Hi,
I was wondering if there is anybody out there who has had good result with
calling the Crystal Report API functions from within MapBasic.
I'm strugling quite a bit with these function and most of my work is doing
OK,
the only problem I'm still having is that I can't seem to be able of
Hello List,
Can any body explain to me what is datum, and where can i change it in
MapInfo. As i undestand datum transformatin needed only when i want to
jump from one ellipsoid to another. Is it right?
I've found some information about datum i need (Pulkovo 1942) in
LocalCoordSysDefs.fme file
Is there any way to "customize" to distance between the
created point and the polyline to which it is attached, when performing a
geocoding task using a complete address (fromleft, toleft,... and so on)
?
In other terms, is there a "hidden parameter" for the MapBasic
FIND function ?
Hello all,
I'm trying to produce a MapXtreme mapping application that will let users
save and restore map information as geosets to a file location.
Unfortunately it appears that unless the geoset file is located in the the
same directory as the dictionary then a geoset loaded using the
Hi Listers
an object geography type question for y'all
I have a set of polygons and a set of polylines. The objects in the polyline
table fall into two categories. One lot run contiguous to the boundaries of
the Polygon coverage (imagine the Polygon covergae after a 'convert to
polylines'
You need to create a view, similar to a StreetInfo table
create view MyView as select * from TableOdbc, TableMap where
TableOdbc.UniqueField = TableMap.UniqueField
The process is very fast even with large tables. Later, you can even
create a .tab file that opens as a regular mapinfo table.
Dear all,
A quick summary of the responses I recieved for the interested
parties is as follows:
Basically I have been alerted to the fact that the "Contains"
operator is a geographic operator and therefore cannot query text
strings...Typical! So heres what I should have done and have since
you can buy maptitude for $300 or so, and then they sell block group data
for the us (1 CD) for about $300. it reads and writes mid/mif and a bunch of
other formats as well. they don't have every data item though, so you should
check to see if they have what you need. The block group cd is a
Thanks to all the many people who responded:
Commercial offerings, like DataMetrix and Channel Marketing had what I
needed and more for $250 (minimum order size), and included forecasted
data. Geolytics also has this for sale.
Many offered to send me the data for free.
Others sent URL's
Amigos listeros :
les escribo para solicitarles informacion
sobre unos archivos *.bin del software PLANET V.2.8 que corre en
Solaris,
asi como podria leerlos desde un pequeño script para poder
extraer informacion de sus puntos(coordenadas longitud,latitud, y
altura)
Este software es
unsubscribe MAPINFO-L
Mathieu Avery
Analyste
Les Systemes Teldig inc.
Tel: (418) 650-5500 Ext: 236
[EMAIL PROTECTED]
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the
Hello All,
Further to below, I think maybe I should explain why... I'm trying to
embed the full path name of the geoset currently in use within hidden form
variables on the page. I'd like to do this by accessing the PathName
property of the geoset ie
Sorry Rich, I don't have an answer for your problem.
What I do have is a request for suggestions for the best method
to get from a MapInfo layout to something that can be read by
Adobe Acrobat - Distiller.
Thanks all.
-Original Message-
From: Richard Greenwood [mailto:[EMAIL
Dear Experts,
I have a mappable table with exactly coincident regions, with query select
I make selections on the basis of data in various fields.
The problem is that where even numbers of coincident regions are selected
no selection pattern appears for those regions in the mapper.
Is there a
Does anyone know of a data source for US Time Zones in DD NAD83?
Tim Keane
GIS Coordinator
govWorks, Inc.
81 FRANKLIN ST
NEW YORK, NY 10013
phone: 212.941.6900x221
fax: 212.208.4472
mailto:[EMAIL PROTECTED]
http://www.govWorks.com
Hello everyone,
I've been having a recurring, but intermittent, problem printing complex
plots with my Designjet 650C. I know I don't have enough printer memory
for the plot, so I use the "process in computer's memory" selection. The
computer(P550) has 128MB of ram. I'm using MI 4.5. Output size
Listers;
Does anyone know of a way to convert .grc files produced by dB Planner into
tables that can be opened in MapInfo? Any help would be greatly appreciated.
