kümmel wrote:
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
Great! On XP with correctly generated manifest files?
I'll test it.
I got this error:
Warning: Can not locate any spell checker
Checking for the number of args for mkdir... one
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and make use of the new features.
Angus, can
Peter Kümmel wrote:
Have you dropped the os/2 file from the source list?
+source = globSource(dir = env.subst('$TOP_SRC_DIR/intl'), pattern = '*.c',
+ exclude = ['vasnprintf.c', 'printf-parse.c', 'printf-args.c',
'os2compat.c'],
+ build_dir = '$BUILDDIR/intl')
Very funky :)
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
There is one BIG change. namely, I am trying to use the glob module to
find source files, instead of listing all filenames. The performance
penalty should not be noticable. This change will allow me to add
Abdelrazak Younes wrote:
Hello,
I would like to put this in but I touched a tiny bit the other
frontends. Any objection?
As there is none, I am going to commit.
Thanks,
Abdel.
Peter Kümmel wrote:
Bo Peng wrote:
Hi, Peter, Abdel,
Please think a bit about what to include in the msvc project file(s).
A huge all-files-in project does not sound too clever.
Bo
Here i have a solution (.sln) with 10 (no itnl atm) projects:
the nine libraries (4 boost, support,
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
There is one BIG change. namely, I am trying to use the glob module to
find source files, instead of listing all filenames. The performance
penalty should not be noticable. This change will allow me to add
Quoting Bo Peng [EMAIL PROTECTED]:
No AFAIK, this is a MSVC2005 feature.
I am
worried about the existence of QtXXX.dll.manifest. qt-mt.dll.manifest
for all the Q../Free qt3/qt4 compiled with msvc2003/2005.
mscv2003 will not generate a manifest, I guess.
You mean if I used my old
Abdelrazak == Abdelrazak Younes [EMAIL PROTECTED] writes:
Abdelrazak Abdelrazak Younes wrote:
Hello,
I would like to put this in but I touched a tiny bit the other
frontends. Any objection?
Abdelrazak As there is none, I am going to commit.
Since you are complaining: what do you gain by
Angus Leeming wrote:
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and make use of the new
Jean-Marc Lasgouttes wrote:
Abdelrazak == Abdelrazak Younes [EMAIL PROTECTED] writes:
Abdelrazak Abdelrazak Younes wrote:
Hello,
I would like to put this in but I touched a tiny bit the other
frontends. Any objection?
Abdelrazak As there is none, I am going to commit.
Since you are
Abdelrazak Younes wrote:
And furthermore it get rid of a bug that I noticed sometimes with cursor
drawing. Namely that the trace of the former cursor remains after you
move it.
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the
Abdelrazak Younes wrote:
It is not that useful but it is cleaner code wise. Since the beginning
of my qt4 port I wondered why we needed to save the no cursor region
and restore it. With this patch I finally got rid of it by drawing the
cursor after the work-area and only if it is needed.
Build 20060602 is available and has been uploaded to incoming. Can you
move the files again JMarc?
Everything related the Aspell should now work fine. Dictionary
installation will also become easier once the script Angus is running
finished (just a single click to accept the license
Angus Leeming wrote:
Abdelrazak Younes wrote:
It is not that useful but it is cleaner code wise. Since the beginning
of my qt4 port I wondered why we needed to save the no cursor region
and restore it. With this patch I finally got rid of it by drawing the
cursor after the work-area and only
Edwin Leuven wrote:
Abdelrazak Younes wrote:
And furthermore it get rid of a bug that I noticed sometimes with
cursor drawing. Namely that the trace of the former cursor remains
after you move it.
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
Edwin Leuven wrote:
selecting with the mousing and letting it scroll down results in the
messages below. behavior is good though (no anomalies):
can't compare cursor and anchor in different insets
p: inset: 0x1e96d20 idx: 5 par: 0 pos: 1
q: inset: 0x1eade68 idx: 6 par: 0 pos: 0
I don't see
| Anyway, many people prefer to list source files explicitly. If you are
| one of them, you still get a chance to persuade me.
Not all files in a folder is part of a build.
(not even all source files...)
