[Mailman-Users] Problems with Google Workspace

I run a Mailman installation, 2.1.39 through cPanel. I am having trouble delivering to addresses that are a part of Google Workspace! My mail reports show the mail is accepted, but the users do not get it, and they, or I are seeing no errors. Does Google have mail requirements I am not aware

[Mailman-Users] Problems with mailman installation

Nils writes: > vhost configuration: This is irrelevant at this point, I think. Apache is calling the cgi so you're past that. > Here is the significant part of the fstab file that provides the > necessary directories in the chroot environment: You're missing the bin directory and Python's

[Mailman-Users] Problems with mailman installation

I can't get mailman version (1:2.1.26-1ubuntu0.6) to run on an ubuntu 18.04 installation with apache2 running in chroot. I've done the same thing before, a long time ago and it worked perfectly back then. chroot directory is /home/www (I admit that it's strange to put it there, but the provided

[Mailman-Users] problems sending attachments to lists?

I can send txt files to a list but for some reason when sending doc or docs files the message comes through but there is no  attachment. Any help appreciated. TIA. -- Adam Morris Mobile: 0414 431105 Email, iMessage & FaceTime a...@damorris.com ---

Re: [Mailman-Users] Problems sending to prodigy.net mail server addresses

I sent postmas...@prodigy.net an email, and again, after the first one didn't receive a reply. They finally replied to both messages saying it was a problem on their side (which I think we all knew already. :) They said to send them another note if it happens again. We'll see... Thanks to al

Re: [Mailman-Users] Problems sending to prodigy.net mail server addresses

On 2/11/2019 1:21 PM, Joseph Brennan wrote: The DNS records look perfect to me. If you're going through a time warp to Prodigy maybe the new top-levels like .place don't work yet? You get the error after MAIL FROM because that's the earliest point when a server is allow Prodigy isn't the only o

Re: [Mailman-Users] Problems sending to prodigy.net mail server addresses

On Tue, Feb 5, 2019 at 1:07 AM Richard Johnson wrote: > I run a small mailman server for our historical recreation group. Lately, > I've been seeing messages like: > > : host al-ip4-mx-vip1.prodigy.net[144.160.235.143] said: > 550 5.7.1 Connections not accepted from servers without a valid sen

Re: [Mailman-Users] Problems sending to prodigy.net mail server addresses

On 2/4/19 9:29 PM, Richard Johnson wrote: > > The messages are all sent to the mailing list "cor...@cortha.org". I have > the mailing list setup with "host_name" set as "cortha.org", so that the > address used in the messages will be "cor...@cortha.org" and replies will go > there. The system

Re: [Mailman-Users] Problems sending to prodigy.net mail server addresses

On Mon, 4 Feb 2019 21:29:19 -0800 Richard Johnson wrote: > What seems strange is that MOST of the time messages go through just > fine, but ever now-and-then I'll get this failure notice. Off the top of my head 1) they've a round-robin cluster of MXers in which some are configured differently,

[Mailman-Users] Problems sending to prodigy.net mail server addresses

I run a small mailman server for our historical recreation group. Lately, I've been seeing messages like: : host al-ip4-mx-vip1.prodigy.net[144.160.235.143] said: 550 5.7.1 Connections not accepted from servers without a valid sender domain.alph733 Fix reverse DNS for 149.28.67.38 (in reply

Re: [Mailman-Users] Problems Erasing Subscribe Spam

Oh my, sorry. Got posted a bit late... I've had success in deleting all of the subscription spam, but currently I struggle fighting some bounces from all of these failed addresses. I'll come back to you; meanwhile I'd be glad to get hints :) All the best, Ruediger Am 31.05.2018 um 16:46 sc

Re: [Mailman-Users] Problems Erasing Subscribe Spam

On 05/31/2018 07:46 AM, Rüdiger Wolf wrote: > > It works nicely for a bunch of lists, but I don't get why it doesn't > work with all of them. Looking more closely I found in > /var/lib/mailman/lists/ the pending.pck file the script is > operating on. > > Does someone have an idea why it might not

