With only .5mm of tolerance, be sure to account for any double-sided tape you
use.
Scott M.
From: Jeffrey Birt
Sent: Saturday, December 19, 2020 9:46 PM
To: m...@bitchin100.com
Subject: Re: [M100] SuperROM
Got it working! When I went to try and desolder the EPROM the first pin I tried
I found
Of Brian K. White
Sent: Saturday, December 19, 2020 8:14 PM
To: m...@bitchin100.com
Subject: Re: [M100] SuperROM
SR is available, but it's still always possible there were revisions over time.
The datasheet for the socket doesn't show the shape or dimensions of the
contacts:
https
19, 2020, at 8:24 PM, Jeffrey Birt
wrote:
I’ll try the pic again as it seems the first one was too large.
Jeff Birt
*From:* M100 *On Behalf Of
*Steve Baker
*Sent:* Saturday, December 19, 2020 7:07 PM
*To:* m...@bitchin100.com
*Subject:* Re: [M100] SuperROM
An
n dumped? I may go ahead and pull it off the PCB to try
and dump it to at least confirm the EEPROM itself it good.
Thanks for your help.
Jeff Birt
*From:* M100 *On Behalf Of *Greg Swallow
*Sent:* Saturday, December 19, 2020 6:56 PM
*To:* Jeffrey Birt
*Subject:* Re: [M100] SuperROM
Jeff,
The S
rote:
>>>
>>
>> I’ll try the pic again as it seems the first one was too large.
>>
>> Jeff Birt
>>
>> From: M100 On Behalf Of Steve Baker
>> Sent: Saturday, December 19, 2020 7:07 PM
>> To: m...@bitchin100.com
>> Subject: Re: [M100
at 8:24 PM, Jeffrey Birt wrote:
>>
>>
>>
>> I’ll try the pic again as it seems the first one was too large.
>>
>>
>>
>> Jeff Birt
>>
>>
>>
>> From: M100 On Behalf Of Steve Baker
>> Sent: Saturday, December
07 PM
> To: m...@bitchin100.com
> Subject: Re: [M100] SuperROM
>
> Another pic, not sure it was attached correctly...
>
> --
> Greetings from Steve Baker
> “Gravity brings me down...”
>
>
>
>
> On Dec 19, 2020, at 8:00 PM, Greg Swallow wrote:
>
this ROM been dumped? I may go ahead and pull it off the PCB to try and
dump it to at least confirm the EEPROM itself it good.
Thanks for your help.
Jeff Birt
From: M100 On Behalf Of Greg Swallow
Sent: Saturday, December 19, 2020 6:56 PM
To: Jeffrey Birt
Subject: Re: [M100] SuperROM
[cid:eu.faircode.email.473]
Dec 19, 2020 5:47:48 PM Jeffrey Birt :
> SuperROM –
>
>
>
> Working on an M100 now that came with a SuperROM that had stuck in the socket
> and the socket managed getting it out. Socket replaced, but I am confused as
> to how the SuperROM (SR) was ever intended
Here's another from different angle:
[cid:eu.faircode.email.470]
Dec 19, 2020 5:47:48 PM Jeffrey Birt :
> SuperROM –
>
>
>
> Working on an M100 now that came with a SuperROM that had stuck in the socket
> and the socket managed getting it out. Socket replaced, but I am confused as
> to h
No edge for me to grab and my eyes are not good enough to line it up. Maybe the
attached photos can help.
[cid:eu.faircode.email.467]
Dec 19, 2020 5:47:48 PM Jeffrey Birt :
> SuperROM –
>
>
>
> Working on an M100 now that came with a SuperROM that had stuck in the socket
> and the socket
Jeff,
The SR should've had a shim/cardboard attached to it's underside. I'll try and
micrometer one and give you a thickness.
GregS <><
Dec 19, 2020 5:47:48 PM Jeffrey Birt :
> SuperROM –
>
>
>
> Working on an M100 now that came with a SuperROM that had stuck in the socket
> and the socke
SuperROM -
Working on an M100 now that came with a SuperROM that had stuck in the
socket and the socket managed getting it out. Socket replaced, but I am
confused as to how the SuperROM (SR) was ever intended to fit properly.
The SR gets stuck as while the Pin1/28 side is held up from the
13 matches
Mail list logo