Uwe Stöhr wrote:
Rainer M Krug schrieb:
These URLs are entered via the URL command in the menue. As I don't
like the borders around the URLs, I used the package hyperref, and the
problems start: the URLs are now nicely formated in blue, but they
don't break at the end of a line, even if I
Bruce Pourciau wrote:
\begin{enumerate}[resume]
Currently, this is not yet possible without such changes as Richard describes.
LyX 1.5 will have the ability to insert optional arguments (a.k.a. Short
Title) to environments, as you can do now for commands (like section).
Jürgen
Jamie Faunt wrote:
For rhythmic and also standard notation however, I do
have occasional needs. I would really prefer to use typography rather
than bitmaps. So I was wondering if you or any other reader on this
list knew of any music notation packages that use or export to LaTeX
so that I
Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored by
different people (like Samba Unleashed), you probably couldn't do it as a
single file.
FYI, with latest 1.5, I can open a 1200 pages document (the UserGuide
copiedpasted 12 times) and type in it
Rainer M Krug schrieb:
Thanks - but if I create a pdf with pdflatex, then the second URL has no
linebreaks. Is there something wrong with my setup?
You use other page margins, so you have to readjust the hyphenation points.
regards Uwe
Rainer M Krug schrieb:
You use other page margins, so you have to readjust the hyphenation
points.
I must checked in the document properties - the page margins are set to
default.
On my system the default is A4, on yours probably letter. Just set hyphenation points at the regions
where
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the first
page, and the image is on the second.
This depends on the settings you use. I assume that you have a special titlepage setting or use a
special document class. Send a small LyX example file
On Mon, 29 Jan 2007, Tobias Krause wrote:
is there a way to search for a referenced bibtex source? Or do I have to
search for in the .lyx file with a text editor, go back to LyX and
search for the surrounding text?
I'm guessing the latter so I can't help you. However, I think you should
On Monday 29 January 2007 7:37:13 am Kenward Vaughan wrote:
On Sun, 2007-01-28 at 20:32 -0600, Les Denham wrote:
On Sunday 28 January 2007 18:55, Kenward Vaughan wrote:
Hello folks,
I have an older LyX file for my classes which I opened for the
semester, and cannot get the file to
On Mon, 29 Jan 2007 12:35:02 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the
first page, and the image is on the second.
This depends on the settings you use. I assume that you have a special
On Jan 28, 2007, at 10:44 AM, Stefano Franchi wrote:
1. Framemaker has the concept of a book: a multifile work to
which you can add chapters (and indexes, etc). Once you have a book
set up, you can find and replace across chapters, change the
formatting across the whole book, etc. This
Les Denham wrote:
Are you familiar with Lilypond (http://lilypond.org)? It produces
beautiful
results, and can be integrated with LaTeX. So putting it together with
Lyx should be practical, though I haven't tried it.
I'd recommend that, too. The upcoming LyX 1.4.4 will check for lilypond,
This can certainly be done with the koma-script classes. See also the
titlesec package. These will allow you to add arbitrary formatting
commands to set the section titles.
Also memoir:
\chapterstyle{hangnum}
this did not not touch (sub)sections at all.
pavel
On Jan 29, 2007, at 2:13 AM, Jürgen Spitzmüller wrote:
Bruce Pourciau wrote:
\begin{enumerate}[resume]
Currently, this is not yet possible without such changes as Richard
describes.
LyX 1.5 will have the ability to insert optional arguments (a.k.a.
Short
Title) to environments, as you
I have added a bibliography to a document which uses the Document
Class - Report (koma-script). Although the rest of the document is a
single column, the bibliography seems to be formatted as a two column.
I use the word seems, because only the right column is being used. The
left column is
Bruce Pourciau wrote:
So in contrast to the mdwlist package, there's no simple LyX way
(that is, a way requiring just a little ERT in a LyX file) to resume
a particular enumeration with the enumitem package? I'm not talking
about making it the global default behavior, but rather just
Pavel Sanda wrote:
\chapterstyle{hangnum}
this did not not touch (sub)sections at all.
It's called chapterstyle, after all ;-)
Jürgen
Hello everybody! I need to produce a line of mathematical text
resembling the one at
http://www.cpt.univ-mrs.fr/~mustatea/right.png .
What you see was produced in LaTeX by inserting graphics in an array,
a thing that apparently I cannot do with LyX. Instead, I chose to use
tables and even
In a recent message [EMAIL PROTECTED], Russell Davie
[EMAIL PROTECTED] wrote.