[Mailman-Users] Problems Erasing Subscribe Spam

We're currently dealing with some Subscribe Spam. Dealing with it, I encountered a problem I need help with: I used Mark's scrip list_pending (https://www.msapiro.net/scripts/list_pending) to find out how many Subscriptions we got and which adresses were used. I iterated over all lists I got

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

Upon further investigation, I found that the prior fix was incomplete. It only fixed the 'letter' links at the top of the Membership List. It didn't fix the links to subsequent chunks at the bottom of the list. Attached is a patch to the 2.1.23 base to fix that. For older versions both this and th

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

Sorry, lines were truncated. This is more accurate. -rw-r--r--. 1 mailman mailman 72139 Sep 28 16:19 /usr/local/mailman/Mailman/admin.py -rw-r--r--. 1 apache mailman 46447 Sep 28 16:20 /usr/local/mailman/Mailman/admin.pyc -rw-r--r--. 1 mailman mailman 71971 Sep 28 14:31 /usr/local/mailman/Mailman

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

ls -l /usr/local/mailman/Mailman/Cgi/admin.py* -rw-r--r--. 1 mailman mailman 72139 Sep 28 16:19 /usr/local/mailman/Mailadmin.py -rw-r--r--. 1 apache mailman 46447 Sep 28 16:20 /usr/local/mailman/Mailadmin.pyc -rw-r--r--. 1 mailman mailman 71971 Sep 28 14:31 /usr/local/mailman/Mailadmin.py.old -rw

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/29/2016 08:04 AM, Christopher Adams wrote: > I cleared browser cache and reloaded. Same problem. Here are answers to > your questions. > > ScriptAlias /mailman/ "/usr/local/mailman/cgi-bin/" > > strings /usr/local/mailman/cgi-bin/admin | grep scripts > /usr/local/mailman/scripts/ > > pref

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

I cleared browser cache and reloaded. Same problem. Here are answers to your questions. ScriptAlias /mailman/ "/usr/local/mailman/cgi-bin/" strings /usr/local/mailman/cgi-bin/admin | grep scripts /usr/local/mailman/scripts/ prefix = '/usr/local/mailman' On Wed, Sep 28, 2016 at 9:57 PM, Mark Sa

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/28/2016 09:34 PM, Christopher Adams wrote: > I did patch the installed instance of Mailman > (/usr/local/mailman/Mailman/Cgi/admin.py). I can see the changes that > it made, but the result is the same when looking at the subscriber list. The patch converts a unicode URL to the character se

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

I did patch the installed instance of Mailman (/usr/local/mailman/Mailman/Cgi/admin.py). I can see the changes that it made, but the result is the same when looking at the subscriber list. On Sep 28, 2016 4:37 PM, "Mark Sapiro" wrote: > On 09/28/2016 04:28 PM, Christopher Adams wrote: > > Thank

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/28/2016 04:58 PM, willi uebelherr wrote: > 2016-09-28 19:12 GMT-04:00 Mark Sapiro : >> ,,, >> You could, but it isn't necessary. > > Dear > > i follow your discussion with Christopher. Your short answer " it > isn't necessary". Can you explain this? He asked if he should apply the patch t

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

2016-09-28 19:12 GMT-04:00 Mark Sapiro : > ,,, > You could, but it isn't necessary. Dear i follow your discussion with Christopher. Your short answer " it isn't necessary". Can you explain this? greetings, willi Asuncion, Paraguay -- Mailman-Us

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/28/2016 04:28 PM, Christopher Adams wrote: > Thank you. I did patch the admin.py file and I can see the changes. > However, if I go to the list subscribers, the link to the next group of > addresses takes me back to the main admin page. > > I did notice that the URL includes < u'http://

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

Thank you. I did patch the admin.py file and I can see the changes. However, if I go to the list subscribers, the link to the next group of addresses takes me back to the main admin page. I did notice that the URL includes < u'http:// > which I thought was the problem that this was supposed

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/28/2016 11:04 AM, Christopher Adams wrote: > > Do I need to patch Mailman and then follow the process as I would for > installing/upgrading Mailman ? You could, but it isn't necessary. > When I patch, should I be in the Mailman build/source directory and not > in the current Mailman dire

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

Thank you for the reply and the attached patch. Do I need to patch Mailman and then follow the process as I would for installing/upgrading Mailman ? When I patch, should I be in the Mailman build/source directory and not in the current Mailman directory ? Would 'patch < admin.patch' work ? Many

