If someone posts an attachment to an umbrella list, will the
subscribers to the sublists be able to access the umbrella attachment
archive? Or should umbrella lists never use scrubbing?
Thanks,
Rich
--
Mailman-Users mailing list
Mailman-Users@p
Mark Sapiro wrote:
> Mike Peachey wrote:
>> I'm using this anyway :-)
>>
>> if msg.has_key('x-no-subject-prefix') and msg.get('x-no-subject-prefix',
>> '').lower() == 'yes':
>
>
> You don't need to test separately for the presence of the header.
> That's what the second argument to msg.get() is
Mike Peachey wrote:
>
>I'm using this anyway :-)
>
>if msg.has_key('x-no-subject-prefix') and msg.get('x-no-subject-prefix',
>'').lower() == 'yes':
You don't need to test separately for the presence of the header.
That's what the second argument to msg.get() is for. It is returned
when the heade
Mark Sapiro wrote:
> Mike Peachey wrote:
>
>> Mark Sapiro wrote:
>>> and add two lines after the comment so it becomes
>>>
>>> def prefix_subject(mlist, msg, msgdata):
>>> # Add the subject prefix unless the message is a digest or is being
>>> fast
>>> # tracked (e.g. internally crafted, d
Mike Peachey wrote:
>Mark Sapiro wrote:
>>
>> and add two lines after the comment so it becomes
>>
>> def prefix_subject(mlist, msg, msgdata):
>> # Add the subject prefix unless the message is a digest or is being
>> fast
>> # tracked (e.g. internally crafted, delivered to a single user
Mark Sapiro wrote:
> Find the lines (watch for wrapping)
>
> def prefix_subject(mlist, msg, msgdata):
> # Add the subject prefix unless the message is a digest or is being
> fast
> # tracked (e.g. internally crafted, delivered to a single user such
> as the
> # list admin).
> prefi
Mike Peachey wrote:
>
>I have managed to stop all sub-lists from re-archiving mails that have
>been through higher lists by adding an X-No-Archive to mails as soon as
>they're archived so that they only get archived once.
>
>However, Subject Prefixes are giving me a little more hassle.
>
>Current
Mailman Ver: 2.1.5
Our company now exclusively uses Mailman for it's departmental mailing
lists and it's done through umbrella lists set up in the same way as the
org chart for the company.
I have managed to stop all sub-lists from re-archiving mails that have
been through higher lists by add
Lech Karol PawBaszek wrote:
>
> What i would like is to have "true lists" only at the lowest level. But
> be able to accept incoming mail at the highest level and not to worry
> about accepting the same mail on the other lists (if it is not from my
> company domainname).
>
> I've tried accepta
Hello,
I have a problem with setting up an umberlla list. I know it is wrong
and i should not use umbrella list, but (i think) i really have to. If
anyone has any other solution to my problem - i'm listening.
I want to have "mutliple level" list. At the very moment my company uses
"announce" l
Douglas B. Jones wrote:
>
>I am using "Using Mailman version: 2.1.5" on rhel4 (what comes
>with the box). I am want to set up a list, call it U1, that is
>an umbrella list to list L1, L2 and some individual subscribers
>S1 and S2. Can an umbrella list be set up this way, or is all
>or nothing - ie:
I am using "Using Mailman version: 2.1.5" on rhel4 (what comes
with the box). I am want to set up a list, call it U1, that is
an umbrella list to list L1, L2 and some individual subscribers
S1 and S2. Can an umbrella list be set up this way, or is all
or nothing - ie: all the subscribers are eithe
Allan Trick wrote:
>I have a new request to
>create an intermediate list now. This would require an umbrella
>address like we have now, but then it contains two OTHER umbrella
>lists, which then go to actual lists.
>
>Does Mailman allow an umbrella list within an umbrella list?
Absolutely. I
I've got about 20 lists contained within a smaller number of umbrella
lists which enables our users to message people on multiple lists by
addressing a more compact single address. I have a new request to
create an intermediate list now. This would require an umbrella
address like we have now
Lori Christensen wrote:
>None of the sub-lists that are members receive their email from umbrella
>list.
>
>Example: umbrella list name- campusfac-l
>
>Membership for this list is
>Hum-l
>Soc-l
>Sci-l
>
>(these all have campusfac-l under recipient filter- Alias names
>(regexps) which qualify as ex
John Adamski wrote:
>
>After more research it looks like the issue is between our exchange
>server and mailman. Exchange is holding all emails in a queue and
>getting error 'The remover server did not respond to a connection
>attempt.'