[...]
Hi Uwe,
No special settings, just the default vanilla article.
Its so I can send images of pages in a text to an instructor who works
a different uni to to one I borrow library books from.
cheers
Russell
On 27 Jan, 2007, at 5:54 PM, Uwe Stöhr wrote:
Declan O'Byrne schrieb:
I've been trying to get a way to insert some greek text into a
document.
Having installed the relevant bits from texlive, I tried putting
\usepackage[greek,british]{babel} into the preamble.
You don't need to do this
Alexandru Mustatea wrote:
Hello everybody! I need to produce a line of mathematical text
resembling the one at
http://www.cpt.univ-mrs.fr/~mustatea/right.png .
What you see was produced in LaTeX by inserting graphics in an array,
a thing that apparently I cannot do with LyX. Instead, I
Abdelrazak Younes wrote:
Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored
by different people (like Samba Unleashed), you probably couldn't do
it as a single file.
FYI, with latest 1.5, I can open a 1200 pages document (the UserGuide
copiedpasted 12
Hi,
I'm having a devil of a time making LyX distribute extra vertical
whitespace it is adding when it encounters a graphic in a 'proper'
style. Consider the following.
Document Class: book
Page Layout (Custom): Custom (11.25 x 8.75)
Page Margins (Custom): 1.25 x 1.25 x 1.25 x 1.25
Float
On Mon 29 Jan 2007, Christian Ridderström wrote:
On Mon, 29 Jan 2007, Tobias Krause wrote:
is there a way to search for a referenced bibtex source? Or do I
have to search for in the .lyx file with a text editor, go back to
LyX and search for the surrounding text?
I'm
Float placement in LaTeX is a black art.
The default float placement allows LaTeX to put figures in the places it
deems best considering the various page-breaking requirements. This is
not that unusual in books and articles: A figure might go at the top of
the page on which its referenced, etc.
Dave Jarvis wrote:
The book Entanglement by Amir D. Aczel does exactly the style that I
want. He references his images beforehand and sacrifices a bit of
whitespace at the bottom of the page if the images do not fit nicely.
However, the text is always flush with the graphic.
And, as I
This is in reply to Paul A. Rubin's request (sorry for breaking
the thread, email problem). The LaTeX code that produced the good
output is below. I also forgot to mention that I'm using LyX 1.4.3.
Now, the workaround would be to export to LaTeX and then hack the
resulting file manually, but
On Mon, 29 Jan 2007 12:35:02 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the
first page, and the image is on the second.
This depends on the settings you use. I assume that you have a special
Russell Davie schrieb:
No special settings, just the default vanilla article.
Why is this called vanilla?
Its so I can send images of pages in a text to an instructor who works a
different uni to to one I borrow library books from.
Everything works fine here, the image is correctly
Stefano Franchi schrieb:
That's a great solution I didn't know of. But the attached file doesn't
work for me. LyX does pass greek and english to the documentclass
declaration, but it does not insert appropriate babel declarations.
What do you need? You only need to load greek for babel when
On Mon, 29 Jan 2007 22:02:43 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
No special settings, just the default vanilla article.
Why is this called vanilla?
oh, I meant plain, as in default, eg with nothing in preamble. I didn't mean
to confuse you!
Its so I
Hello all,
I'm new to tex/latex/lyx but need to write papers in ACM and APA
formats. I see that the package texlive-publishers includes APA and ACM
document classes, and I have the package installed, but lyx does not see
those templates.
How can I use lyx to write APA and ACM papers? I also
LyX does have an APA layout, so you should be able to use it. Check to
make sure you do have the APA document class installed and that LaTeX
can see it (run texhash as root) and then reconfigure LyX (Tools
Reconfigure). You can use Tools Tex Info to check what LyX thinks is
there.
I don't see
I installed the texlive-publishers package recently on ubuntu-edgy and after
a ToolsReconfigure, LyX recognized both APA and ACM.
Bob Lounsbury
On 1/29/07, Richard Heck [EMAIL PROTECTED] wrote:
LyX does have an APA layout, so you should be able to use it. Check to
make sure you do have the
Sorry, I lied. I don't have ACM. Just APA.
On 1/29/07, Bob Lounsbury [EMAIL PROTECTED] wrote:
I installed the texlive-publishers package recently on ubuntu-edgy and
after a ToolsReconfigure, LyX recognized both APA and ACM.
