Charles are you there ? you did not give an answer for last questions.Will
you help me about that ?
26 Şubat 2019 Salı 18:04:59 UTC+3 tarihinde Charles Steinkuehler yazdı:
>
> On 2/26/2019 7:41 AM, Ömür Ceran wrote:
> > I will try temperature sensor to understand the problem. T
I just want to make a 3d printer with BBB,for now ı can make it conventional
way. However ı mentioned previous mails,when ı delete velocity extrusion enable
code, machinekit gave error. Can you explain it why? Is it about Ngcwriter? Or
which program should ı use?
--
website: http://www.machine
I will try temperature sensor to understand the problem. Thank you for that.
But ı dont understand 'conventional' means, are you trying to say that problem
is about Ngcwriter program output or cura? İf so, do you have any suggestion
about conversion(gcode to mcode)?
Ömür ceran
-
Actually ı am using cura with Ngcwriter extension.I sliced a stl file and save
it as a .ngc and upload in machinekit program.Machinekit shows the file which ı
uploaded but when ı run the program, it does not work. I should say that, ı did
not connect any sensor or motor yet. Can it be about temp
to charles
stein corexy. Can you help me about that? How can ı configure it for corexy and
solve spindle to extruder?
https://github.com/cdsteinkuehler/machine-configs/tree/master/configs/CoreXZ
Thank you
Ömür Ceran
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github
Thank you for you answer charles,but ı am new at linux,so can you explain
specifically how can ı add subroutines?
21 Ocak 2019 Pazartesi 21:18:36 UTC+3 tarihinde Charles Steinkuehler yazdı:
>
> On 1/21/2019 1:29 AM, Ömür Ceran wrote:
> > Hello,
> > I was trying to make a 3d
: Changing the Y and Z axis pins physically on the BBB.
Option 2 : Changing the Y and Z axis on the code which is in the .hal file
if it is necessary.
Option 3 : If you have a CoreXY configuration, can you send me it with
installing explanation?
Thank you
Ömür Ceran
--
website: http