Thanks Mark.
Is there a way to have the bounce notification and info be sent to a
different email address (like me instead of the list owner)? It would be
too technical to have them sent to the owner.
On Fri, Jan 4, 2019 at 11:59 AM Mark Sapiro wrote:
> On 1/4/19 9:55 AM, Ricardo Kleem
Hi,
Where should I look at for trying to figure out why particular members are
being dropped off? I have members receiving the excessive bounce messages
but I'm not finding much in the mail log relative to excessive bounces for
the email address (I'm probably not looking for the correct bounce
Hello,
I'm using mailman 2.x with postfix with much trouble. Recently I started
seeing a lot of errors like this:
delivery to xxx failed with code 452: 4.5.3 Error: too many recipients
I do have both mailman and postfix configured for max recipients of 10, so
I don't understand why there would
Hi,
I've started noticing bounces to yahoo and hotmail users with this
rejection message:
Unfortunately, messages from (xxx) on behalf of (yahoo.com.br) could not
be delivered due to domain owner policy restrictions. (in reply to end of
DATA command))
In researching this problem I found this
Hi,
I have some lists that have message delivery bounces returned and I can’t quite
understand what’s going on.
I’m using Postfix on the mailman server. In sending messages to either gmail or
yahoo recipients, it seems to only work when the receiving end relays from a
certain server, but
I have a list with around 50k users and I wanted to move from one server to
another.
Does copying the the specific list's directory (e.g. under
/var/lib/mailman/lists) from one server to another work?
Or, alternatively, does config_list output sufficient information of all
the settings and
I wanted to give it a try. I understand it requires multiple packages to
get it working, and wondering if there's already anywhere I can point to to
install via apt-get.
thanks
Ricardo
--
Mailman-Users mailing list Mailman-Users@python.org
On Wed, Jan 15, 2014 at 2:40 AM, Mailman Admin
mailman-ad...@uni-konstanz.de wrote:
Hello Ricardo Kleemann
Am 2014-01-15 06:32, schrieb Ricardo Kleemann:
On Tue, Jan 14, 2014 at 8:42 PM, Mark Sapiro m...@msapiro.net wrote:
On 01/14/2014 04:28 PM, Ricardo Kleemann wrote:
1) What file
Hi,
The link normally at the footer of list messages, for example:
Unsubscribe:
https://mail.python.org/mailman/options/mailman-users/ricardo%40americasnet.com
Will send out a confirmation email and also takes the user to a
user-specific version of the options page.
I'm trying to find, with no
Ok, thanks.
On Sat, Jan 18, 2014 at 1:49 PM, Mark Sapiro m...@msapiro.net wrote:
Ricardo Kleemann wrote:
I'm trying to find, with no success, where the template for that output
page is. It seems this might be a hardcoded output that uses the
mailman.po
text strings, but cannot have
Hi guys,
I have a couple of questions:
1) What file would I modify to customize the text for the subscription
results? I'm looking to customize the text in another language (pt_BR) but
I can't find the text file. I do see the subscribe.html template and it
makes a mention to MM-Results
2) Is it
Thanks Mark.
On Tue, Jan 14, 2014 at 8:42 PM, Mark Sapiro m...@msapiro.net wrote:
On 01/14/2014 04:28 PM, Ricardo Kleemann wrote:
1) What file would I modify to customize the text for the subscription
results? I'm looking to customize the text in another language (pt_BR)
but
I can't
Hi,
If I want to setup a custom page that has a field for subscribing to a
list, how should I format the call to the cgi-bin/subscribe script in order
to process the request?
What should the post variables be?
thanks
Ricardo
--
Mailman-Users
Hi,
I'm trying to figure out what is happening that my lists are having
significant numbers of users unsubscribed automatically, even though I
turned off bounce processing.
It seems that the members being removed indeed have a number of bounces,
but if I turned off bounce processing how could
Hi,
I have a large list (50,000) which processes a large number of bounces and
also supposedly disables subscriptions after excessive bounces.
However, even after seeing a subscription disabled message, if I check
the member list, the address is still in there.
Doesn't subscriptin disabled
is there a way to configure via withlist instead of the web admin?
