Date: Wed, 16 Jan 2002 23:49:33 -0800
From: Kayvan A. Sylvan [EMAIL PROTECTED]
To: Herbert Voss [EMAIL PROTECTED]
Cc: LyX Users [EMAIL PROTECTED]
Subject: Re: fancy header usage question
On Thu, Jan 17, 2002 at 07:50:01AM +0100, Herbert Voss wrote:
Kayvan A. Sylvan wrote:
Hi all,
I am
On Wed, 16 Jan 2002, Guenter Milde wrote:
Thanks Guenter and Jean-Pierre --- csv2lyx has done the trick for me on
the spreadsheet conversion to LyX. :-)
I've also got to get my perl problem figured out because it complains
about locale. I know this is ignorant but I haven't found yet exactly
Hello,
is there anybody who could tell where I can find the fontnames of fonts
that I can use with \dropping?
Thanks.
Holger
--
Der Krieg ist ein Massaker von Leuten, die sich nicht kennen,
zum Nutzen von Leuten, die sich kennen, aber nicht massakrieren.
La guerra es una masacre entre gente que
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
Thanks for any help
Holger
--
Der Krieg ist ein Massaker von Leuten, die sich nicht
I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
When I try to LaTeX my document, I get the following two problems:
! LaTeX Error: Command \c@lofdepth already defined.
Or name \end... illegal, see p.192 of the manual.
! LaTeX Error: Command \c@lotdepth
Kayvan == Kayvan A Sylvan [EMAIL PROTECTED] writes:
Kayvan On Tue, Jan 15, 2002 at 05:00:12PM -0800, M.V. Ramana wrote:
Hi,
I notice that the tgz (~5pm, 1/14) file for 1.1.6fix4 is more
recent than the srpm (9:48am, 1/14). Does that mean that the srpm
version has some bugs that were fixed
On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
Adjust the minipage width settings by right-mouse-button clicking
On Thu, Jan 17, 2002 at 12:19:04PM +0200, Tuukka Toivonen wrote:
I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
When I try to LaTeX my document, I get the following two problems:
! LaTeX Error: Command \c@lofdepth already defined.
Or name \end...
On Thu, 17 Jan 2002, Dekel Tsur wrote:
Use \usepackage[subfigure]{tocloft}
Thanks! It works now.
I suppose it wouldn't work with the older version of the
tocloft? Too bad, now the user is required to have correct
version of packages. Well, not a problem, nobody except
me should be able to
I tried this, and changed the Margin line to be Static instead of
Right_Address_Box. It did in fact move the address to the left
within LyX, but the DVI rendering is still on the right. Would I have
to change the .cls file that Matej was talking about in order to
change the output?
Thanks,
Ben
Torsdag 17. januar 2002 13:58, skreiv Ben Logan:
I tried this, and changed the Margin line to be Static instead of
Right_Address_Box. It did in fact move the address to the left
within LyX, but the DVI rendering is still on the right. Would I have
to change the .cls file that Matej was
Holger Warm wrote:
Hello,
is there anybody who could tell where I can find the fontnames of fonts
that I can use with \dropping?
why should there be a restriction?
Herbert
--
http://www.lyx.org/help/
Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
rpm --nodeps ...
HErbert
--
The current release 1.1.6fix4 now is available for Win32, too. As usual you
can get it at
http://www.fh-hannover.de/mbau/tim/hentschel/lyx/index.htm
Happy LyXing ;-)
Claus
I hope this is not too much of a FAQ!
I normally use LyX under Linux as my main tool for writing. For some reasons I have
also to use a notebook with w95 installed, and i was trying to install LyX in this
notebook. I installed Cygwin and all the other software required, following the very
On Thu, 17 Jan 2002, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
Adjust the minipage width settings by right-mouse-button clicking on
the [minipage]
On Thu, 17 Jan 2002, Dekel Tsur wrote:
On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
Thanks for any
On Thursday 17 January 2002 17:22, Kayvan A. Sylvan wrote:
On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why
Hi
I wanted to install unix binaries here of the latest
lyx release (1.1.6fix4), from
ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
but rpm stands for
redhat package manager
and unless one uses that linux version,
what can be used instead?