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

On 09/27/2016 04:31 PM, Christopher Adams wrote: > > So, the first chunk is '0' and then the link goes to chunk '1', but it > links back to the top-level admin page. ... > Is this a Feature or a Bug ? It is this bug which was fixed by the attache

[Mailman-Users] problems linking to successive chunks of addresses in admin user search

Hello, I have a list with nearly 45,000 subscribers. When a list owner searches for a subscriber through the admin interface, she gets a list of addresses, then a link to follow to get the next 'chunk'. The link leads to something like the following if I were searching for 'stephanie'. http://m

Re: [Mailman-Users] Problems with mail delivery, configure Mailman with Postfix

On 08/22/2016 05:33 AM, Gines Granados Bayona wrote: > Hi Mark, thank you very much, I corrected the data you've given me but It > do not send emails to the list of groups, it remains in pending shipment > mistake. What does "it remains in pending shipment mistake?" mean. I understand you probabl

[Mailman-Users] Problems with mail delivery, configure Mailman with Postfix

Hi Mark, thank you very much, I corrected the data you've given me but It do not send emails to the list of groups, it remains in pending shipment mistake. [root@lab]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/mailman/aliases command_directory = /usr/sbin config_dir

Re: [Mailman-Users] Problems with mail delivery, configure Mailman with Postfix

On 08/19/2016 04:15 AM, Gines Granados Bayona wrote: > > I have made the settings you provided me Mark Sapiro, but still does not > work, and even though I check can not find the error. And what exactly is the problem? Please describe exactly what you do, what result you expect and what actual r

Re: [Mailman-Users] Problems with mail delivery, configure Mailman with Postfix

> > Hi all, greetings Mark Sapiro. > > I have made the settings you provided me Mark Sapiro, but still does not > work, and even though I check can not find the error. > > > > Run the command you indicated me, Mark Sapiro > > > > [root@lab log]# postconf -n > > alias_database = hash:/etc/aliases >

Re: [Mailman-Users] Problems with Membership List and Extraneous Characters in URL

Subject: Re: [Mailman-Users] Problems with Membership List and Extraneous Characters in URL On 07/18/2016 09:59 AM, Mark Graves wrote: > > and here's the source from the link on the page: > > href="u'https://listserv.acog.org/mailman/admin/coding/members?letter= > b&

Re: [Mailman-Users] Problems with Membership List and Extraneous Characters in URL

On 07/18/2016 09:59 AM, Mark Graves wrote: > > and here's the source from the link on the page: > > href="u'https://listserv.acog.org/mailman/admin/coding/members?letter=b&findmember=acog.org'">B   > > Is this a bug? I found someone else complaining about this in 2003, but > nothing since.

[Mailman-Users] Problems with Membership List and Extraneous Characters in URL

I'm running Mailman version 2.1.21. On the web interface Membership Management/Membership List, if I use the Find member and get too many results to show on one screen, the lettered links at the top do not work correctly. The problem is an extraneous U. Here's an example: https://listserv.ac

Re: [Mailman-Users] Problems with Mail Delivery

On 07/14/2016 04:49 AM, Gines Granados Bayona wrote: > I have two users , one local and one external > The two are different in multiple subdomain, one of them a local subdomain > example. > rancid.email.company.com email.company.com > > > > In local in this case would be rancid.email.company.c

[Mailman-Users] Problems with Mail Delivery

Hello, good to everyone, I sent the requested information and thanks very much m...@msapiro.net. I have two users , one local and one external The two are different in multiple subdomain, one of them a local subdomain example. rancid. email.company.com email.company.com In local in this case w

Re: [Mailman-Users] Problems with Mail Delivery - was: Mailman-Users Digest, Vol 149, Issue 16

On 07/13/2016 04:00 AM, Gines Granados Bayona wrote: Please do not 'reply' to digests or if replying to a digest, provide a meaningful Subject:. > Hello, well to everybody, thank you very much Mark Sapiro m...@msapiro.net, > i do the steps and it has worked effectively, but It weirdest other e

Re: [Mailman-Users] problems unsubscribing from lists using email address?