Bob Lounsbury
On 1/29/07, Richard Heck [EMAIL PROTECTED] wrote:
Alexandru Mustatea wrote:
This is in reply to Paul A. Rubin's request (sorry for breaking
the thread, email problem). The LaTeX code that produced the good
output is below. I also forgot to mention that I'm using LyX 1.4.3.
Now, the workaround would be to export to LaTeX and then hack the
On 29 Jan, 2007, at 7:23 AM, William Adams wrote:
\documentclass[draft]{memoir}
\documentclass[final]{memoir}
Although the other issues aren't addressed AFAIK in LyX (yet),
they're as easily solved in LaTeX by using the right packages
appropriately.
Well, that is true by
On 28 Jan, 2007, at 6:21 PM, Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored
by
different people (like Samba Unleashed), you probably couldn't do it
as a
single file.
Well, I can tell you from very recent experience that even a relatively
short 250
Hi,
Anyone know how to convert a LyX file with many math equations to a
word file? Do I need to retype all those in-line math characters and
equations? Thank you in advance!!
bests,
yiwei
Hello,
Are there any known issues with math characters and texlive?
Under texlive and LyX 1.4.3 I opened a couple of chapters of my thesis and
some math characters were displayed incorrectly. For instance, rho was
displayed as 'ae' not a squirly 'p'. Because of this I uninstalled texlive
and
Bob Lounsbury wrote:
Hello,
Are there any known issues with math characters and texlive?
Under texlive and LyX 1.4.3 I opened a couple of chapters of my thesis and
some math characters were displayed incorrectly. For instance, rho was
displayed as 'ae' not a squirly 'p'.
I use texlive and
I'm not sure this will help, my son uses Lilypond. While he complains
about some difficulty, the program typesets in latex very easily, so
you may be able to use it to include your notation in Lyx. The only
two other programs he wants cost about $700.00. I installed Lilypond
for him from
On Mon, 2007-01-29 at 12:25 +, José Matos wrote:
On Monday 29 January 2007 7:37:13 am Kenward Vaughan wrote:
On Sun, 2007-01-28 at 20:32 -0600, Les Denham wrote:
On Sunday 28 January 2007 18:55, Kenward Vaughan wrote:
Hello folks,
I have an older LyX file for my classes which
Stefano Franchi wrote:
On 29 Jan, 2007, at 7:23 AM, William Adams wrote:
\documentclass[draft]{memoir}
\documentclass[final]{memoir}
Although the other issues aren't addressed AFAIK in LyX (yet),
they're as easily solved in LaTeX by using the right packages
appropriately.
Well, that is
Uwe Stöhr wrote:
Rainer M Krug schrieb:
These URLs are entered via the URL command in the menue. As I don't
like the borders around the URLs, I used the package hyperref, and the
problems start: the URLs are now nicely formated in blue, but they
don't break at the end of a line, even if I
Bruce Pourciau wrote:
\begin{enumerate}[resume]
Currently, this is not yet possible without such changes as Richard describes.
LyX 1.5 will have the ability to insert optional arguments (a.k.a. Short
Title) to environments, as you can do now for commands (like section).
Jürgen
Jamie Faunt wrote:
For rhythmic and also standard notation however, I do
have occasional needs. I would really prefer to use typography rather
than bitmaps. So I was wondering if you or any other reader on this
list knew of any music notation packages that use or export to LaTeX
so that I
Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored by
different people (like Samba Unleashed), you probably couldn't do it as a
single file.
FYI, with latest 1.5, I can open a 1200 pages document (the UserGuide
copiedpasted 12 times) and type in it
Rainer M Krug schrieb:
Thanks - but if I create a pdf with pdflatex, then the second URL has no
linebreaks. Is there something wrong with my setup?
You use other page margins, so you have to readjust the hyphenation points.
regards Uwe
Rainer M Krug schrieb:
You use other page margins, so you have to readjust the hyphenation
points.
I must checked in the document properties - the page margins are set to
default.
On my system the default is A4, on yours probably letter. Just set hyphenation points at the regions
where
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the first
page, and the image is on the second.
This depends on the settings you use. I assume that you have a special titlepage setting or use a
special document class. Send a small LyX example file
On Mon, 29 Jan 2007, Tobias Krause wrote:
is there a way to search for a referenced bibtex source? Or do I have to
search for in the .lyx file with a text editor, go back to LyX and
search for the surrounding text?