>
>So far I have not found out why exchange can't connect or
exact
error it is getting when it tries to connect.
Has anyone ever had a similar problem?
John
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Mark Sapiro
Sent: Wednesday, May 17, 2006 6:10 PM
To: Lori Christensen; mailman-users@python.org
Subject: Re:
Lori Christensen wrote:
>
> We are currently trying to implement mailman lists on
>our campus. Implementation of normal lists has gone well but when we
>try to set up an umbrella list it doesn't seem to work. It shows the
>lists as subscribed to the main list and we've set the privac
We are currently trying to implement mailman lists on
our campus. Implementation of normal lists has gone well but when we
try to set up an umbrella list it doesn't seem to work. It shows the
lists as subscribed to the main list and we've set the privacy options
but somewhere we m
Paul Williams wrote:
>
>Suffix for use when this list is an umbrella for other lists,
>according to setting of previous "umbrella_list" setting
>set at
>
> -owner
>
>This causes a problem when adding in subscribers
>using the Mass Subscription option and you want the
>user to "Send welcome
I have an Umbrella list which has both
lists and subscribers as members of the list.
The default setting for an Umbrella list is
Suffix for use when this list is an umbrella for other lists,
according to setting of previous "umbrella_list" setting
set at
-owner
This causes a problem wh
Gary Casterline wrote:
>
>We've set up chain of hierarchical lists to accommodate annual groups.
>Each year we create a list for the new cohorts:
>
>[EMAIL PROTECTED]
>[EMAIL PROTECTED]
>[EMAIL PROTECTED]
>
>and then add the new class-of list to the umbrella list:
>
>[EMAIL PROT
We've set up chain of hierarchical lists to accommodate annual groups.
Each year we create a list for the new cohorts:
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
and then add the new class-of list to the umbrella list:
[EMAIL PROTECTED]
Each list is set to allow
Greetings:
I have an umbrella list that I can't quite configure exactly
the way I want.
Here is the situation:
List STAFF contains list STUDENTS and list ADMINS
Currently, STUDENTS and ADMINS have aliases set so email for
STAFF is accepted, which is fine.
The problem is that when external emai
: http://XYZservers.com/hosting
--
From: Dan Phillips <[EMAIL PROTECTED]>
Date: Mon, 25 Jul 2005 22:24:21 -0500
To: Marc Silverman <[EMAIL PROTECTED]>
Subject: Re: [Mailman-Users] Umbrella Lists
On Jul 25, 2005, at 10:19 PM, Marc Sil
Marc Silverman wrote:
> Forgive me if I didn¹t locate a solution to this I did find some posts
> about Umbrella Lists, but nothing addressed my problem:
>
> I have a dozen mailing lists.
> I created an Umbrella List to post to all of them.
> The posts go out, but each separate list Holds the mes
Forgive me if I didn¹t locate a solution to this I did find some posts
about Umbrella Lists, but nothing addressed my problem:
I have a dozen mailing lists.
I created an Umbrella List to post to all of them.
The posts go out, but each separate list Holds the message for Admin
Moderation:
Reason:
Peter Schneider-Kamp wrote:
>
>Is there nowadays a good way of avoiding dupes, i.e., multiple posts of
>the essentially same message to one list?
Not that I know of.
>Also, I would like to have some umbrella lists. I have found an
>old thread in the archives (from April 2001) which proposes
>sync
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
Is there nowadays a good way of avoiding dupes, i.e., multiple posts of
the essentially same message to one list?
Also, I would like to have some umbrella lists. I have found an
old thread in the archives (from April 2001) which proposes
syncing the
Hi,
Is there any way to set up an umbrella list so that the members of the
sub-lists can post to each other?
Thanks,
Alice G.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: h
I am currently installing Mailman as a replacement for majordomo. Mostly
everything is going smoothly.
I have a question regarding umbrella lists. I have 4 "real" mailing lists
and 5 aliases that redirect to some or all of these lists.
For the sake of explanation let's call the "real" lists :
I have a mild inconvenience here, and was wondering if there's a simple
way around it.
