Ya but they arent in the same budget category. :D I am trying other
red wines now and seeing how it goes. Next week is beer. Then another
week of no alky.
I check my bp when I got home after doc, it was 137/80summin and then
125/79 before bedtime (after wine and dinner). Not sure when I shoul
Switch to Yellow Tail or Little Penguin, you'll feel a lot better. ;)
Walt
On Tue, Oct 12, 2010 at 5:00 PM, Rolf wrote:
> Venison is on the plate tonight!
>
> Checked in with doc on Monday and my BP was 120/80. No drugs, just diet. I
> am on a hunch that an additive in a particular red wine (2b
Venison is on the plate tonight!
Checked in with doc on Monday and my BP was 120/80. No drugs, just diet.
I am on a hunch that an additive in a particular red wine (2buck Chuck
from TJ) might be the source of my problems. I might be completely
wrong. Got a monitor and trying to figure out wha
Too much, but they claim you get the same protein per dollar - though I have
my doubts. I;ll pay attention next time and report back.
On Fri, Oct 8, 2010 at 5:59 PM, Kaleb C. Striplin wrote:
> how much does it cost?
>
>
> On 10/5/2010 8:53 PM, OK Don wrote:
>
>> We buy pure buffalo meat in a lo
how much does it cost?
On 10/5/2010 8:53 PM, OK Don wrote:
We buy pure buffalo meat in a local market (grown locally as well), very
lean and VERY tasty.
On Tue, Oct 5, 2010 at 11:53 AM, Curt Raymond wrote:
You've clearly never consulted a dietitian. They'll tell you that you can
have 4oz of
Manual Flywheel Measurements
He's talking bout the std forum.
Walt
On Oct 5, 2010 4:28 PM, "Mitch Haley" wrote:
Rolf wrote:
>
> If your interested in squeezing some performance beyond good
> maintenance,
its the be...
Are you talking about schumanautomotive.com???
I
We buy pure buffalo meat in a local market (grown locally as well), very
lean and VERY tasty.
On Tue, Oct 5, 2010 at 11:53 AM, Curt Raymond wrote:
> You've clearly never consulted a dietitian. They'll tell you that you can
> have 4oz of filet once a month.
>
> I got some "beefalo" last weekend.
He's talking bout the std forum.
Walt
On Oct 5, 2010 4:28 PM, "Mitch Haley" wrote:
Rolf wrote:
>
> If your interested in squeezing some performance beyond good maintenance,
its the be...
Are you talking about schumanautomotive.com???
I'm pretty sure Meade/Max was.
Mitch.
___
Rolf wrote:
If your interested in squeezing some performance beyond good
maintenance, its the best place on the net.
Are you talking about schumanautomotive.com???
I'm pretty sure Meade/Max was.
Mitch.
___
http://www.okiebenz.com
For new and used parts go
x27;m glad I never heard of it.
-Max
-Original Message-
From: mercedes-boun...@okiebenz.com
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of Rolf
Sent: Monday, October 04, 2010 4:18 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Bonehead Doctor.
arnoch
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Message-ID:
Content-Type: text/plain; charset=ISO-8859-1
Steak is good, just need to do the proper marinade with it and have the
right cuts. ;)
Walt
On Oct 4, 2010 10:17 PM, "Rolf" wrote:
--Original Message-
> From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On
> Behalf Of Curt Raymond
> Sent: Tuesday, October 05, 2010 12:54 PM
> To: Diesel List
> Subject: Re: [MBZ] 617 Manual Flywheel Measurements
>
> You've clearly never co
he
dutch oven, very nice. Easy to overcook though.
Even a dietitian will allow you game meat...
-Curt
Date: Mon, 4 Oct 2010 22:20:08 -0400
From: Walt Zarnoch
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Message-ID:
Content-Type: text/plain; charset=ISO-88
, very nice. Easy to overcook though.
Even a dietitian will allow you game meat...
-Curt
Date: Mon, 4 Oct 2010 22:20:08 -0400
From: Walt Zarnoch
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Message-ID:
Content-Type: text/plain; charset=ISO-8859-1
Steak i
On Mon, Oct 4, 2010 at 7:20 PM, Walt Zarnoch wrote:
> Steak is good, just need to do the proper marinade with it and have the
> right cuts. ;)
>
Amen to that, a nice lean piece of top loin or similar cut is lower in
fat and higher in protein than chicken breast, and becomes much more
interesting
Thanks to both of you, sounds like I'm glad I never heard of it.
-Max
-Original Message-
From: mercedes-boun...@okiebenz.com
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of Rolf
Sent: Monday, October 04, 2010 4:18 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 M
Steak is good, just need to do the proper marinade with it and have the
right cuts. ;)
Walt
On Oct 4, 2010 10:17 PM, "Rolf" wrote:
I had already been changing my diet. I'm around 140/70 ish most of the time
and sinking. I'm focusing on more exercise and deep breathing/meditation.