I'm guessing the latter so I can't help you. However, I think you should
On Monday 29 January 2007 7:37:13 am Kenward Vaughan wrote:
On Sun, 2007-01-28 at 20:32 -0600, Les Denham wrote:
On Sunday 28 January 2007 18:55, Kenward Vaughan wrote:
Hello folks,
I have an older LyX file for my classes which I opened for the
semester, and cannot get the file to
On Mon, 29 Jan 2007 12:35:02 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the
first page, and the image is on the second.
This depends on the settings you use. I assume that you have a special
On Jan 28, 2007, at 10:44 AM, Stefano Franchi wrote:
1. Framemaker has the concept of a book: a multifile work to
which you can add chapters (and indexes, etc). Once you have a book
set up, you can find and replace across chapters, change the
formatting across the whole book, etc. This
Les Denham wrote:
Are you familiar with Lilypond (http://lilypond.org)? It produces
beautiful
results, and can be integrated with LaTeX. So putting it together with
Lyx should be practical, though I haven't tried it.
I'd recommend that, too. The upcoming LyX 1.4.4 will check for lilypond,
This can certainly be done with the koma-script classes. See also the
titlesec package. These will allow you to add arbitrary formatting
commands to set the section titles.
Also memoir:
\chapterstyle{hangnum}
this did not not touch (sub)sections at all.
pavel
On Jan 29, 2007, at 2:13 AM, Jürgen Spitzmüller wrote:
Bruce Pourciau wrote:
\begin{enumerate}[resume]
Currently, this is not yet possible without such changes as Richard
describes.
LyX 1.5 will have the ability to insert optional arguments (a.k.a.
Short
Title) to environments, as you
I have added a bibliography to a document which uses the Document
Class - Report (koma-script). Although the rest of the document is a
single column, the bibliography seems to be formatted as a two column.
I use the word seems, because only the right column is being used. The
left column is
Bruce Pourciau wrote:
So in contrast to the mdwlist package, there's no simple LyX way
(that is, a way requiring just a little ERT in a LyX file) to resume
a particular enumeration with the enumitem package? I'm not talking
about making it the global default behavior, but rather just
Pavel Sanda wrote:
\chapterstyle{hangnum}
this did not not touch (sub)sections at all.
It's called chapterstyle, after all ;-)
Jürgen
Hello everybody! I need to produce a line of mathematical text
resembling the one at
http://www.cpt.univ-mrs.fr/~mustatea/right.png .
What you see was produced in LaTeX by inserting graphics in an array,
a thing that apparently I cannot do with LyX. Instead, I chose to use
tables and even
In a recent message [EMAIL PROTECTED], Russell Davie
[EMAIL PROTECTED] wrote.
[...]
Hi Uwe,
No special settings, just the default vanilla article.
Its so I can send images of pages in a text to an instructor who works
a different uni to to one I borrow library books from.
cheers
Russell
On 27 Jan, 2007, at 5:54 PM, Uwe Stöhr wrote:
Declan O'Byrne schrieb:
I've been trying to get a way to insert some greek text into a
document.
Having installed the relevant bits from texlive, I tried putting
\usepackage[greek,british]{babel} into the preamble.
You don't need to do this
Alexandru Mustatea wrote:
Hello everybody! I need to produce a line of mathematical text
resembling the one at
http://www.cpt.univ-mrs.fr/~mustatea/right.png .
What you see was produced in LaTeX by inserting graphics in an array,
a thing that apparently I cannot do with LyX. Instead, I
Abdelrazak Younes wrote:
Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored
by different people (like Samba Unleashed), you probably couldn't do
it as a single file.
FYI, with latest 1.5, I can open a 1200 pages document (the UserGuide
copiedpasted 12
Hi,
I'm having a devil of a time making LyX distribute extra vertical
whitespace it is adding when it encounters a graphic in a 'proper'
style. Consider the following.
Document Class: book
Page Layout (Custom): Custom (11.25 x 8.75)
Page Margins (Custom): 1.25 x 1.25 x 1.25 x 1.25
Float
On Mon 29 Jan 2007, Christian Ridderström wrote:
On Mon, 29 Jan 2007, Tobias Krause wrote:
is there a way to search for a referenced bibtex source? Or do I
have to search for in the .lyx file with a text editor, go back to
LyX and search for the surrounding text?