For our department, I have setup lists for each class of users
(undergraduates, grad students, faculty, etc), and an umbrella list to
cover all the users. There are some mails that are sent out to the all
u
On Thu, 2003-10-23 at 10:14, Dave Stern - Former Rocket Scientist wrote:
> We've had probs with nested lists in the past. I think the issue had to do
> with private lists (ie only members can post) for both the sublist(s) and
> the umbrella list. If set, how could a member of a sublist post to the
We've had probs with nested lists in the past. I think the issue had to do
with private lists (ie only members can post) for both the sublist(s) and
the umbrella list. If set, how could a member of a sublist post to the
umbrella list unless either the umbrella list was unrestricted or the
user was
Hi -
My host provider includes one Mailman list as part of my email package. However,
their site control interface doesn't provide much by way of help for list owners, so
I'm wondering if you can assist me.
I'm interested in umbrella lists, which is mentioned briefly in the Mailman
documenta
Sounds like you will be fine! An umbrella list is meant for you.
Do test it out with some test lists first. You'll need to alert the
sub-lists that they may get a message that says it's to , and the sub-lists will need to accept that message as though it
were sent directly to the list. Beyond th
Hi,
I've read in the mail archive about some problems people have had creating
umbrella lists. So I wanted to just check and make sure I'm doing this the
right way before I make a mess on my own server!
I work at a school and I have a list of parents at each grade level for the
teachers to us
We've discussed this on the list before as well. The key is to replace
the -unsubscribe alias with a script that finds the email address in one
of the sublists and then either unsubscribe them from the sublist, or
sends them back a URL that points to the web-based unsubscribe for the
user.
Someth
Hello!
Need some help with umbrella lists (I think it was discussed
earlier in the list but it is not covered in the umbrella faq):
For example I have an umbrella list U, which has members - the
email addresses of other lists - A, B, C. I configured A, B, C
to receive
Version 2.0.x won't de-dup. Read the FAQ entry:
http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.005.htp
Good luck - Jon Carnes
On Fri, 2002-12-06 at 15:03, Sandy Hansen wrote:
> Here's a query probably addressed in documentation, but there is so much
>
> documentation to plow throu
Here's a query probably addressed in documentation, but there is so much
documentation to plow through, thought a quick query might be a more
efficient
use of my limited time.
I have installed seven Mailman lists on a website I maintain. If I set
up an
umbrella list, will it de-dup names, since
> "SW" == Sarah Walters <[EMAIL PROTECTED]> writes:
SW> As far as I can tell, Mailman does not have proper support for
SW> umbrella lists.
FWIW, I don't like the design of the current umbrella list feature. I
believe I know the way to do such things better, but it will have to
wait
As far as I can tell, Mailman does not have proper support for umbrella lists.
We have a need for lists that are aggregations of other lists.
EG: all_general_staff might look like:
:include:/packages/majordomo/lists/dept1_staff
:include:/packages/majordomo/lists/dept2_staff
:include:/packages/maj
to or cc destination names
for this list. (Details)
Good Luck - Jon Carnes
- Original Message -
From: "Chris Delp" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 14, 2002 3:26 PM
Subject: [Mailman-Users] umbrella lists
> im trying to set up a
im trying to set up an umbrella list for a group of lists i have, but
but the posts from the umbrella list keep getting held for approval by
the under lists. any idea why this would happen?
--
Christopher L Delp
Website Administraitor
ASCYPAA Advisory Council
[EMAIL PROTECTED]
[EMAIL PROTECTED
I don't quite understand how to do an umbrella list.
I I have 3 lists ListA ListB and ListC
I have another list ListABC that sends to the other three lists.
I want to be able to send to ListABC - but when I do - the message gets
moderated. And I can't seem to get past that even though I'm runni
I can't seem to find documentation on this.
I have 3 lists ListA ListB and ListC
Now I want to make an umbrella list - ListABC
I want it so that only members of ListA - ListB and ListC can send to
ListABC
How do I do that?
--
Mailman-Users
On Thu, Apr 19, 2001 at 11:49:10AM -0700, Marc MERLIN wrote:
> On Thu, Apr 19, 2001 at 02:15:28PM -0400, [EMAIL PROTECTED] wrote:
> > Example:
> > Umbrella list A has three sublists A1, A2, and A3 subscribed to it.
> > [EMAIL PROTECTED] is subscribed to lists A1 and A3. When a message is
> > sen
48 matches
Mail list logo