I know, that is why I have to have include and exclude options for the
globSource
I got this error:
Warning: Can not locate any spell checker
Checking for the number of args for mkdir... one
Checking for arg types for select... yes
IOError: [Errno 2] No such file or directory: '.\\src\\config.h':
File C:\sandbox\lyx\lyx-devel\development\scons\SConstruct, line 1067:
I agree with Angus that, even if this glob think is easier to maintain
than the explicit file listing, it's easy to have some temporary .C
files in there. So I would say that this is error prone.
That said, it is just a matter of education... if I know that I should
not put temporary files in
Edwin Leuven wrote:
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the end of the document the cursor would move to
the beginning etc
2. tabbing now works in tables (move to next cell) and didn't before
I have some
Joost == Joost Verburg [EMAIL PROTECTED] writes:
Joost Build 20060602 is available and has been uploaded to incoming.
Joost Can you move the files again JMarc?
Done:
lftp [EMAIL PROTECTED]:/home/ftp/pub/lyx/pre dir lyx-142svn-20060602.exe*
-rw-r--r--1 507 2002 8856899 Jun 02 15
Hello,
In the qt4 frontend, I would like to get rid of this wa_ptr that seems
do to do nothing at all in the Qt4 port. At least it doesn't do anything
in windows and X11. On Mac there is this special code in QWorkArea
constructor:
#ifdef Q_WS_MACX
wa_ptr = this;
#endif
Other than
Angus Leeming wrote:
Angus Leeming wrote:
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and
Abdelrazak Younes wrote:
AFAIS, wa_ptr is equivalent to this and is not used anywhere else.
So, can I remove it?
Sure. Feel free to experiment.
Angus
Abdelrazak Younes wrote:
AFAIS, wa_ptr is equivalent to this and is not used anywhere else.
It is used in lyxX11EventFilter and checkAppleEventForMissingParams (only in
OS X). Figuring out the reason why it is needed there is left as an
exercise for the reader.
So, can I remove it?
No. But
Abdelrazak Younes wrote:
Edwin Leuven wrote:
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the end of the document the cursor would move
to the beginning etc
2. tabbing now works in tables (move to next cell) and didn't before
This page: http://community.nethosted.co.uk/post_9972.html
explains why our web pages aren't validating with the W3C validator at the
moment and how to fix it.
Could someone change the DOCTYPE declaration to:
!DOCTYPE html PUBLIC -//W3C//DTD XHTML 1.1//EN
Hi,
I am running 1.4.2svn over gdb. I am using Fedora Core 5 up to date.
I noticed that everytime I redo some graphic displayed in lyx, lyx
crashes.
This means that lyx should be opened and should have rendered the graphic
before.
The backtrace is the following:
Program
Angus Leeming [EMAIL PROTECTED] writes:
| This page: http://community.nethosted.co.uk/post_9972.html
|
| explains why our web pages aren't validating with the W3C validator at the
| moment and how to fix it.
Better now?
--
Lgb
Lars Gullik Bjønnes [EMAIL PROTECTED] writes:
| This page: http://community.nethosted.co.uk/post_9972.html
| explains why our web pages aren't validating with the W3C validator at the
| moment and how to fix it.
Better now?
Certainly.
http://validator.w3.org/check?uri=http://www.lyx.org/
Am Donnerstag, 1. Juni 2006 12:10 schrieb Jean-Marc Lasgouttes:
Georg == Georg Baum [EMAIL PROTECTED] writes:
Georg I think it would be possible, but not easier than tweaking
Georg qt.m4.
Getting rid of AC_PATH_EXTRA (just keep it for xforms) would be nice...
That is not used in qt.m4.
Georg Baum [EMAIL PROTECTED] writes:
| Am Donnerstag, 1. Juni 2006 12:10 schrieb Jean-Marc Lasgouttes:
| Georg == Georg Baum [EMAIL PROTECTED] writes:
|
| Georg I think it would be possible, but not easier than tweaking
| Georg qt.m4.
|
| Getting rid of AC_PATH_EXTRA (just keep it for
Hi,
Attached please find a patch that generate the msvc project files. It
works like this
1. go to development/scons
You *can not* do scons -f development/scons/SConstruct.