On Sat, Dec 14, 2013 at 11:59 AM, Mark Sapiro m...@msapiro.net wrote:
On 12/14/2013 11:11 AM, Ricardo Kleemann wrote:
For example, I'll see this message:
List: xyz
Member: email hidden
Action
Hi,
I have a list and I set the option to disable bounce processing, the list
admin wants to take care of bounces and removals on his own.
However he's still getting addresses removed from the list automatically
by mailman.
Is there something else I need to set to make sure mailman doesn't do
Hi,
I have a number of lists running and they worked fine with the subject prefix
for each list.
Suddenly all the distributed messages are no longer showing the subject prefix
and I don't understand what could be causing this.
I'm not sure how to debug it, I don't see any evident errors and
[EMAIL PROTECTED]
To: Ricardo Kleemann [EMAIL PROTECTED]
Cc: mailman-users mailman-users@python.org
Sent: Friday, November 28, 2008 10:35 AM
Subject: Re: [Mailman-Users] when does logs/post get updated?
Ricardo Kleemann wrote:
I have some more data on this...
I enabled the debug in SMTPDirect.py
Hi,
I'm having some problems with my lists recently. I see in my mail log
that mailman post has been called. However, when I look in the
logs/post file, it's been almost 24 hours since anything has been
written there.
I'm running mailman on Ubuntu Hardy, and another weird thing is that
whenever
Hello Mark,
Thanks for your reply.
I'm running mailman on Ubuntu Hardy, and another weird thing is that
whenever I stop mailman, it always leaves at least one process hanging
around. I have to forcefully kill it. After I stop it, I still see:
list 3833 0.0 0.4 83076 7540 ?
:
Ricardo Kleemann wrote:
I'm having some problems with my lists recently. I see in my mail log
that mailman post has been called. However, when I look in the
logs/post file, it's been almost 24 hours since anything has been
written there.
The post log is written by SMTPDirect (under
Hi,
I have a couple of lists with 20,000 members each.
How can I tune mailman to improve delivery performance? I know that some
list managers lump users by domain in order to more efficiently deliver.
What sorts of configuration can I do to help improve performance?
Thanks
Ricardo
Hi,
I'm running mailman 2.1.9 under Ubuntu, and for some reason it seems to somehow
be getting stuck once in a while. Almost every day I have to kick it to get
it going by restarting the process. Although it seems all the qrunner processes
are still there, the qfiles seem stuck and until I
Hi,
One of my lists is the newsletter type, where one person is in charge of doing
subs and unsubs.
For this list in particular I don't really care, at all, about sending this
disabled message to the users.
In the list config, I set bounce_you_are_disabled_warnings to 0 yet I still see
Hi,
I see in my maillog email addresses that are bouncing because they are not
valid, and I see mailman handling the bounce score, but the owner does not
receive the bounce messages.
Is there a way to configure such that the owner does receive these bounces?
Thanks
Ricardo
Thanks.
I have all those settings to Yes, isn't that the way it should be?
The first setting is about bounce messages that failed to be detected... but
what about regular bounces that are properly detected?
Ricardo
Hello,
Go onto the Bounce Processing page on your Administration page.
So there's no easy way to prune a large list of bad addresses... :-(
Mailman attempts to process bounces on its own. Even with that setting
set to yes, you will only ever see the actual bounces when Mailman
cannot detect them.
Unless someone like Mark has a brilliant way of viewing
Hi,
Is it possible for a list to put each recipient's email address on the To
instead of the list address itself?
Similarly, there are some email clients that change the From to say
list-bounces on behalf of sender address, how can I have the list simply
put the sender's address and not have
Hi,
I have a couple of large lists ( 15,000 members) in which a significant
percentage of them have been deactivated. I'm not sure why, I don't think that
all of them are really consistently bouncing.
I wanted to reactivate all of them and let mailman take its course once again
in processing
PROTECTED]
To: Mailman Users mailman-users@python.org
Sent: Friday, June 03, 2005 5:25 AM
Subject: Re: [Mailman-Users] how can moderators automatically subscribe
users?
On 6/2/05 8:39 PM, Mark Sapiro [EMAIL PROTECTED] wrote:
Ricardo Kleemann wrote:
I know that via the web interface
of the required aliases? How can I configure mailman
such that it uses a proper email address rather than providing
[EMAIL PROTECTED] ?