I'm
Float placement in LaTeX is a black art.
The default float placement allows LaTeX to put figures in the places it
deems best considering the various page-breaking requirements. This is
not that unusual in books and articles: A figure might go at the top of
the page on which its referenced, etc.
Dave Jarvis wrote:
The book Entanglement by Amir D. Aczel does exactly the style that I
want. He references his images beforehand and sacrifices a bit of
whitespace at the bottom of the page if the images do not fit nicely.
However, the text is always flush with the graphic.
And, as I
This is in reply to Paul A. Rubin's request (sorry for breaking
the thread, email problem). The LaTeX code that produced the good
output is below. I also forgot to mention that I'm using LyX 1.4.3.
Now, the workaround would be to export to LaTeX and then hack the
resulting file manually, but
On Mon, 29 Jan 2007 12:35:02 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the
first page, and the image is on the second.
This depends on the settings you use. I assume that you have a special
Russell Davie schrieb:
No special settings, just the default vanilla article.
Why is this called vanilla?
Its so I can send images of pages in a text to an instructor who works a
different uni to to one I borrow library books from.
Everything works fine here, the image is correctly
Stefano Franchi schrieb:
That's a great solution I didn't know of. But the attached file doesn't
work for me. LyX does pass greek and english to the documentclass
declaration, but it does not insert appropriate babel declarations.
What do you need? You only need to load greek for babel when
On Mon, 29 Jan 2007 22:02:43 +0100
Uwe Stöhr [EMAIL PROTECTED] wrote:
Russell Davie schrieb:
No special settings, just the default vanilla article.
Why is this called vanilla?
oh, I meant plain, as in default, eg with nothing in preamble. I didn't mean
to confuse you!
Its so I
Hello all,
I'm new to tex/latex/lyx but need to write papers in ACM and APA
formats. I see that the package texlive-publishers includes APA and ACM
document classes, and I have the package installed, but lyx does not see
those templates.
How can I use lyx to write APA and ACM papers? I also
LyX does have an APA layout, so you should be able to use it. Check to
make sure you do have the APA document class installed and that LaTeX
can see it (run texhash as root) and then reconfigure LyX (Tools
Reconfigure). You can use Tools Tex Info to check what LyX thinks is
there.
I don't see
I installed the texlive-publishers package recently on ubuntu-edgy and after
a ToolsReconfigure, LyX recognized both APA and ACM.
Bob Lounsbury
On 1/29/07, Richard Heck [EMAIL PROTECTED] wrote:
LyX does have an APA layout, so you should be able to use it. Check to
make sure you do have the
Sorry, I lied. I don't have ACM. Just APA.
On 1/29/07, Bob Lounsbury [EMAIL PROTECTED] wrote:
I installed the texlive-publishers package recently on ubuntu-edgy and
after a ToolsReconfigure, LyX recognized both APA and ACM.
Bob Lounsbury
On 1/29/07, Richard Heck [EMAIL PROTECTED] wrote:
Alexandru Mustatea wrote:
This is in reply to Paul A. Rubin's request (sorry for breaking
the thread, email problem). The LaTeX code that produced the good
output is below. I also forgot to mention that I'm using LyX 1.4.3.
Now, the workaround would be to export to LaTeX and then hack the
On 29 Jan, 2007, at 7:23 AM, William Adams wrote:
\documentclass[draft]{memoir}
\documentclass[final]{memoir}
Although the other issues aren't addressed AFAIK in LyX (yet),
they're as easily solved in LaTeX by using the right packages
appropriately.
Well, that is true by
On 28 Jan, 2007, at 6:21 PM, Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored
by
different people (like Samba Unleashed), you probably couldn't do it
as a
single file.
Well, I can tell you from very recent experience that even a relatively
short 250
Hi,
Anyone know how to convert a LyX file with many math equations to a
word file? Do I need to retype all those in-line math characters and
equations? Thank you in advance!!
bests,
yiwei
Hello,
Are there any known issues with math characters and texlive?
Under texlive and LyX 1.4.3 I opened a couple of chapters of my thesis and
some math characters were displayed incorrectly. For instance, rho was
displayed as 'ae' not a squirly 'p'. Because of this I uninstalled texlive
and
Bob Lounsbury wrote:
Hello,
Are there any known issues with math characters and texlive?
Under texlive and LyX 1.4.3 I opened a couple of chapters of my thesis and
some math characters were displayed incorrectly. For instance, rho was
displayed as 'ae' not a squirly 'p'.