2. scons whateveroptions all
This will build lyx, and generate project files
3. to test, remove build directory, open
Lars Gullik Bjønnes wrote:
Edwin Leuven <[EMAIL PROTECTED]> writes:
| is that it gets inserted with silly lines
Why are they silly?
i think that nobody uses line formatting like this. like paul the first
thing i do after inserting a table is selecting the whole thing and
unset all the lines.
> "Georg" == Georg Baum <[EMAIL PROTECTED]> writes:
Georg> Am Donnerstag, 1. Juni 2006 20:57 schrieb Peter Kümmel:
>> I haven't found a Makefile.am in /intl so I've done it like the
>> scon script.
Georg> My mistake. I thought you were talking about a file in
Georg> src/support. I have no
Bo Peng wrote:
> Hi, Peter, Abdel,
>
> Please think a bit about what to include in the msvc project file(s).
> A huge all-files-in project does not sound too clever.
>
> Bo
>
>
Here i have a solution (.sln) with 10 (no itnl atm) projects:
the nine libraries (4 boost, support,
Bo Peng wrote:
>> Done.
>
> Great. Then you will see intl support in scons/msvc.
>
>> config.h:
>>
>> #if defined(MAKE_INTL_LIB) && defined(_MSC_VER)
>> #define __attribute__(x)
>> #define inline
>> #define uintmax_t UINT_MAX
>> #endif
>
> I think I was missing the define inline one.
>
>
Bo Peng wrote:
> Please test the attached patch. msvc2005 works here, with intl support.
Great! On XP with correctly generated manifest files?
I'll test it.
> There is one BIG change. namely, I am trying to use the glob module to
> find source files, instead of listing all filenames. The
Martin Vermeer wrote:
> Hmmm. Could this again be one of those "cursor remains hanging in
> mid-air" things?
>
> You replace a word (say, 5 characters) by an inset, i.e. a single
> "character". The cell length is reduced by 4. Should the cursor.pos() be
> reset?
This sounds at least like a
On Thursday 01 June 2006 21:53, Martin Vermeer wrote:
>
> I remember that you had to log out and in again after installing qt for
> the first time.
I would expect only to be necessary to start a new shell where those
environment variables will be read.
Garst did you succeed compiling 1.3.7?
On Friday 02 June 2006 07:10, Edwin Leuven wrote:
> Lars Gullik Bjønnes wrote:
> > Edwin Leuven <[EMAIL PROTECTED]> writes:
> > | is that it gets inserted with silly lines
> >
> > Why are they silly?
>
> i think that nobody uses line formatting like this. like paul the first
> thing i do after
"Paul A. Rubin" <[EMAIL PROTECTED]> writes:
| Lars Gullik Bjønnes wrote:
| > Edwin Leuven <[EMAIL PROTECTED]> writes:
| > | is that it gets inserted with silly lines
| > Why are they silly?
|
| I think it's generally considered bad form to have many horizontal
| lines, or *any* vertical lines,
"Bo Peng" <[EMAIL PROTECTED]> writes:
| Please test the attached patch. msvc2005 works here, with intl support.
|
| There is one BIG change. namely, I am trying to use the glob module to
| find source files, instead of listing all filenames. The performance
| penalty should not be noticable.
Lars Gullik Bjønnes wrote:
Note that I am not against this change, I just want us to be aware of
implications and have well founded reasons for the change.
That said, IMHO we should make the behaviour in LyX as close as
possible to what you get from using the LaTeX styles/classes manually.
So
Peter Kümmel wrote:
> Have you dropped the os/2 file from the source list?
+source = globSource(dir = env.subst('$TOP_SRC_DIR/intl'), pattern = '*.c',
+ exclude = ['vasnprintf.c', 'printf-parse.c', 'printf-args.c',
'os2compat.c'],
+ build_dir = '$BUILDDIR/intl')
Peter Kümmel wrote:
> Bo Peng wrote:
>> Please test the attached patch. msvc2005 works here, with intl support.
>
> Great! On XP with correctly generated manifest files?
>
> I'll test it.
I got this error:
Warning: Can not locate any spell checker
Checking for the number of args for mkdir...
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and make use of the new features.
Angus, can
Peter Kümmel wrote:
Have you dropped the os/2 file from the source list?