Thanks,
Bruce B. Blais
Director - Network RF Engineering
--
To
Old columns of mine (including Uzbekistan) can be
downloaded (for free) from the "Grids and Datums" section
at:
http://www.asprs.org.resources.html
Be careful what you say in public (over the internet) about
System 42. It is still a State Secret in your country, and
the
Tim,
I ran into the same thing yesterday. There are plenty of sources that you can buy the
Time Zones from, at prices ranging from $9.95 to $150, but if you're thrifty you can
download them from:
http://www-atlas.usgs.gov/atlasftp.html
It's in Shapefile format, so you'll need to run it
The follwing urls are all reported to have time zone data
I downloaded a pretty good one for free at directionsmag.com
http://www.stopwatchmaps.com
www.directionsmag.com
http://software.geocomm.com/data/intl_timezones.html
http://www-atlas.usgs.gov/atlasftp.html
Thanks to...
Scott Elliot
I have had good success with using HP printer drivers (running MI 5.0 on
NT4 I use HP2500cp driver). The files are saved as postscript and distiller
3.01 reads then no probs.
I do admit that we only generate these to enable PDF files to be created for
general use not for high end production -
Go to the Vertical Mapper web site and there is a MBX file that will allow
reading the raster files by MapInfo.
-Original Message-
From: Bruce Blais [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 17, 2000 1:23 PM
To: Mapinfo List (E-mail)
Subject: MI Converting .grc files
Listers;
I am unclear on the ability of MI/MapX to store attribute data in a remote
database. When you use "File save as" and select a MDB or dbf file, no dat file
is created. When you open a DBMS table into MapInfo, MI makes a .dat file.
So, can you attach to a table in another database without
From the DUOH!, slap-to-the-forehead department...
Yesterday, I re-ordered a table (232 rows, 2 cols - name number) so the
records would be in numeric order.
Today, I opened a workspace created previously which opens and displays the
newly re-ordered table. I had used the workspace to move
We are having problems with the management of our
data files across the network. Generallywe want toensurethat
the author of the layer are the only people who modify it. As it is, we can only
rely on people to do the right thing, but unfortunately this does not always
occur (especially with
Thomas Misek wrote:
Sorry Rich, I don't have an answer for your problem.
What I do have is a request for suggestions for the best method
to get from a MapInfo layout to something that can be read by
Adobe Acrobat - Distiller.
?? Print directly to Acrobat Distiller or PDFWriter, it's the
Knowing my luck the original email I sent will appear a few seconds after I
send this. However as I haven't (yet) seem this come through I will send it
again.
Cheers/Apologies
Martin
==
Martin Roundill
GIS Manager
Waitakere City Council
Private Bag 93109
Tim,
Looks like you managed to find some good sources of data. I must have
missed your original thread as I would have pointed you to a recent
feature we did on Time Zones and time zones data sources. Noetheless,
you can check it out at http://www.spatialnews.com/features/timezones/
Regards
This isn't really much of a summary, but I may be getting a bit closer to
solving my problem; it seems to work under Win95, but not under NT. I
hesitate say that with any certainty because there are so many variables,
but I have tested it on two NT machines and one Win95 machine, using
version of
The RPM Information Network at http://rpmconsulting.com has just updated the
GIS Website Ratings for February, 2000.
This year, we have added a suite of format tests to help webmasters improve
their document, table and form structure and image syntax. This makes pages
load more correctly and
Hi all,
If you read the question again, you will understand what he is
asking! I believe there is a tool built into Vertical Mapper that will
convert( or contour) a .grc to a polygon-based Tab file, not a grid file.
The mbx you refer to will only allow for viewing the grid, not query or
Subject: RE: MI Managing file
--
If your files are stored on a network drive and you run NT you can utilise
the NT file security options to allow only certain people access to file.
This can include different levels of security i.e.: allowing only certain
people editable
Dear friends,
I have created a query:
select all from redtable, blue table
where redtable . field1 = blue table . field1
which works fine, however I cannot save the query as a
table, I get an "unable to save table" message.
When I save the query it does not save all fields,
as expected it
I have found that Distiller gives far better resolution than PDFWriter.
Jo Ellen Brandmeyer
--
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact
34 matches
Mail list logo