On 06/14/2016 07:59 AM, Adam McGreggor wrote: > > I'm guessing this isn't as simple as the link not being > "mailto:foo-unsubscribe…"; (but wouldn't rule that out). You can't put mailto: links or other HTML in a list's msg_footer and have them rendered as HTML because the msg_footer is always in

Re: [Mailman-Users] problems unsubscribing from lists using email address?

On 06/14/2016 03:45 AM, Adam Morris wrote: > > in the footer of messages for lists I run I put a link for people to > unsubscribe. > > the link is > > listname dash unsubscribe@domain. If the user actually sends mail to 'listname-unsubscribe@domain' and receives no response at all, something i

Re: [Mailman-Users] problems unsubscribing from lists using email address?

On Tue, Jun 14, 2016 at 08:45:11PM +1000, Adam Morris wrote: > in the footer of messages for lists I run I put a link for people to > unsubscribe. > > the link is > > listname dash unsubscribe@domain. > > If someone clicks on this link and sends a message there is no confirmation > and they stay

[Mailman-Users] problems unsubscribing from lists using email address?

Hi all, in the footer of messages for lists I run I put a link for people to unsubscribe. the link is listname dash unsubscribe@domain. If someone clicks on this link and sends a message there is no confirmation and they stay subscribed. If i go to the members interface and untick the bo

Re: [Mailman-Users] Problems using Postfix with Mailman

Christopher Adams writes: > Yes, you are so right. I did have an entry for 127.0.0.1 localhost in > /etc/hosts, but also the entry for IPV6, which I didn't need and it > apparently took preference. This is a general property of IPv6: where available it takes precedence. Unfortunately, the de

Re: [Mailman-Users] Problems using Postfix with Mailman

Yes, you are so right. I did have an entry for 127.0.0.1 localhost in /etc/hosts, but also the entry for IPV6, which I didn't need and it apparently took preference. So, this did help and I thank you. Additionally, there was some configuration in the Postfix main.cf that needed updating due to a

Re: [Mailman-Users] Problems using Postfix with Mailman

On 05/03/2016 04:50 PM, Christopher Adams wrote: > In the maillog file, I get NOQUEUE: reject RCPT from localhost [::1] 454 > 4.71 : Relay access denied; from=< > mylist-boun...@mymailmanserver.com> > > In the Mailman smtp-failure log file, I get: "Relay access denied" > >>From all that I have r

[Mailman-Users] Problems using Postfix with Mailman

Hello all, I previously posted a message about a server "migration" of Mailman to a new CentOS 7 server. It actually is a rebuild and I will be trying to restore list info from backup. Anyway, I have Mailman installed and can access web pages and create lists. I am using Postfix as the MTA and I

Re: [Mailman-Users] Problems with getting httpd to play well with new Mailman install

Yes, it is Apache 2.4 and I had already taken those measures. I don't know what was fouled up, but I rebooted the server and can now get to the web pages and create lists. However, I am still having problems, but will post that as s different issue. Thanks. On Mon, May 2, 2016 at 8:49 PM, Mark Sa

Re: [Mailman-Users] Problems with getting httpd to play well with new Mailman install

On 05/02/2016 02:51 PM, Christopher Adams wrote: > > Looking in the httpd error log, I find this: "client denied by server > configuration: /usr/local/mailman/cgi-bin/listinfo". > > I added a block in the httpd.conf file to allow access to the cgi-bin > directory and restarted httpd. Still, I am

[Mailman-Users] Problems with getting httpd to play well with new Mailman install

Hello all, I recently had a server fail and I am rebuilding a new server (CentOS 7 ) for Mailman. I have the server and OS working and Mailman installed. I have installed Mailman a number of times, so kind of know the routine. I have Apache running and verified that it is by browsing to the root

Re: [Mailman-Users] Problems on mailman3 installation via mailman-bundler

On 10/01/2015 10:22 PM, Mark Sapiro wrote: The email address of the sender of the post doesn't pass the test in mailman/email/validate.py. This means it contains a space or begins with a '-' or contains or a non-printable ascii character or an ascii printable character in the set ][()<>|;^, It

