Hi Doc, I also have a Snickerdoodle, and am working on getting Machinekit running on it. It still has a long ways to go before it is functional, but I am making progress. I wrote up some instructions for how I built my rootfs, and posted them in a gist <https://gist.github.com/cmcquinn/d63e6bc3a6e5b057fda2f06894226508>. Hopefully my procedure is clear enough for you to follow.
Sometime in the next few days, I hopefully will find time to sit down and write a detailed forum post outline the current state of my efforts to get Machinekit fully up and running on Snickerdoodle, so I can get help from the community to overcome some problems I have run into. Best, Cameron On Friday, February 16, 2018 at 4:43:30 PM UTC-7, Doc Cotton wrote: > > Hi Charles; > I recently purchased one of these boards with the dual arm processor > hoping to use it for cnc control using machineKit. > https://www.crowdsupply.com/krtkl/snickerdoodle > from the specs any thoughts on if it will work. Also linux has been ported > to the chip already. > It might work for the zynq image generation? > thanks > Doc > > > On Thursday, December 21, 2017 at 6:45:37 PM UTC-7, Charles Steinkuehler > wrote: >> >> Anyone got a recipe or scripts for generating a working Zynq uSD image >> that includes Machinekit? I've got a (day-job) project that will be >> targeting a low-end Zynq board with HDMI in, and I'm thinking of using >> the Arty board: >> >> >> http://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/ >> >> >> ...which has Arduino headers, meaning it would be pretty trivial to >> add some stepper driver to make a pan/tilt platform along with the >> video in. >> >> -- >> Charles Steinkuehler >> cha...@steinkuehler.net >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.