I have IRIX 6.5 here on SGIs.
thanks
Frederic
--
Hello all,
I have made a Slackware package of the 1.1.6fix4 available online at this URL:
http://www.alphacent.com/opensource/files/lyx-1.1.6fix4-pak.tgz
this package works on Slackware 8.0, just type
installpkg lyx-1.1.6fix4-pak.tgz, to install it.
on the page
Given the sorry state of XForms, it is a horrid UI toolkit.
Given the old state of Klyx.
Given my inability to get Tables to work 100% correct in Lyx all the time.
I've decided to dump it all and write raw tex files.
Guess what. It's not hard. No worse
Frederic Leymarie wrote:
I wanted to install unix binaries here of the latest
lyx release (1.1.6fix4), from
ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
but rpm stands for
redhat package manager
and unless one uses that linux version,
what can be used instead?
I have IRIX 6.5 here on
Date: Wed, 16 Jan 2002 23:49:33 -0800
From: Kayvan A. Sylvan [EMAIL PROTECTED]
To: Herbert Voss [EMAIL PROTECTED]
Cc: LyX Users [EMAIL PROTECTED]
Subject: Re: fancy header usage question
On Thu, Jan 17, 2002 at 07:50:01AM +0100, Herbert Voss wrote:
Kayvan A. Sylvan wrote:
Hi all,
I am
On Wed, 16 Jan 2002, Guenter Milde wrote:
Thanks Guenter and Jean-Pierre --- csv2lyx has done the trick for me on
the spreadsheet conversion to LyX. :-)
I've also got to get my perl problem figured out because it complains
about locale. I know this is ignorant but I haven't found yet exactly
Hello,
is there anybody who could tell where I can find the fontnames of fonts
that I can use with \dropping?
Thanks.
Holger
--
Der Krieg ist ein Massaker von Leuten, die sich nicht kennen,
zum Nutzen von Leuten, die sich kennen, aber nicht massakrieren.
La guerra es una masacre entre gente que
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
Thanks for any help
Holger
--
Der Krieg ist ein Massaker von Leuten, die sich nicht
I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
When I try to LaTeX my document, I get the following two problems:
! LaTeX Error: Command \c@lofdepth already defined.
Or name \end... illegal, see p.192 of the manual.
! LaTeX Error: Command \c@lotdepth
Kayvan == Kayvan A Sylvan [EMAIL PROTECTED] writes:
Kayvan On Tue, Jan 15, 2002 at 05:00:12PM -0800, M.V. Ramana wrote:
Hi,
I notice that the tgz (~5pm, 1/14) file for 1.1.6fix4 is more
recent than the srpm (9:48am, 1/14). Does that mean that the srpm
version has some bugs that were fixed
On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
Adjust the minipage width settings by right-mouse-button clicking
On Thu, Jan 17, 2002 at 12:19:04PM +0200, Tuukka Toivonen wrote:
I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
When I try to LaTeX my document, I get the following two problems:
! LaTeX Error: Command \c@lofdepth already defined.
Or name \end...
On Thu, 17 Jan 2002, Dekel Tsur wrote:
Use \usepackage[subfigure]{tocloft}
Thanks! It works now.
I suppose it wouldn't work with the older version of the
tocloft? Too bad, now the user is required to have correct
version of packages. Well, not a problem, nobody except
me should be able to
I tried this, and changed the Margin line to be Static instead of
Right_Address_Box. It did in fact move the address to the left
within LyX, but the DVI rendering is still on the right. Would I have
to change the .cls file that Matej was talking about in order to
change the output?
Thanks,
Ben
Torsdag 17. januar 2002 13:58, skreiv Ben Logan:
I tried this, and changed the Margin line to be Static instead of
Right_Address_Box. It did in fact move the address to the left
within LyX, but the DVI rendering is still on the right. Would I have
to change the .cls file that Matej was
Holger Warm wrote:
Hello,
is there anybody who could tell where I can find the fontnames of fonts
that I can use with \dropping?
why should there be a restriction?
Herbert
--
http://www.lyx.org/help/
Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
rpm --nodeps ...
HErbert
--
The current release 1.1.6fix4 now is available for Win32, too. As usual you
can get it at
http://www.fh-hannover.de/mbau/tim/hentschel/lyx/index.htm
Happy LyXing ;-)
Claus
I hope this is not too much of a FAQ!
