Very Interesting Birt!
For the NEC PC-8300 the LCD cable is different?
My Wish is to make somehow an Adapter, so the old PC-8201 LCD Modules
could be connected to NEC PC-8300.
As i understand, only the connector is different and PC-8300 LCD
utilize 2 newer SMD ICs instead of "Thru Hole" ICs in
No, I think it was my fault. I missed out the “ [m100dvi]” you listed at the
start of the FF.CFG file on your email Josh.
I’m currently making a couple of blank images now to hold saved data & basic
program. Thanks again for your help!
Sent from my iPhone
On 8 May 2023, at 15:53, Josh Malone
I suspect the issue may be cskew=1 which is missing from my CFG. Grimakis
is also using interface=shugart (vs. mine using 'ibmpc') so that will
require the different drive number jumpering (effectively swapping 1 and 0
-- LFILES 0 might have worked)
Yeah, everyone should use Grimakis's files and
Success
I copied the CFG files from Grimakis GitHub and they worked!! I’ll now puzzle
back and see what I had missed in my original CFG files, but for now I’m really
delighted to have it working. Thanks guys for all the help!!
Sent from my iPhone
On 8 May 2023, at 15:37, Gary Wilkinson
I checked my CFG files and they match and I made sure to keep the file name the
same on the img file you provided, but I’m still getting an error.
When I just have the Gotek drive installed I get the error “In Drive0 is NOT a
SYSTEM DISKETTE”
If I configure the Gotek as drive 1 and boot from
On Mon, May 8, 2023 at 7:42 AM Gary Wilkinson
wrote:
> Hi Josh! It was your YouTube video that inspired me to try this! I asked a
> question in the comments, but I think you use a streaming service and so
> must have missed it. I’ve been updating my comments as I go along so others
> have an
Hi Josh! It was your YouTube video that inspired me to try this! I asked a
question in the comments, but I think you use a streaming service and so must
have missed it. I’ve been updating my comments as I go along so others have an
idea how to set this up. Thanks for the initial inspiration
You beat me to it!
I was just setting up a git repo of the files I used and got working.
https://github.com/Grimakis/Tandy-DVI-Gotek/tree/main
One thing I will note, without adding a cskew=1 in my IMG file, I did not
get it to work.
On Mon, May 8, 2023 at 7:09 AM Josh Malone wrote:
> I
I recently converted a DVI for Tandy collector. There was a fellow on this
list (I think) who had compatible images but in the end, the collector I
was doing the conversion for supplied working images on a drive. I've
posted it here: