Re: [Machinekit] Bamboo cnc/limit switch errors

;> >>>> -- >>> website: http://www.machinekit.io blog: http://blog.machinekit.io >>> github: https://github.com/machinekit >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Machinekit" group. &

Re: [Machinekit] Sending gcode to Machinekit from remote source

iving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/0a67eaea-755a-4cb1-87c9-d82789169d06o%40googlegroups.com > <https://groups.google.com/d/msgid/machinekit/0a67eaea-7

Re: [Machinekit] Seeed to design and build Machinekit focused Cape for BeagleBone Black/AI

ou are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/

[Machinekit] AC power supply for stepper driver?

or-and-driver.html> -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe fro

Re: [Machinekit] Seeed to design and build Machinekit focused Cape for BeagleBone Black/AI

their ARM Cortex-A was good and we see others doing this too but a big machine tool like a 5-axis mill with tool changer and cooling and saftey interconnects is going to need something bigger than a PRU. FPGAs work well as wold an STM32 tht had on order about 100 pins. -- Chris Albertson Redond

Re: [Machinekit] Re: Seeed to design and build Machinekit focused Cape for BeagleBone Black/AI

oups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/73cb20b7-83ba-4b8f-a629

Re: [Machinekit] Seeed to design and build Machinekit focused Cape for BeagleBone Black/AI

ne on the hardware.Pretty much exactly that way it works if you use a PC and a Mesa FPGA card. -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are s

Re: [Machinekit] Re: PICnc with Machine Kit.

hardware that's out there. > > > > So yes we will see new embedded processors with USB-C. Of course. But > to say that the only design choice is that is ignoring what is already > there. > > > > John > > > > > >> -Original Message

Re: [Machinekit] Machinekit lathe gcode not working as expected

gt; https://groups.google.com/d/msgid/machinekit/30e422e8-c824-4f50-9636-f1a2c6681967%40googlegroups.com > <https://groups.google.com/d/msgid/machinekit/30e422e8-c824-4f50-9636-f1a2c6681967%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google

Re: [Machinekit] PRU PWM reader implementation - asking for feedback/suggestion

Chris Albertson 12:28 PM (0 minutes ago) to Damien In general, the way I'd read a PWM input signal is to measure the length of the high and the length of the low parts independently.Almost all small CPUs now days have external hardware that you can program to measure pulses then in sof

Re: [Machinekit] Rotary CNC + Bamboo + BBB + CRAMPS?

googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://gi

Re: [Machinekit] Rotary CNC + Bamboo + BBB + CRAMPS?

ision hardware for. > http://openpnp.org/ > > Often, the "back-end" performing the motion does use gcode. > > On 2/26/2019 2:01 PM, Chris Albertson wrote: > > I just read the TI's paper on this. They describe the workflow for > using > > the machine learn

Re: [Machinekit] Lathe tailstock axis

; "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout.

Re: [Machinekit] Beagle Bone Black IO Expander Question

ng on a cape for basic IO buffering for the step/dir pins and I > also want to use shift registers for the regular input/output. > I am planning on using a 74hc595 on the board for the 8 outputs and a > 74hc165 for the inputs. > > -- Chris Albertson Redondo Beach, California -- we

Re: [Machinekit] Support for new BeagleBoard.org hardware

quot;Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. &

Re: [Machinekit] GUI Geared towards Embedded Platforms

/optout. > > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this

Re: [Machinekit] Re: Connecting HAL components across multiple CPUs

input. >> > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group

[Machinekit]

and a few micro side drill bits for the through holes. BTW it seems like the guy in the video could have saved a lot of time by using a (fake) ground plane that flooded all the empty space. No need to mill all that copper away. https://youtu.be/xM8sTEw3OLQ?t=5m41s -- Chris Albertson Red

Re: [Machinekit] LinuxCNC and BeagleBone Black - a road well travelled?

e barrier to contributors. Put the docs on a Wiki. -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Mac

Re: [Machinekit] VCarve "gcode sender"

bscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: ht

Re: [Machinekit] mach3 interface board 5 axis

t; Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- Y

[Machinekit] Can MK read g-code from serial port?

same hand controller for both -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group.

Re: [Machinekit] Project suggestion

One more thing: I looked up the atsame54 evaluation board. It was $85 That is about $70 more than other comparable products. Here is what I'm using: http://www.st.com/.../nucleo-f401re.html

Re: [Machinekit] Project suggestion

t; https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this g

Re: [Machinekit] Zynq uSD Image Generation

ent-board-for-makers-and-hobbyists/ > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit"

Re: [Machinekit] Is there any interest in a turnkey solution?

ncluding a cheap ARM based controller with a > basic GUI for the low-end machines and a fully supported fancy GUI 10k+$ > system the high-end machines. > > I'm not sure if this makes, but that's what I'm trying to figure out > now. > > Cheers, > Alex > > C

[Machinekit] real time CNC using Python on Pi3

zero jitter. The method is portable across any ARM A type. DMA seem an obvious solution. I think the idea could be adapted to MK. This appears to be new, code put in git hub 2017 https://github.com/Nikolay-Kha/PyCNC -- Chris Albertson Redondo Beach, California -- website:

[Machinekit] Looking for examples of conversational machine interface

it is the least bad option. Sorry to cross post this. I know some of you will see this twice -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you

Re: [Machinekit] BBB PRU Would 3-phase 3-axis with feedback (18 channel PRU) be possible?

the main controller. If I'm designing today I want to either emulate this or accommodate it. Places the PRU inside the ARM chip forces the centralized design On Wed, Oct 18, 2017 at 10:38 PM, Bas de Bruijn wrote: > > > > On 17 Oct 2017, at 23:57, Chris Albertson > wr

Re: [Machinekit] BBB PRU Would 3-phase 3-axis with feedback (18 channel PRU) be possible?

To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson

Re: [Machinekit] intergrate computed torque control (PD controller)

e it in future with another robot but for now, i > still want to try control arm robot by linuxcnc > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message becaus

Re: [Machinekit] intergrate computed torque control (PD controller)

r...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https

Re: [Machinekit] Steprate Question

machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email t

Re: [Machinekit] Re: Cheapest way to get +/-10V signal from x86 computer with encoder input

because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For

Re: [Machinekit] Re: Getting started with Servoes

ar 15, 2017 at 10:17 AM, Claudio Lorini wrote: > ...well, if you're willing to do some electronic DIY, there are some > interesting servo dc driver projects around: > > http://www.uhu-servo.de/ > https://sites.google.com/site/marcosinatti/elettronica/downloads (sorry, in > Ita

[Machinekit] Getting started with Servoes

stepper. This has the advantage that it turns it into something I've used before -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscr

Re: [Machinekit] How to figure out specs of a surplus servo motor?

terminals at 90 degree intervals around the motor case. Two of these, 180 degrees apart as connected. Why would there be four? Thanks, Chris On Mon, Mar 6, 2017 at 3:02 AM, Charles Steinkuehler < char...@steinkuehler.net> wrote: > On 3/5/2017 8:22 PM, Chris Albertson wrote: > &

[Machinekit] How to figure out specs of a surplus servo motor?

nd torques? How to figure those out? -- Chris Albertson Redondo Beach, California -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit&qu

Re: [Machinekit] Machinekit image server is unresponsive

cribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- Chris Albertson Redondo Beach, California --