+source = globSource(dir = env.subst('$TOP_SRC_DIR/intl'), pattern = '*.c',
+ exclude = ['vasnprintf.c', 'printf-parse.c', 'printf-args.c',
'os2compat.c'],
+ build_dir = '$BUILDDIR/intl')
Very funky :)
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
There is one BIG change. namely, I am trying to use the glob module to
find source files, instead of listing all filenames. The performance
penalty should not be noticable. This change will allow me to add
Abdelrazak Younes wrote:
Hello,
I would like to put this in but I touched a tiny bit the other
frontends. Any objection?
As there is none, I am going to commit.
Thanks,
Abdel.
Peter Kümmel wrote:
Bo Peng wrote:
Hi, Peter, Abdel,
Please think a bit about what to include in the msvc project file(s).
A huge all-files-in project does not sound too clever.
Bo
Here i have a solution (.sln) with 10 (no itnl atm) projects:
the nine libraries (4 boost, support,
Bo Peng wrote:
Please test the attached patch. msvc2005 works here, with intl support.
There is one BIG change. namely, I am trying to use the glob module to
find source files, instead of listing all filenames. The performance
penalty should not be noticable. This change will allow me to add
Quoting Bo Peng <[EMAIL PROTECTED]>:
> > No AFAIK, this is a MSVC2005 feature.
> > > I am
> > > worried about the existence of QtXXX.dll.manifest. qt-mt.dll.manifest
> > > for all the Q../Free qt3/qt4 compiled with msvc2003/2005.
> > mscv2003 will not generate a manifest, I guess.
>
> You mean if
> "Abdelrazak" == Abdelrazak Younes <[EMAIL PROTECTED]> writes:
Abdelrazak> Abdelrazak Younes wrote:
>> Hello,
>>
>> I would like to put this in but I touched a tiny bit the other
>> frontends. Any objection?
Abdelrazak> As there is none, I am going to commit.
Since you are complaining:
Angus Leeming wrote:
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and make use of the new
Jean-Marc Lasgouttes wrote:
"Abdelrazak" == Abdelrazak Younes <[EMAIL PROTECTED]> writes:
Abdelrazak> Abdelrazak Younes wrote:
Hello,
I would like to put this in but I touched a tiny bit the other
frontends. Any objection?
Abdelrazak> As there is none, I am going to commit.
Since you are
Abdelrazak Younes wrote:
And furthermore it get rid of a bug that I noticed sometimes with cursor
drawing. Namely that the trace of the former cursor remains after you
move it.
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the
Abdelrazak Younes wrote:
It is not that useful but it is cleaner code wise. Since the beginning
of my qt4 port I wondered why we needed to save the "no cursor" region
and restore it. With this patch I finally got rid of it by drawing the
cursor after the work-area and only if it is needed.
Build 20060602 is available and has been uploaded to incoming. Can you
move the files again JMarc?
Everything related the Aspell should now work fine. Dictionary
installation will also become easier once the script Angus is running
finished (just a single click to accept the license
Angus Leeming wrote:
Abdelrazak Younes wrote:
It is not that useful but it is cleaner code wise. Since the beginning
of my qt4 port I wondered why we needed to save the "no cursor" region
and restore it. With this patch I finally got rid of it by drawing the
cursor after the work-area and
Edwin Leuven wrote:
Abdelrazak Younes wrote:
And furthermore it get rid of a bug that I noticed sometimes with
cursor drawing. Namely that the trace of the former cursor remains
after you move it.
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
Edwin Leuven wrote:
selecting with the mousing and letting it scroll down results in the
messages below. behavior is good though (no anomalies):
can't compare cursor and anchor in different insets
p: inset: 0x1e96d20 idx: 5 par: 0 pos: 1
q: inset: 0x1eade68 idx: 6 par: 0 pos: 0
I don't see
| Anyway, many people prefer to list source files explicitly. If you are
| one of them, you still get a chance to persuade me.
Not all files in a folder is part of a build.
(not even all source files...)
I know, that is why I have to have include and exclude options for the
globSource
I got this error:
Warning: Can not locate any spell checker
Checking for the number of args for mkdir... one
Checking for arg types for select... yes
IOError: [Errno 2] No such file or directory: '.\\src\\config.h':
File "C:\sandbox\lyx\lyx-devel\development\scons\SConstruct", line 1067:
I agree with Angus that, even if this glob think is easier to maintain
than the explicit file listing, it's easy to have some temporary .C
files in there. So I would say that this is error prone.