Ricardo
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: Ricardo Kleemann [EMAIL PROTECTED]
Cc: mailman-users@python.org
Sent: Wednesday, June 01
Hi Mark,
One thing that confuses me, is that I sent email to
[EMAIL PROTECTED] but as you see the smtp transaction
used mailman-bounces (so it didn't use the listname, 'ricardo1')
I'm guessing the specific error is the localhost part, not the -bounces
part since virtually all mail from mailman
Thanks again Mark,
You've helped me solve it! :-)
Indeed, it was the localhost in Defaults.py that was causing the problem. I
changed it to 'lists.americasnet.com' and now messages to -owner work...
Ricardo
- Original Message -
From: Mark Sapiro [EMAIL PROTECTED]
To: Ricardo Kleemann
Hi,
I know that via the web interface this is quite easy. However, I have a need
to be able to subscribe users via email commands, without the user being
subscribed getting a confirmation email. In other words, someone asks to be
inserted into the list, and then an email is sent with the
Hi...
I posted this yesterday but I have received no replies... can someone help
me out?
Thanks
Ricardo
Hi,
I'm getting errors in the smtp-failure log when a message is attempted to
be
delivered to the list owner.
This is the error I see:
SMTP session failure: 517, Syntax error.
as my own email,
[EMAIL PROTECTED]
Is there a way I can manually run the mailman program with debug to try and
see what's going on in the smtp session ?
Thanks
Ricardo
- Original Message -
From: Sythos [EMAIL PROTECTED]
To: Ricardo Kleemann [EMAIL PROTECTED]
Cc: mailman-users@python.org
Thanks for the pointers, Mark.
Is it only the one list, or is it all moderated lists?
Well I reconfigured the list so that members are not moderated, just to
test... no difference.
Now I'm actually just simply sending email directly to the -owner address,
and I continue to get this syntax
Awesome, this below is exactly what I was looking for; I'll add that code to
try and get more debug from the smtp transaction.
Thanks
Ricardo
If you look in Mailman/Handlers/SMTPDirect.py within the definition of
bulkdeliver() you'll see
except smtplib.SMTPResponseException, e:
Hi,
I'm getting errors in the smtp-failure log when a message is attempted to be
delivered to the list owner.
This is the error I see:
SMTP session failure: 517, Syntax error. msgid: ...
What exactly is this? How can I determine what the session error was?
This happens every time I send a
Hi,
I sent this message out yesterday, but haven't received any replies... Can
someone help me out with this?
Original Message
Subject: [Mailman-Users] We're sorry, we hit a bug! -- Please Help. From:
ricardo [EMAIL PROTECTED]
Date:
of the modules mentioned in
the traceback.
My set of python RPMs (in a SUSE system) are:
python-mysql-0.9.2-52
python-devel-2.3-49
mod_python-2.7.8-427
python-2.3-49
python-curses-2.3-49
python-tk-2.3-49
What other information can I provide to help?
Ricardo
On 4 Mar 2004, at 19:36, Ricardo
Hi,
Thanks for the update!
I have a question... I currently run mailman as installed
via RPM (under SUSE 9.0). How can I upgrade via the tarball?
I mean the rpm puts files into specific locations (such as
both /usr/lib/mailman and /var/lib/mailman) and I wanted to
make sure that when I upgrade,
without having to
rebuild mailman with the specific gid settings. That is
really nice. I'm hoping I can build mailman-2.1.4 from the
tarball and it will consult those files for gid
configuration?
Ricardo
- Original Message Follows -
On Wed, Dec 31, 2003 at 04:04:37PM -0800, Ricardo
Hi,
Thanks for your suggestion.
You can either change the admin_member_chunksize setting
for the list so it's larger than the total amount of
member on your list (which can't be done through the web
gui, you'd need command line access) or you can check out
the roster, which, oddly
Hi,
How can I view all members in a list rather than only in
chunks for each letter?
Thanks
Ricardo
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
Hi,
I've been getting these messages and I don't understand what
they mean, and how I can resolve whatever the issue is?
It says:
The attached message was received as a bounce, but either
the bounce
format was not recognized, or no member addresses could be
extracted
from it. This mailing list
Hi,
I have a list with over 300 members, and none of their
nodupes flags are set. What is the best/quickest way to
set the nodupes flag for all members?