I normally use LyX under Linux as my main tool for writing. For some reasons I have
also to use a notebook with w95 installed, and i was trying to install LyX in this
notebook. I installed Cygwin and all the other software required, following the very
On Thu, 17 Jan 2002, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
Adjust the minipage width settings by right-mouse-button clicking on
the [minipage]
On Thu, 17 Jan 2002, Dekel Tsur wrote:
On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
Insert two minipages next to each other. Do not press enter between
the two or you will start a new paragraph and the two minipages will
appear one under the other.
On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
Thanks for any
On Thursday 17 January 2002 17:22, Kayvan A. Sylvan wrote:
On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why
Hi
I wanted to install unix binaries here of the latest
lyx release (1.1.6fix4), from
ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
but rpm stands for
redhat package manager
and unless one uses that linux version,
what can be used instead?
I have IRIX 6.5 here on SGIs.
thanks
Frederic
--
Hello all,
I have made a Slackware package of the 1.1.6fix4 available online at this URL:
http://www.alphacent.com/opensource/files/lyx-1.1.6fix4-pak.tgz
this package works on Slackware 8.0, just type
installpkg lyx-1.1.6fix4-pak.tgz, to install it.
on the page
Given the sorry state of XForms, it is a horrid UI toolkit.
Given the old state of Klyx.
Given my inability to get Tables to work 100% correct in Lyx all the time.
I've decided to dump it all and write raw tex files.
Guess what. It's not hard. No worse
Frederic Leymarie wrote:
I wanted to install unix binaries here of the latest
lyx release (1.1.6fix4), from
ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
but rpm stands for
redhat package manager
and unless one uses that linux version,
what can be used instead?
I have IRIX 6.5 here on
>>Date: Wed, 16 Jan 2002 23:49:33 -0800
>>From: "Kayvan A. Sylvan" <[EMAIL PROTECTED]>
>>To: Herbert Voss <[EMAIL PROTECTED]>
>>Cc: LyX Users <[EMAIL PROTECTED]>
>>Subject: Re: fancy header usage question
>>
>>On Thu, Jan 17, 2002 at 07:50:01AM +0100, Herbert Voss wrote:
>>> Kayvan A. Sylvan
On Wed, 16 Jan 2002, Guenter Milde wrote:
Thanks Guenter and Jean-Pierre --- csv2lyx has done the trick for me on
the spreadsheet conversion to LyX. :-)
I've also got to get my perl problem figured out because it complains
about locale. I know this is ignorant but I haven't found yet exactly
Hello,
is there anybody who could tell where I can find the fontnames of fonts
that I can use with \dropping?
Thanks.
Holger
--
"Der Krieg ist ein Massaker von Leuten, die sich nicht kennen,
zum Nutzen von Leuten, die sich kennen, aber nicht massakrieren."
"La guerra es una masacre entre gente
Hi list,
wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
following messages;
tetex-xdvi is needed by lyx-1.1.6fix4-1
tetex-latex is needed (...)
Why didn't I have this problem before with fix3 ?
Thanks for any help
Holger
--
"Der Krieg ist ein Massaker von Leuten, die sich nicht
I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
When I try to LaTeX my document, I get the following two problems:
! LaTeX Error: Command \c@lofdepth already defined.
Or name \end... illegal, see p.192 of the manual.
! LaTeX Error: Command \c@lotdepth
> "Kayvan" == Kayvan A Sylvan <[EMAIL PROTECTED]> writes:
Kayvan> On Tue, Jan 15, 2002 at 05:00:12PM -0800, M.V. Ramana wrote:
>> Hi,
>>
>> I notice that the tgz (~5pm, 1/14) file for 1.1.6fix4 is more
>> recent than the srpm (9:48am, 1/14). Does that mean that the srpm
>> version has some
On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
>
> Insert two minipages next to each other. Do not press enter between
> the two or you will start a new paragraph and the two minipages will
> appear one under the other.
>
> Adjust the minipage width settings by right-mouse-button
On Thu, Jan 17, 2002 at 12:19:04PM +0200, Tuukka Toivonen wrote:
> I'm afraid this is LaTeX problem, not directly LyX.. anyway, here it goes.
> When I try to LaTeX my document, I get the following two problems:
>
> ! LaTeX Error: Command \c@lofdepth already defined.