Re: [Mailman-Users] Problems on mailman3 installation via mailman-bundler

On 10/01/2015 11:39 AM, Take wrote: > On 09/29/2015 08:28 PM, Mark Sapiro wrote: >> No. The address which is the problem is the sender address of the post >> that is being held. Mailman is attempting to notify the poster that her >> post is being held for moderation and the poster's address appears

Re: [Mailman-Users] Problems on mailman3 installation via mailman-bundler

On 09/29/2015 08:28 PM, Mark Sapiro wrote: No. The address which is the problem is the sender address of the post that is being held. Mailman is attempting to notify the poster that her post is being held for moderation and the poster's address appears to be invalid. This is normally the address

Re: [Mailman-Users] Problems on mailman3 installation via mailman-bundler

On 09/28/2015 03:31 PM, Take wrote: > I've been struggling for couple of days to get mailman3 up and running > on my Debian Jessie -host. So far I'm in the situation that everything > should (more or less) work, I can create lists and receive confirmation > emails etc. > > However, every post I se

[Mailman-Users] Problems on mailman3 installation via mailman-bundler

I've been struggling for couple of days to get mailman3 up and running on my Debian Jessie -host. So far I'm in the situation that everything should (more or less) work, I can create lists and receive confirmation emails etc. However, every post I send to the testing-list I created end up in

Re: [Mailman-Users] Problems sending email

On 12/07/2014 06:27 AM, Bob Hacker wrote: > I have a problem with one person on my members sending emails to our members > list. The email goes out but no one receives it. If she sends the email to > me, I can forward it to the members list and everyone gets it. Is this member the only one post

Re: [Mailman-Users] Problems sending email

On 12/7/14, 9:27 AM, Bob Hacker wrote: I have a problem with one person on my members sending emails to our members list. The email goes out but no one receives it. If she sends the email to me, I can forward it to the members list and everyone gets it. Please help, Bob Depending on the lis

[Mailman-Users] Problems sending email

I have a problem with one person on my members sending emails to our members list. The email goes out but no one receives it. If she sends the email to me, I can forward it to the members list and everyone gets it. Please help, Bob -- M

[Mailman-Users] Problems making list anonymous

Never mind. This was my mistake. Those headers are added by my webhost when it receives the email from the list. Yes, I feel a little silly for so completely misunderstanding what was going on... :) -- Mailman-Users mailing list Mailman-Users@p

[Mailman-Users] Problems making list anonymous

Hi All, I'd like to insure that sender's email addresses don't appear in any headers. I've set both anonymous_list and first_strip_reply_to to true. Despite this, I'm seeing the following when I view headers: X-Original-To: myaddr...@mydomain.com Received: from zapata.dreamhost.com (zapata.dre

Re: [Mailman-Users] Problems with multi-machine slicing

I'm honestly not sure about that. Other than the slicing, mailman is pretty much set up with defaults. The only changes I make on the lists is setting them so that replies only come back to the admin, not to the entire list (they are mostly used to send notices to cell phones as text messages

Re: [Mailman-Users] Problems with multi-machine slicing

There is some load-balancing on the incoming side that splits messages between servers, but nothing on the outgoing side. Mailman is run directly on each of the SMTP servers. I started doing the slicing awhile back when I was having trouble with mailman crashing occasionally, and wanted to ad

Re: [Mailman-Users] Problems with multi-machine slicing

On 05/25/2014 11:07 AM, Richard Damon wrote: > Could your earlier tests have been done with verp or personalization > enabled? That might have made the slicing work per recipient as the > messages were broken up before sending. That wouldn't do it. The VERPing or personalization is done in the O

Re: [Mailman-Users] Problems with multi-machine slicing

On 5/24/14, 9:53 PM, Jeff Taylor wrote: > Its odd, I could have sworn the slicing used to be done per recipient, > not per message. I've had to check logs for a client to confirm her > messages went out, and generally had check all three machines to > verify every user received the message. > > Th

Re: [Mailman-Users] Problems with multi-machine slicing

On 05/24/2014 06:53 PM, Jeff Taylor wrote: > Its odd, I could have sworn the slicing used to be done per recipient, > not per message. I've had to check logs for a client to confirm her > messages went out, and generally had check all three machines to verify > every user received the message. M