Apparently de
He was banned before this took place, whois record on std is from
2008. I honestly think hes either crazy (and not in a half hearted way)
or has a serious drug problem. I know crazy and he certainly acts the
part. Not having met him I can't make a full diagnosis.
-Rolf
On 10/4/2010 6:17 PM,
..
-Curt
Date: Mon, 04 Oct 2010 16:38:25 -0400
From: Rolf
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Message-ID:<4caa3b41.8060...@winmutt.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
33.
Rolf, overworked, overweight, high blood pre
-0400
From: Rolf
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Message-ID: <4caa3b41.8060...@winmutt.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
33.
Rolf, overworked, overweight, high blood pressure, 2 mortgages, 2 kids
and a wife wh
Rolf wrote:
Bonehead Doctor. FI can be an ass but hes atleast rational. BHD and
Schuman like cooking in the bathtub I think.
I noticed that BHD is banned at peachparts, since 2006. Was that about the time
that Schumann' site fell apart?
Mitch.
___
http:
Dang, I was close!
Walt
On Mon, Oct 4, 2010 at 4:38 PM, Rolf wrote:
> 33.
>
> Rolf, overworked, overweight, high blood pressure, 2 mortgages, 2 kids and a
> wife who has hidden the salt shaker.
>
> On 10/4/2010 4:36 PM, Walt Zarnoch wrote:
>>
>> You were 15 on the internet? That means you're at
33.
Rolf, overworked, overweight, high blood pressure, 2 mortgages, 2 kids
and a wife who has hidden the salt shaker.
On 10/4/2010 4:36 PM, Walt Zarnoch wrote:
You were 15 on the internet? That means you're at least 16 now, and
possibly as old as 58... :p
I'm guessing mid 30's...
Walt, who
You were 15 on the internet? That means you're at least 16 now, and
possibly as old as 58... :p
I'm guessing mid 30's...
Walt, who can't resist a "guess the age"
On Mon, Oct 4, 2010 at 4:18 PM, Rolf wrote:
> Bonehead Doctor. FI can be an ass but hes atleast rational. BHD and Schuman
> like co
Bonehead Doctor. FI can be an ass but hes atleast rational. BHD and
Schuman like cooking in the bathtub I think. They posted some image
somewhere with a ridiculous copyright notice (when I mean ridiculous it
covered like 50% of the image) and I mentioned that the copyright notice
was invalid.
Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 wrote:
What site are you referring to? If the MBCA forum, I can only speak for
myself. I found the transition away from vBulletin quite distressing.
http://www.schumanautomotive.com/forums/forumdisplay.php?f=19
, October 04, 2010 11:36 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Rolf wrote:
> Only our cars everything else is fair game.
BTW, which moderator(s) killed the other site?
It wasn't Forced Induction, was it?
Mitch.
Rolf wrote:
Only our cars everything else is fair game.
BTW, which moderator(s) killed the other site?
It wasn't Forced Induction, was it?
Mitch.
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.o
-boun...@okiebenz.com] On
Behalf Of Walt Zarnoch
Sent: Monday, October 04, 2010 8:07 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
It's SuperTurboDiesel.com
Happens to be one of the the best places for Benz diesel mayhem that I have
found.
Walt, who
t; Behalf Of Walt Zarnoch
> Sent: Monday, October 04, 2010 3:52 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] 617 Manual Flywheel Measurements
>
> Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and
> about 20 minutes after that I realized you were u
nal Message-
> From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On
> Behalf Of Walt Zarnoch
> Sent: Monday, October 04, 2010 8:07 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] 617 Manual Flywheel Measurements
>
> It's SuperTurboDiesel
I believe that would be Super Turbo Diesel, Rolf's website...
-Curt
Date: Mon, 4 Oct 2010 07:43:18 -0400
From: "Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310"
To: "Mercedes Discussion List"
Subject: Re: [MBZ] 617 Manual Flywhee
t message
>> part, was I!?
>>
>> -Max
>>
>>
>>
>> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch
>> Sent: Fri 10/1/2010 9:15 PM
>> To: Mercedes Discussion List
>> Subject: Re: [MBZ] 617 Manual Flywheel Me
ilto:mercedes-boun...@okiebenz.com] On Behalf Of Walt Zarnoch
> Sent: Monday, October 04, 2010 3:52 AM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] 617 Manual Flywheel Measurements
>
> Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and
> about 20 minu
Yabut what is "STD"?
-Max
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On
Behalf Of Walt Zarnoch
Sent: Monday, October 04, 2010 3:52 AM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Flywheel Measurements
Hah
> was I!?
>
> -Max
>
>
>
> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch
> Sent: Fri 10/1/2010 9:15 PM
> To: Mercedes Discussion List
> Subject: Re: [MBZ] 617 Manual Flywheel Measurements
>
>
>
> I've look
What is STD? Oh - sorry - I wasn't supposed to read the secret message part,
was I!?