Thanks
Ricardo
--
Mailman-Users mailing list
[EMAIL PROTECTED]
Hi,
Is there a way for mailman's configure script to detect the
current settings (such as
--with-username, --with-mail-gid and so on)?
Or is there a quick way for me to manually check what they
should be?
I want to be able to upgrade mailman, but I never remember
exactly what those settings
Hi,
Is there any way to configure Mailman such that, for an
announcement-only type list, when a message is sent to the
list, the To: shows the member's address, rather than the
list address?
Some list software allows the ability to hide the list
address itself, so that address is not advertised.
Hi,
I can't seem to find in the Membership Management section of
the web interface, a way to subscribe new members.
Can subscription only be done via a request, and not entered
in by the administrator?
Ricardo
--
Mailman-Users mailing list
Hi,
I guess I don't quite understand what you mean?
- Original Message Follows -
You can use Verp and you can edit the source so that it
doesn't overtly show the list email address. Beyond that,
your best bet is to simply use an ordinary alias with an
MTA that allows
-09-26 at 10:32, Ricardo Kleemann wrote:
Hi,
I guess I don't quite understand what you mean?
- Original Message Follows -
You can use Verp and you can edit the source so that
it doesn't overtly show the list email address.
Beyond that, your best bet is to simply use
Hi,
Sometimes an announcement-only type of list needs also to be
configured such that it restricts subscription, meaning that
only an approved person (e.g. administrator) can actually
add members to the subscription list.
Is that at all possible with MM ?
Is it possible to hold subscription
it the first line of text in your
message is dependent on the email client (MUA) that you
are using.
Ricardo Kleemann wrote:
Thanks for the info.
Being a moderator just means that you can approve posts
that are held for the list. It doesn't mean *your*
posts won't be held
Hi,
Thanks for the info.
- Original Message Follows -
Hello,
Let me add to what Jon Carnes said about this.
1. You are right, just change the moderation bit for the
users who want to post.
Ok, that makes sense... is there a way to programatically
turn off the moderation bit
Hi,
If I wanted to add some css to the mailman web interface,
what would be the best/quickest way?
Or do I have to modify all the html templates and add some
css info to them? Can I instead configure something in one
of the files or maybe the HTMLFormatter ?
Thanks for any help.
Ricardo
Hi,
I configured an announcement-only list according to the
instructions in the FAQ,
http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq03.011.htp
And I setup my email address as moderator for that list.
However, I still get messages rejected, I assume because I
did not clear the mod bit
Thanks for the info.
Being a moderator just means that you can approve posts
that are held for the list. It doesn't mean *your* posts
won't be held.
This is a good feature, especially if you have savvy (but
childish) users. Anyone can forge an email header and say
their mail is from
Hi,
I'm running mailman under apache 1.3
I'd like to be able to restrict access to /admin.cgi and
/listinfo.cgi, because I don't want everyone to see all the
available lists, while still allowing /admin.cgi/listname
and /listinfo.cgi/listname.
I'm not quite sure that is possible, but can anyone
Hi,
If an administrator has multiple lists, is there a web
interface where the many lists can be managed, from a
central location?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman
Hi,
Can mailman be run over nfs, with 2 servers sharing a
mailman installation?
I know there are some issues related to this... for example,
incoming messages really have to be processed by the
individual server, we don't want 2 servers working on the
same message set.
However, for lists, their
Hi,
Is this setting used for determining which outbound smtp
host to contact, or for the mailhost displayed for replies,
or both?
I want to be able to set the smtp host for sending email to
localhost, yet I don't want that setting to be exposed, or
be appended to the list address.
For example,
Hi,
I posted a question earlier today about how to
convert/import existing mailing lists into mailman... and
also about using courier mta... can someone help me out?
I use the courier mta and was wondering if there are
Hi all,
I use the courier mta and was wondering if there are any
existing scripts to adapt to mailman to work with courier?
Can I create new lists off the web interface and have it
automatically work with courier?
Also, how do I port users from other lists into mailman? I
have a number of
Hi,
Does anyone have instructions on how to integrate mailman
with courier mta?
Thanks
Ricardo
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
66 matches
Mail list logo