Re: [Mailman-Users] Problems with multi-machine slicing

Its odd, I could have sworn the slicing used to be done per recipient, not per message. I've had to check logs for a client to confirm her messages went out, and generally had check all three machines to verify every user received the message. The rest of the process works as I expected it to

Re: [Mailman-Users] Problems with multi-machine slicing

On 05/24/2014 03:05 PM, Jeff Taylor wrote: > After stopping mailman, machine #1 shows: > May 24 15:23:34 2014 (11512) Master qrunner detected subprocess exit > (pid: 11516, sig: None, sts: 15, class: IncomingRunner, slice: 1/3) > > Machine #2: > May 24 15:21:56 2014 (12767) Master qrunner detected

Re: [Mailman-Users] Problems with multi-machine slicing

After stopping mailman, machine #1 shows: May 24 15:23:34 2014 (11512) Master qrunner detected subprocess exit (pid: 11516, sig: None, sts: 15, class: IncomingRunner, slice: 1/3) Machine #2: May 24 15:21:56 2014 (12767) Master qrunner detected subprocess exit (pid: 12769, sig: None, sts: 15, clas

Re: [Mailman-Users] Problems with multi-machine slicing

On 05/24/2014 12:14 PM, Jeff Taylor wrote: > The entire QRUNNERS section on the machines looks like this: > > QRUNNERS = [ > ('ArchRunner', 3,0,3), # messages for the archiver ... OK. That's as it should be. > Per your ps command, on this machine I get: > > list 11516 11512 0 08:

Re: [Mailman-Users] Problems with multi-machine slicing

The entire QRUNNERS section on the machines looks like this: QRUNNERS = [ ('ArchRunner', 3,0,3), # messages for the archiver ('BounceRunner', 3,0,3), # for processing the qfile/bounces directory ('CommandRunner', 3,0,3), # commands and bounces from the outside world ('Inc

Re: [Mailman-Users] Problems with multi-machine slicing

On 05/24/2014 07:52 AM, Jeff Taylor wrote: > After doing some upgrades, I noticed yesterday that my multi-machine > setup is no longer properly slicing the queue between machines. I > probably missed something, but after going through all my notes on the > setup I cannot figure out what the proble

[Mailman-Users] Problems with multi-machine slicing

After doing some upgrades, I noticed yesterday that my multi-machine setup is no longer properly slicing the queue between machines. I probably missed something, but after going through all my notes on the setup I cannot figure out what the problem in. Hopefully someone else can spot the issu

Re: [Mailman-Users] problems with bounce processing

On 11/20/2013 07:57 AM, Christopher Adams wrote: > > So, any idea of what might of happened to gum it up. Thanks for taking > the time to address this issue. It seemingly has corrected itself. It appears that BounceRunner had died for some reason. To understand more, I'd need to see the full Mai

Re: [Mailman-Users] problems with bounce processing

Mark, I had restarted Mailman several times and still, bounce processing was not taking place and the bounce log had not been written since 11/13. Before I left last night, I restarted it and then I noticed a flurry of activity, with queued bounces being processed. I hadn't looked in the /qfiles/b

Re: [Mailman-Users] problems with bounce processing

On 11/19/2013 03:35 PM, Christopher Adams wrote: > There is no bounce score entry in the bounce log. As it turns out, there > has not been a bounce log generated since 11/13. > > Would BounceRunner show in a list of processes. If so, I don't see it. ps -fwC python or ps -fwu mailman should sho

Re: [Mailman-Users] problems with bounce processing

There is no bounce score entry in the bounce log. As it turns out, there has not been a bounce log generated since 11/13. Would BounceRunner show in a list of processes. If so, I don't see it. Here is an entry in the qrunner log related to BounceRunner: Nov 19 04:02:36 2012 (29791) Master qrunn

Re: [Mailman-Users] problems with bounce processing

There is no bounce score entry in the bounce log for that post, or for probably any posts. There is nothing in the error log about bounces. The only entry in the qrunner related to BounceRunner is at 4:02 am every day: Nov 19 04:02:36 2012 (29791) Master qrunner detected subprocess exit (pid: 27

Re: [Mailman-Users] problems with bounce processing

On 11/19/2013 12:59 PM, Christopher Adams wrote: > > Looking at some older bounce logs, it appears that a few entries for > bounce score appear, but not as many as I would expect. Additionally, > nobody is being tagged as (B) bounce in the membership list. If there is a bounce score entry in the

Re: [Mailman-Users] problems with bounce processing

Mark, Here is a log that shows a message sent to the 'test7' list. The list is set up for bounce processing and all notifications are set to 'yes'. This is happening with the entire system, not just individual lists. It doesn't seem to be processing bounces. The bounce.log,which rotated at 4 am th

Re: [Mailman-Users] problems with bounce processing

On 11/19/2013 11:26 AM, Christopher Adams wrote: > > I am having some problems with bounce processing working correctly. If I > set a list so that a max bounce score < 1 ( .1 in this case). So, the > expectation is that the subscriber's account will immediately be tagged as > 'No Mail" by Bounce

[Mailman-Users] problems with bounce processing

Hello, I am having some problems with bounce processing working correctly. If I set a list so that a max bounce score < 1 ( .1 in this case). So, the expectation is that the subscriber's account will immediately be tagged as 'No Mail" by Bounce (B). That is not happening. In addition, the bounce

Re: [Mailman-Users] Problems seeing Archive, after setting to private, then back

On 10/12/2013 11:03 PM, Jake Overton wrote: > > Here is my problem: > I turned the archive_private option to private (thinking that this meant > that it is private from the internet) private means the archive is accessible only to list members who authenticate with their list member address and

Re: [Mailman-Users] Problems seeing Archive, after setting to private, then back

Hi Jake: I see that as a common issue on cPanel servers. Have your webhost check the symlink and its permission that is setup in the public archive directory. Typically the symlink permission is easy to fix but has to be done by your hosting provider if you don't have root access. *Brian Carpe

[Mailman-Users] Problems seeing Archive, after setting to private, then back

Hi Everyone, Sorry for having a make a new posting. I have searched the archives, etc and not been able to find a previous posting about this problem. Here is my problem: I turned the archive_private option to private (thinking that this meant that it is private from the internet) Now when I tur

Re: [Mailman-Users] Problems after server migration

Is it possible that the new server has two installations of Mailman in different locations, and the one referenced by the startup script (that can't find the lists) is different from the one you are accessing manually? Glen > From: a...@alv.cl > Subject: Re: [Mailman-Users] Pro

Re: [Mailman-Users] Problems after server migration

On Tue, 16 Jul 2013 at 6:42pm, Mark Sapiro wrote: [...] If you are running SELinux, try disabling it. Mark, you rock :-) That was it! Thank you very much! -alv- -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.

Re: [Mailman-Users] Problems after server migration

On 07/16/2013 05:38 PM, a...@alv.cl wrote: > On Tue, 16 Jul 2013 at 12:28pm, Mark Sapiro wrote: > >> Does 'bin/dumpdb lists/LISTNAME/config.pck' produce appropriate output >> for both old and new lists? > > They both seem consistent. Is there anything in particular I should look > more carefully?

Re: [Mailman-Users] Problems after server migration

On Tue, 16 Jul 2013 at 12:28pm, Mark Sapiro wrote: This makes no sense. Yes, that's why I'm so puzzled. Does bin/list_lists list both the old and the newly created, working lists? Yes. Are the mode and group of the lists/LISTNAME directories and the lists/LISTNAME/config.pck files the

Re: [Mailman-Users] Problems after server migration

On 07/16/2013 07:47 AM, a...@alv.cl wrote: > On Mon, 15 Jul 2013 at 10:12pm, Mark Sapiro wrote: > >> My best guess is your CentOS mailman (a RedHat package ?) doesn't >> expect the lists to be in the directory you moved them too. The FAQ at >> may help. > > Thank you

Re: [Mailman-Users] Problems after server migration

On Tue, 16 Jul 2013 at 10:10am, Barry S. Finkel wrote: Does Postfix know where your Mailman alias file is? Does that alias file contain aliases for all of your lists? Have you run the newaliases command? --Barry Finkel Hi Barry, Yes, postfix has all the Mailman alias. In fact, the error messa