-Max
From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch
Sent: Fri 10/1/2010 9:15 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 617 Manual Fly
Super secret message received! Over and out!
On 10/1/2010 9:15 PM, Walt Zarnoch wrote:
I've looked into butterfly, but it doesn't fully fit with what I need to do.
I'd much prefer a laptop with Inventor that I can fire up wherever,
and not need to worry about getting cellular/net reception or
I've looked into butterfly, but it doesn't fully fit with what I need to do.
I'd much prefer a laptop with Inventor that I can fire up wherever,
and not need to worry about getting cellular/net reception or dealing
with lag.
Walt
SECRET MESSAGE TO Rolf!
Plopped my request for measurements in a
Walt wrote:
> Inventor 2K11 Pro Educational
>
> Does all I need and more.
I don't play with parts - but I would do that if I had parts to make.
My son got quite proficient with Inventor 4 years ago working in
Columbus, OH.
Also, try butterfly.autodesk.com for cloud cad - I signed up and find
it a
Inventor 2K11 Pro Educational
Does all I need and more.
On Sep 30, 2010 7:50 PM, "Mountain Man" wrote:
Walt wrote:
> Here's what I've got so far.
Inventor?
or ProE?
mao
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list
Walt wrote:
> God knows I've got a lot of things I've misremembered in my short time
> on this earth...
That's a good thing, most times.
mao
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.co
Walt wrote:
> Here's what I've got so far.
Inventor?
or ProE?
mao
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okieben
No need to apologize, we all misremember things in our young age/old
age/middle age/age/time reference/etc.
God knows I've got a lot of things I've misremembered in my short time
on this earth...
Walt
On Thu, Sep 30, 2010 at 11:24 AM, Rolf wrote:
> I guess I have been talking out my a$$. I looke
I guess I have been talking out my a$$. I looked last night on a 190d fw
I have and sure enough it looks like its just the ring. I was basing my
prior statements on the fact that once upon a time (3
? years ago) I saw one in two pieces. I guess I just misremembered the
configuration, all apologi
I've got 3 buildings it could be in, so it could take a bit...
Here's what I've got so far.
Exploded view.
http://zarnochwf1.com/gallery2/v/V6_Truck/exp_view_1.png.html
Trans-side view of plate.
http://zarnochwf1.com/gallery2/v/V6_Truck/Mercedes_Adapter_Plate_3.png.html
Cutaway view of the stac
On Wed, 29 Sep 2010 01:21:17 -0400 Walt Zarnoch
wrote:
> And wouldn't you know, I find the TC and driven plate, but not the
> auto flywheel or bolts... And I was tripping over them a month back...
Keep looking, we're rooting for you!
Craig
___
http://www.ok
I am talking about the face plate and the rim. IIRC the ring gear was
one part with the face plate.
-Rolf
On 09/29/2010 11:51 AM, Dieselhead wrote:
You talking about the ring gear on the flywheel? Yes, the ring gear
is separate, but the flywheel is one piece.
I know for a fact that some of
You talking about the ring gear on the flywheel? Yes, the ring gear
is separate, but the flywheel is one piece.
I know for a fact that some of the manual trans flywheels for the
61X are two pieces, I have seen one with the ring separated.
-Rolf
On 09/28/2010 11:54 PM, Craig wrote:
On Tue,
The ring gears come off on most of them, the FSM has installation
instructions for them. iirc it's "heat to straw color, then press on"
Walt
On Wed, Sep 29, 2010 at 11:39 AM, Rolf wrote:
> I know for a fact that some of the manual trans flywheels for the 61X are
> two pieces, I have seen one wit
I know for a fact that some of the manual trans flywheels for the 61X
are two pieces, I have seen one with the ring separated.
-Rolf
On 09/28/2010 11:54 PM, Craig wrote:
On Tue, 28 Sep 2010 13:25:02 -0400 Rolf wrote:
I am 99.9% certain that the 300d and 240d use the same part for the
fl
And wouldn't you know, I find the TC and driven plate, but not the
auto flywheel or bolts... And I was tripping over them a month back...
Walt
On Wed, Sep 29, 2010 at 1:01 AM, Walt Zarnoch wrote:
> Hmm, now we're getting somewhere...
>
> Based on the crank flange's thickness of 12mm and the give
Hmm, now we're getting somewhere...
Based on the crank flange's thickness of 12mm and the given length of
20mm for the flywheel stretch bolts, it seems reasonable that the web
thickness is something around 7mm-8mm, depending on if the bolts go
through the flange fully or not.
I've already found t
On Tue, 28 Sep 2010 13:25:02 -0400 Rolf wrote:
> I am 99.9% certain that the 300d and 240d use the same part for the
> flyheel face, it is the outter ring that is different. They are not one
> piece flywheels.
Actually, the 0.1% just rose up and bit you. The flywheels really are one
piece. The
54 matches
Mail list logo