I use texlive and
I'm not sure this will help, my son uses Lilypond. While he complains
about some difficulty, the program typesets in latex very easily, so
you may be able to use it to include your notation in Lyx. The only
two other programs he wants cost about $700.00. I installed Lilypond
for him from
On Mon, 2007-01-29 at 12:25 +, José Matos wrote:
On Monday 29 January 2007 7:37:13 am Kenward Vaughan wrote:
On Sun, 2007-01-28 at 20:32 -0600, Les Denham wrote:
On Sunday 28 January 2007 18:55, Kenward Vaughan wrote:
Hello folks,
I have an older LyX file for my classes which
Stefano Franchi wrote:
On 29 Jan, 2007, at 7:23 AM, William Adams wrote:
\documentclass[draft]{memoir}
\documentclass[final]{memoir}
Although the other issues aren't addressed AFAIK in LyX (yet),
they're as easily solved in LaTeX by using the right packages
appropriately.
Well, that is
Uwe Stöhr wrote:
Rainer M Krug schrieb:
These URLs are entered via the URL command in the menue. As I don't
like the borders around the URLs, I used the package hyperref, and the
problems start: the URLs are now nicely formated in blue, but they
don't break at the end of a line, even if I
Bruce Pourciau wrote:
> \begin{enumerate}[resume]
Currently, this is not yet possible without such changes as Richard describes.
LyX 1.5 will have the ability to insert optional arguments (a.k.a. "Short
Title") to environments, as you can do now for commands (like section).
Jürgen
Jamie Faunt wrote:
For rhythmic and also standard notation however, I do
> have occasional needs. I would really prefer to use typography rather
> than bitmaps. So I was wondering if you or any other reader on this
> list knew of any music notation packages that use or export to LaTeX
> so that
Steve Litt wrote:
Of course, if it were 1200 pages and different chapters were authored by
different people (like Samba Unleashed), you probably couldn't do it as a
single file.
FYI, with latest 1.5, I can open a 1200 pages document (the UserGuide
copied 12 times) and type in it without any
Rainer M Krug schrieb:
Thanks - but if I create a pdf with pdflatex, then the second URL has no
linebreaks. Is there something wrong with my setup?
You use other page margins, so you have to readjust the hyphenation points.
regards Uwe
Rainer M Krug schrieb:
You use other page margins, so you have to readjust the hyphenation
points.
I must checked in the document properties - the page margins are set to
default.
On my system the default is A4, on yours probably letter. Just set hyphenation points at the regions
where
Russell Davie schrieb:
I find each time I put an image and generate a pdf, a blank page is the first
page, and the image is on the second.
This depends on the settings you use. I assume that you have a special titlepage setting or use a
special document class. Send a small LyX example file
On Mon, 29 Jan 2007, Tobias Krause wrote:
is there a way to search for a referenced bibtex source? Or do I have to
search for in the .lyx file with a text editor, go back to LyX and
search for the surrounding text?
I'm guessing the latter so I can't help you. However, I think you should
On Monday 29 January 2007 7:37:13 am Kenward Vaughan wrote:
> On Sun, 2007-01-28 at 20:32 -0600, Les Denham wrote:
> > On Sunday 28 January 2007 18:55, Kenward Vaughan wrote:
> > > Hello folks,
> > >
> > > I have an older LyX file for my classes which I opened for the
> > > semester, and cannot
On Mon, 29 Jan 2007 12:35:02 +0100
Uwe Stöhr <[EMAIL PROTECTED]> wrote:
> Russell Davie schrieb:
>
> > I find each time I put an image and generate a pdf, a blank page is the
> > first page, and the image is on the second.
>
> This depends on the settings you use. I assume that you have a
On Jan 28, 2007, at 10:44 AM, Stefano Franchi wrote:
> 1. Framemaker has the concept of a "book": a multifile work to
> which you can add chapters (and indexes, etc). Once you have a book
> set up, you can find and replace across chapters, change the
> formatting across the whole book, etc.
Les Denham wrote:
> Are you familiar with Lilypond (http://lilypond.org)? It produces
> beautiful
> results, and can be integrated with LaTeX. So putting it together with
> Lyx should be practical, though I haven't tried it.
I'd recommend that, too. The upcoming LyX 1.4.4 will check for
1 - 100 of 132 matches
Mail list logo