Re: [Mailman-Users] Problems after server migration

On 7/15/2013 9:49 AM, a...@alv.cl wrote: Hi, I just migrated my mailman installation from an old fedora server to a new centos server. I followed the instructions described here: http://mail.python.org/pipermail/mailman-users/2007-January/055208.html The URLs remained the same, but the IP ch

Re: [Mailman-Users] Problems after server migration

On Mon, 15 Jul 2013 at 10:12pm, Mark Sapiro wrote: My best guess is your CentOS mailman (a RedHat package ?) doesn't expect the lists to be in the directory you moved them too. The FAQ at may help. Thank you for answer, Mark. When I created a test list after the

Re: [Mailman-Users] Problems after server migration

On 07/15/2013 07:49 AM, a...@alv.cl wrote: > > I just migrated my mailman installation from an old fedora server to a > new centos server. [...] > If I try to start the mailman service, it says: > > # service mailman start > Starting mailman: Site list is missing: mailman > > If I run list_lists

[Mailman-Users] Problems after server migration

Hi, I just migrated my mailman installation from an old fedora server to a new centos server. I followed the instructions described here: http://mail.python.org/pipermail/mailman-users/2007-January/055208.html The URLs remained the same, but the IP changed. If I try to start the mailman se

Re: [Mailman-Users] Problems with Mailman LDAPMemberships Adapter

Hi Mark, I don't know about others but I still use the LDAP adapter here. And I still appreciate the assistance you gave to get it working. Thanks again, Chris On 6/5/2013 5:47 PM, Mark Sapiro wrote: On 06/05/2013 08:29 AM, Lennart Barfod wrote: Hi Mark, I'm using the LDAPMembership.py Ver

Re: [Mailman-Users] Problems with Mailman LDAPMemberships Adapter

Hi Mark, thank you very much for your help! Now it works! And thanks for fixing it at launchpad. King regards, Lenni Am 06.06.2013 um 02:47 schrieb Mark Sapiro : > On 06/05/2013 08:29 AM, Lennart Barfod wrote: >> Hi Mark, >> >> I'm using the LDAPMembership.py Version 0.63. >> >> Yes I resta

Re: [Mailman-Users] Problems with Mailman LDAPMemberships Adapter

On 06/05/2013 08:29 AM, Lennart Barfod wrote: > Hi Mark, > > I'm using the LDAPMembership.py Version 0.63. > > Yes I restartet mailman some times after adding the extend.py. > > Ok, so I should reinstall mailman and Python-ldap? Or where seems to be the > problem? There seems to be a serious

Re: [Mailman-Users] Problems with Mailman LDAPMemberships Adapter

On 06/05/2013 03:04 AM, Lennart Barfod wrote: > > So know I want to use the LDAP Extension > (https://bugs.launchpad.net/mailman/+bug/558106) to build my mailingliste in > LDAP. > After some problems with Python-ldap now i configured a mailinglist "test" > and created a extend.py file in the Li

Re: [Mailman-Users] Problems with Mailman LDAPMemberships Adapter

Hi Mark, I'm using the LDAPMembership.py Version 0.63. Yes I restartet mailman some times after adding the extend.py. Ok, so I should reinstall mailman and Python-ldap? Or where seems to be the problem? Am 05.06.2013 um 17:21 schrieb Mark Sapiro : > On 06/05/2013 03:04 AM, Lennart Barfod w

[Mailman-Users] Problems with Mailman LDAPMemberships Adapter

Hi community, I've installed mailman (Version 2.1.12) at my CentOS 6 server and in gernerally it works fine. So know I want to use the LDAP Extension (https://bugs.launchpad.net/mailman/+bug/558106) to build my mailingliste in LDAP. After some problems with Python-ldap now i configured a maili

Re: [Mailman-Users] Problems updating virtual-mailman

Great Mark!! That solved my problem! Thanks! On Thu, Apr 25, 2013 at 1:57 PM, Mark Sapiro wrote: > Walter Justet wrote: > > > >I have in my mm_cfg.py > >MTA = 'Postfix' > >POSTFIX_STYLE_VIRTUAL_DOMAINS = ['my.domain.com'] > > > Which means Mailman will generate virtual_mailman entries for thos

  1   2   3   4   5   6   7   >