[Machinekit] Re: Zynq uSD Image Generation

Charles; I have the linux sd card for the snickerdoodle. Can that image be used to recompile machinekit? or do we have to start from scratch? thanks Doc On Thursday, December 21, 2017 at 6:45:37 PM UTC-7, Charles Steinkuehler wrote: > > Anyone got a recipe or scripts for generating a working Zy

[Machinekit] Re: Zynq uSD Image Generation

Charles; I also have a snickerdoodle black that I had planned to use with machinekit for CNC control. I would be interested in helping by beta testing etc. let me know. thanks Bill On Thursday, December 21, 2017 at 6:45:37 PM UTC-7, Charles Steinkuehler wrote: > > Anyone got a recipe or script

[Machinekit] Re: Zynq uSD Image Generation

Hi Doc, I also have a Snickerdoodle, and am working on getting Machinekit running on it. It still has a long ways to go before it is functional, but I am making progress. I wrote up some instructions for how I built my rootfs, and posted them in a gist

[Machinekit] Re: Zynq uSD Image Generation

Hi Charles; I recently purchased one of these boards with the dual arm processor hoping to use it for cnc control using machineKit. https://www.crowdsupply.com/krtkl/snickerdoodle from the specs any thoughts on if it will work. Also linux has been ported to the chip already. It might work for th

Re: [Machinekit] Re: Zynq uSD Image Generation

Thanks! All the links are very helpful. I'm quite familiar with the Altera side of the SoC+FPGA stuff since I work with that at my day job, but I'm not nearly as familiar with the Zynq. On 1/7/2018 12:21 AM, automata wrote: > Hi Charles, > > I managed to get machinekit running on the Zed board

[Machinekit] Re: Zynq uSD Image Generation

Hi Charles, I managed to get machinekit running on the Zed board and Zturn board. I used instructions on this site to get petalinux kernel loaded. https://medium.com/developments-and-implementations-on-zynq-7000-ap/install-ubuntu-16-04-lts-on-zynq-zc702-using-petalinux-2016-4-e1da902eaff7 I used