That said, it is just a matter of education... if I know that I should
not put temporary files in
Edwin Leuven wrote:
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the end of the document the cursor would move to
the beginning etc
2. tabbing now works in tables (move to next cell) and didn't before
I have some
>>>>> "Joost" == Joost Verburg <[EMAIL PROTECTED]> writes:
Joost> Build 20060602 is available and has been uploaded to incoming.
Joost> Can you move the files again JMarc?
Done:
lftp [EMAIL PROTECTED]:/home/ftp/pub/lyx/pre> dir lyx-142svn-20060602.exe*
-r
Hello,
In the qt4 frontend, I would like to get rid of this wa_ptr that seems
do to do nothing at all in the Qt4 port. At least it doesn't do anything
in windows and X11. On Mac there is this special code in QWorkArea
constructor:
#ifdef Q_WS_MACX
wa_ptr = this;
#endif
Other than
Angus Leeming wrote:
Angus Leeming wrote:
Joost Verburg wrote:
A new installer for Aspell 0.6 data and dictionaries has been uploaded:
http://wiki.lyx.org/uploads/Windows/Installer/aspell6-wininstaller-src.tar.gz
The next version of the LyX installer will bundle this new Aspell
installer and
Abdelrazak Younes wrote:
AFAIS, wa_ptr is equivalent to "this" and is not used anywhere else.
So, can I remove it?
Sure. Feel free to experiment.
Angus
Abdelrazak Younes wrote:
> AFAIS, wa_ptr is equivalent to "this" and is not used anywhere else.
It is used in lyxX11EventFilter and checkAppleEventForMissingParams (only in
OS X). Figuring out the reason why it is needed there is left as an
exercise for the reader.
> So, can I remove it?
No.
Abdelrazak Younes wrote:
Edwin Leuven wrote:
other changes i see:
1. before the patch selecting with the mouse down was ill behaved
because after reaching the end of the document the cursor would move
to the beginning etc
2. tabbing now works in tables (move to next cell) and didn't before
This page: http://community.nethosted.co.uk/post_9972.html
explains why our web pages aren't validating with the W3C validator at the
moment and how to fix it.
Could someone change the DOCTYPE declaration to:
http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd;>
Regards,
Angus
Hi,
I am running 1.4.2svn over gdb. I am using Fedora Core 5 up to date.
I noticed that everytime I redo some graphic displayed in lyx, lyx
crashes.
This means that lyx should be opened and should have rendered the graphic
before.
The backtrace is the following:
Program
Angus Leeming <[EMAIL PROTECTED]> writes:
| This page: http://community.nethosted.co.uk/post_9972.html
|
| explains why our web pages aren't validating with the W3C validator at the
| moment and how to fix it.
Better now?
--
Lgb
Lars Gullik Bjønnes <[EMAIL PROTECTED]> writes:
> | This page: http://community.nethosted.co.uk/post_9972.html
> | explains why our web pages aren't validating with the W3C validator at the
> | moment and how to fix it.
> Better now?
Certainly.
Am Donnerstag, 1. Juni 2006 12:10 schrieb Jean-Marc Lasgouttes:
> > "Georg" == Georg Baum <[EMAIL PROTECTED]> writes:
>
> Georg> I think it would be possible, but not easier than tweaking
> Georg> qt.m4.
>
> Getting rid of AC_PATH_EXTRA (just keep it for xforms) would be nice...
That is
Georg Baum <[EMAIL PROTECTED]> writes:
| Am Donnerstag, 1. Juni 2006 12:10 schrieb Jean-Marc Lasgouttes:
| > > "Georg" == Georg Baum <[EMAIL PROTECTED]> writes:
| >
| > Georg> I think it would be possible, but not easier than tweaking
| > Georg> qt.m4.
| >
| > Getting rid of AC_PATH_EXTRA
Hi,
Attached please find a patch that generate the msvc project files. It
works like this
1. go to development/scons
You *can not* do scons -f development/scons/SConstruct.
2. scons whateveroptions all
This will build lyx, and generate project files
3. to test, remove build directory, open
92 matches
Mail list logo