>Or name
On Thu, 17 Jan 2002, Dekel Tsur wrote:
>Use \usepackage[subfigure]{tocloft}
Thanks! It works now.
I suppose it wouldn't work with the older version of the
tocloft? Too bad, now the user is required to have correct
version of packages. Well, not a problem, nobody except
me should be able to
I tried this, and changed the Margin line to be "Static" instead of
"Right_Address_Box". It did in fact move the address to the left
within LyX, but the DVI rendering is still on the right. Would I have
to change the .cls file that Matej was talking about in order to
change the output?
Thanks,
Torsdag 17. januar 2002 13:58, skreiv Ben Logan:
> I tried this, and changed the Margin line to be "Static" instead of
> "Right_Address_Box". It did in fact move the address to the left
> within LyX, but the DVI rendering is still on the right. Would I have
> to change the .cls file that Matej
Holger Warm wrote:
> Hello,
> is there anybody who could tell where I can find the fontnames of fonts
> that I can use with \dropping?
why should there be a restriction?
Herbert
--
http://www.lyx.org/help/
Holger Warm wrote:
> Hi list,
> wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
> following messages;
> tetex-xdvi is needed by lyx-1.1.6fix4-1
> tetex-latex is needed (...)
> Why didn't I have this problem before with fix3 ?
rpm --nodeps ...
HErbert
--
The current release 1.1.6fix4 now is available for Win32, too. As usual you
can get it at
http://www.fh-hannover.de/mbau/tim/hentschel/lyx/index.htm
Happy LyXing ;-)
Claus
I hope this is not too much of a FAQ!
I normally use LyX under Linux as my main tool for writing. For some reasons I have
also to use a notebook with w95 installed, and i was trying to install LyX in this
notebook. I installed Cygwin and all the other software required, following the very
On Thu, 17 Jan 2002, Allan Rae wrote:
>
> Insert two minipages next to each other. Do not press enter between
> the two or you will start a new paragraph and the two minipages will
> appear one under the other.
>
> Adjust the minipage width settings by right-mouse-button clicking on
> the
On Thu, 17 Jan 2002, Dekel Tsur wrote:
> On Thu, Jan 17, 2002 at 12:44:57PM +1000, Allan Rae wrote:
> >
> > Insert two minipages next to each other. Do not press enter between
> > the two or you will start a new paragraph and the two minipages will
> > appear one under the other.
> >
On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
> Hi list,
> wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
> following messages;
> tetex-xdvi is needed by lyx-1.1.6fix4-1
> tetex-latex is needed (...)
> Why didn't I have this problem before with fix3 ?
> Thanks for
On Thursday 17 January 2002 17:22, Kayvan A. Sylvan wrote:
> On Thu, Jan 17, 2002 at 10:18:30AM +0100, Holger Warm wrote:
> > Hi list,
> > wanted to install lyx1.1.6fix4-1.i386.rpm, but I always get the
> > following messages;
> > tetex-xdvi is needed by lyx-1.1.6fix4-1
> > tetex-latex is needed
Hi
I wanted to install unix binaries here of the latest
lyx release (1.1.6fix4), from
ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
but rpm stands for
"redhat package manager"
and unless one uses that linux version,
what can be used instead?
I have IRIX 6.5 here on SGIs.
thanks
Frederic
--
Hello all,
I have made a Slackware package of the 1.1.6fix4 available online at this URL:
http://www.alphacent.com/opensource/files/lyx-1.1.6fix4-pak.tgz
this package works on Slackware 8.0, just type
"installpkg lyx-1.1.6fix4-pak.tgz", to install it.
on the page
Given the sorry state of XForms, it is a horrid UI toolkit.
Given the old state of Klyx.
Given my inability to get Tables to work 100% correct in Lyx all the time.
I've decided to dump it all and write raw tex files.
Guess what. It's not hard. No worse
Frederic Leymarie wrote:
> I wanted to install unix binaries here of the latest
> lyx release (1.1.6fix4), from
> ftp://ftp.lyx.org/pub/lyx/bin/1.1.6fix4/
> but rpm stands for
> "redhat package manager"
> and unless one uses that linux version,
> what can be used instead?
>
> I have IRIX
69 matches
Mail list logo
